D-Link Covr User manual

Simple Setup Guide
Dual Band Whole Home Wi-Fi System
COVR-C1203
1
2
1
2
3
OR
x 3 x 2x 3
QIG
http://covr.local./
Wi-Fi
Wi-Fi
SSID:
Password:
D-Link Wi-Fi
Download the D-Link Wi-Fi app from the
App Store or Google Play.
Tap Install Your Device and follow the
on-screen instructions to complete the setup.
When the Covr LED is blinking amber,
connect your PC or laptop to the Wi-Fi name
(SSID) printed on the back of the device, or
on the included Wi-Fi Configuration Card.
Type http://covr.local./ into a web browser
and follow the on-screen instructions to
complete the setup.
Connect the power adapter and plug in
the Covr Point labeled A.
11
A
There are two easy ways to set up your Covr Wi-Fi System
D-Link Wi-Fi App Setup
Web Browser Setup

Having trouble installing your new product? D-Link’s website contains the latest user documentation
and software updates for D-Link products. You can also contact D-Link Technical Support through our
website, or phone number below.
United States
Internet: http://support.dlink.com
Phone: [phone]
Technical Support
Version 1.00(US)_216x280 | 2018/01/02
1
2
Press the button on the back firmly until the
cover plate pops off. Do not try to pry it off.
Place the replacement plate on the device,
aligning the guide pins on the plate with
the holes in the Covr Point.
Press down and then slide it towards the
button to lock it in place.
Place your Covr Points around your home to
extend your whole home Wi-Fi.
Check the LED indicator on your Covr Points
to ensure proper connection.
Cover Plate - You can change the cover plate to the color of your choice
Changing the Covr Plate
Covr Point Placement Guideline
Solid white: Strong signal.
Blinking orange: No signal. Move
your Covr Point closer to the Covr
Point labeled A until the LED turns
solid white.
Blinking white: Weak signal. Move
your Covr Point closer to the Covr
Point labeled A until the LED turns
solid white.