Dakota Micro AgCam User manual

User Manual DM-BLNM(CBLNF)
Author: SJE Revised by: SJE Revision Date: 06/10/22 Page 1 of 4
UserManual
AgCam®/EnduraCam®/RazerCam™ Camera to BNC DVR/Monitor Adapter
Cables
DM Part Number(s) Description(s)
DM-BLNM Balun that converts an Ethernet cable to a BNC
female connector on a DVR or Monitor
DM-CBLNF Balun that allows for a single
AgCam®/EnduraCam®/RazerCam™ camera to an
Ethernet cable
Always read the manual prior to operating this equipment. Also, please follow all safety signs and precautions.

User Manual DM-BLNM(CBLNF)
Author: SJE Revised by: SJE Revision Date: 06/10/22 Page 2 of 4
*Check the equipment’s user manual for the video capabilities (CVBS/AHD or NTSC/PAL) with the display
Cable Connectors
DM-BLNM
A. Balun (to RJ45)
B. Power Input
C. BNC Male
DM-CBLNF
A. 5-Pin Female Switchcraft Connector (to Camera)
B. Balun (to RJ45)
Cable Specifications
Description
Allows for the input of one (1) AgCam®/EnduraCam®/RazerCam™ camera into
a BNC DVR/Monitor.
Part Numbers
DM-BLNM & DM-CBLNF
Cable Length
14.5 Inches
Compatible Monitors
BNC DVR/Monitor
Compatible Cameras
AgCam®/EnduraCam®/RazerCam™
Monitor Inputs
1
Camera Inputs
1
CVBS or AHD Compatible*
CVBS or AHD
NTSC or PAL Compatible*
NTSC or PAL
Warranty Period
1 Year
A.
B.
C.
A.
B.

User Manual DM-BLNM(CBLNF)
Author: SJE Revised by: SJE Revision Date: 06/10/22 Page 3 of 4
Installation Instructions
DM-BLNM
1. Plug Part A of the DM-BLNM into the RJ45 connector on the
Ethernet Cable.
2. Plug Part B into the Power Source.
3. Plug Part C into the BNC Female on the DVR or monitor.
DM-CBLNF
1. Plug Part A of the DM-CBLNF into the Dakota Micro Camera.
2. Plug Part B into the other RJ45 Connector on the Ethernet Cable.

User Manual DM-BLNM(CBLNF)
Author: SJE Revised by: SJE Revision Date: 06/10/22 Page 4 of 4
Consumer Limited Warranty
Subject to the disclaimer, limitations and other directions stated hereafter, Dakota Micro, Inc. warrants that the
Product will be free from defects in material and workmanship for periods as stated hereafter from the date of
original purchase. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS. THE
EXCLUSIVE REMEDY OF THE BUYER IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT. EXCEPT AS
STATED IN THIS WARRANTY, DAKOTA MICRO, INC. SHALL NOT BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR
DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, RESULTING FROM THE
USE OR INABILITY TO USE THE PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY, NEGLIGENCE,
STRICT LIABILITY OF ANY OTHER LEGAL THEORY. Any oral statements or representations made by anyone which
are contrary to or at variance with the terms stated in this LIMITED WARRANTY are void.
Dakota Micro, Inc. will, at its option, either repair the defect or replace the defective Product or part thereof with
a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period of three (3)
years for AgCam® /EnduraCam® and InnoPro® cameras; two (2) years for AgCam®/ EnduraCam® monitors, and
Wireless components; Twelve (12) Months for all Overview® and RazerCam™Cameras & Monitors, cables and all
other accessories.
The Dakota Micro, Inc. limited warranty periods outlined above apply throughout the United States and Canada
only. A one (1) year maximum limited warranty for all Products applies to all other geographic locations unless
otherwise stated in writing by Dakota Micro, Inc.
This limited warranty does not apply to any issues connected with appearance that have no relation to the
performance of the Product nor to any Product the exterior of which has been damaged or defaced, which has
been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or
modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the process set forth in the
Product Warranty/Repair Process, and provide proof of purchase to Dakota Micro, Inc.
Neither the sales personnel of Dakota Micro, Inc. nor any dealer or any other person is authorized to make any
warranties other than those described herein, or to extend the duration of any warranties beyond the time
periods described herein.
The warranties described herein shall be the sole and exclusive warranties and remedies provided by Dakota
Micro, Inc. Correction of defects, in the manner and for the period of time described herein, shall constitute
complete fulfillment of all liabilities and responsibilities of Dakota Micro, Inc. to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims. In no event shall Dakota Micro, Inc. be liable or in any
way responsible for any damages or defects in the Product which were caused by repairs or attempted repairs
performed by anyone other than Dakota Micro, Inc.
Some states do not allow the limitation or exclusion of incidental or consequential damages, so said limitation
may not apply to you.
Any action at law, suit in equity, or other judicial proceeding for the enforcement of any right provided for herein
or otherwise, or with respect to any claim that a purchaser may have against Dakota Micro, Inc. shall be instituted
only in the Courts of the State of North Dakota, either in the state district court located in Wahpeton, North
Dakota or in Federal District Court located in Fargo, North Dakota. Without regard to conflicts of law principles,
the laws of the state of North Dakota shall govern the interpretation and enforcement of the terms of this
Limited Warranty and all aspects of the relationship between Dakota Micro, Inc., and the purchaser.
This warranty gives you specific legal rights and you may also have other rights, which may vary from state to
state.
8659 148½ Ave. SE.
Cayuga, ND 58013
www.dakotamicro.com
Home of CAN WE BREAK IT®
Management System Registered to ISO 9001