D-Link DSL-2750U Manual

Technical Support Setup Procedure
Manually Configuring Bridge Mode on the DSL-2750U
Step 1: Open a web browser such as Internet Explorer, Mozilla Firefox, Safari and etc. On the Address
bar type in the LA IP Address of the DSL-2750U which is 192 168 1 1 and then press on the Enter
key on your keyboard.
Step 2: A login screen will appear, type in the User ame and the Password as “admin” all in lower
case and then type in Validate Code and then click on the Log In button.
Step 3: Click on the SETUP tab and then select on Internet Setup on the left hand side. Under the
WA Setup, click on the button Add

Step 4: Under the ATM PVC CONFIGURATION, configure the following;
VPI: Enter the VPI provided by your Internet Service Provider (ISP)
VCI: Enter the VCI provided by your Internet Service Provider (ISP)
Step 5: Under the CONNECTION TYPE, select Bridging on the drop down menu for Protocol and
then select LLC/SNAP BRIDGI G on the drop down menu for Encapsulation Mode. Click Next to
continue.

Step 6: Click on Apply button to save the settings.