D.A.S. INTEGRAL Series Instruction manual

QUICK USER’S GUIDE
INTEGRAL-M26X

FRONT PANEL
Meters referred to channel´s limiter threshold

OLED DISPLAY

NAVIGATION BUTTONS

DISPLAY OFF
PRESET NAME
IP ADDRESS
ID
QUICK ACCESS BUTTONS
MAIN MENU
INPUT GAIN
OUTPUT GAIN
INPUT MUTE
OUTPUT MUTE
OUTPUT DELAY
SRC SELECTION
LINK MANAGER
OUTPUT PRESET
GLOBAL PRESET
OPTIONS
“M” àmuted

REAR PANEL
INPUTS
OUTPUTS
ETH / ALMA
POWER SWITCH
GPIOs

MAIN MENU

PRESETS GLOBAL
USER / FACTORY

OPTIONS

INTEGRAL-M26X
NETWORK CONNECTIONS

REAR PANEL
-ETHERNET PORT
-ALMA CONTROL
-OSC CONTROL

NETWORK MENU (VIA DISPLAY)
-NETWORK ID
-STATIC IP
-DYNAMIC IP
SUBNET MASK use
always 255. 255. 255. 0
Network ID
When having more than one device,
ID numbers can not be equal; unique
ID number per device is required

STATIC IP - SWITCH
BASIC CONFIG -POINT TO POINT
(1 UNIT M26X)
ADVANCED CONFIG –SWITCH
(2 OR MORE UNITs M26X)
ID 1
ID 2
ID 3

DYNAMIC IP - ROUTER

STATIC IP – WIFI ROUTER (OSC CONTROL)
STATIC IP NEEDED (M26X) TO
CONTROL FROM THE MOBILE
DEVICE, VIA OSC, THE UNIT

STATIC IP – WIFI ROUTER (OSC CONTROL WITH WP3)

WIFI ROUTER CONFIGURATION (TP-LINK AC6)
2º)NEW ROUTER IP
3rd) DHCP SERVER:
NEW ROUTER IP RANGES
4th) WIFI NETWORK
(NAME AND
PASSWORD)
1º) ENTER 192.168.0.1