Dakwit TK300 User manual
GPS TRACKER USER
MANUAL
REFACE
Thank you for purchasing GPS tracker. This manual shows how to operate the device
smoothly in details, please make sure to read this manual carefully before using the
device. Please be noted that any update of the manual is made without prior notice.
Each time the update of the manual will be released in the latest product sales. The
manufacturer won’t assume any legal responsibility for any errors or omissions made in
this manual.
1.Hardware Description
1)red wire connect power positive+,
2)black wire connect power negative-,
3) Yellow wire connects to ACC (optional 4pin connector)
4) White wire connects to relay white wire (optional 4pin connector)
1.2) device face up the sky When install in car, if the windscreen glued by metal
thermal insulation layer or heating layer, it will reduce the GPS receive signal and
lead to GPS work disorder.
The GPS tracker must be installed by professional personnel
INDICATOR LIGHT STATUS
MEANING
green light -Solid
GSM signal connection
green light -Flash
NO GSM connection
Blue light -Solid
GPS signal connection
Blue light -Flash
No GPS or searching gps signal
Note: All leds will turn off after 10 minutes for best hide.if you call the device mobile
number,so the led will turn on work again. Connect 12V-36 v voltage of the power
supply
2. Notices:
1).GPS tracking can be worked outdoor. Must have mobile phone gsm
signal and have GPS signal, It can block GPS satellite signal when there
are metal or building above the GPS tracker etc.
2).Pls make sure 3G WCDMA card or 2G GSM network sim card, supports
making calls, sending messages, GPRS network.have money,Cancel the
PIN code
3.Quick using
1) Put the SIM card into device,take the device to outdoor
2) if option backup battery,insert sim card ,tracker auto power on. no
battery,connect external power9-36V
3) send text message "smslink123456" to sim card of gps tracker by your mobile
phone,then you can get a position information from gps tracker.
Or call sim card of gps tracker, you can get a position information from gps tracker
EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE
Pic（1）have gps signal Pic(2)no gps signal
Pic 1：Replied real-time tracking information under GPS satellites signal.
Lat:22.67533 lon:114.03913 Positioning of the latitude and longitude
values.
Speed：000.3 device moving speed. The unit is km/h.
T:06/14/17 09:14 Real-tracking time, the Default is London time. You can
Set a time zone by sms command
Google Link: Google map showing the position of the device.
Pic 2：Replied LBS information without GPS satellites signal.
smcc:27a4 1223: Real-time LBS data.
Time:08/00/00 LBS positioning time.
If you received positioning information as picture 2, please take gps tracker go t
o outdoor and Walking ,then you can receive the satellite signal.
4:Support Website tracking and APP tracking
4.1 Scan APP and Download APP
1)scan QR code---open with browser--- choose Android or
IPHONE---download-- installation app
2) Download iOS APP:login in app store---dagps---Install the dagps APP
PC login APP login
NOTE: If device online in platform, no need set apn commands
If you insert the correct SIM card and open GPRS, device in outdoor, still not
online.Please set the APN commands
we have two methods to find out apn content:ask simcard company or put sim card
into cell phone to find out APN
SMS1: APN123456+space+Apn name (for example tell you the apn name is
ABC,so send APN123456 ABC)
If have the APN user name and password, need plus APN user name and
password behind the APN name)
Eg:APN123456+space+APNname+space+APNuser name+space+ APNpassword
5. SMS Command instruction
NOTE:
1) Device default password:123456)
2)use of mobile phone APP or send message to the tracker about all set
command,note the space in the command
3)the default alarm way is SMS+platform
INSTRUCTION
Example
REPLY
gprs mode(default app tracking)
Gprs123456(default no need set)
Gprs ok
set APP online position(set apn)
APN123456 APN Name
(Apn name is SIM card access point)
Apn ok
Change to sms mode (sms tracking
sms123456(default no need set)
sms ok
sms position
Smslink123456
Get address
Parameter
Check123456
Parameter
INSTRUCTION
Example
REPLY
Set admin number(suppor 5pcs
admin
admin123456 mobile number
admin number receive alarm message
admin ok
Cancel admin number
noadmin123456 mobile number
noadmin ok
Set time zone
time zone123456 1(default no need set)
(1 is east 1, -1 is west 1)
Time zone ok
Set time zone(half time zone)
Time zone123456 8 30
(8 30 is east 8.5 time zone)
time zone ok
set move alarm
move123456 200 (200 is the meter)
move ok
Cancel move alarm
nomove123456
nomove ok
Cancel low battery alarm
Lowbattery123456 off
Low batter ok
Acc alarm(4pin connector )
acc123456
Acc ok
Cancel acc alarm(4pin connector )
Noacc123456
Noacc ok
Cut off oil or power(option relay
If the car is driving at high
speed or has no gps signal, it
will not implement
Cut123456
(it will control stop the car when the
speed is less than 20KM/H,this is safety
way to stop engine way
Stop engine
success
Cut off oil or power( Execute
immediately)
Stop123456(no matter car high speed,it
execute immediately,don’t proposal for
consider safety)
Stop engine
success
Resume cut off oil or power
resume123456
Resume engine
Set vibration alarm
shock123456
Shock ok
Cancel vibration alarm
Noshock123456
Noshock ok
real-time tracking (default 10s)
fix030s***n123456(default no need set)
every30seconds/1times positioning
Can change time interval
T n ok
6. FAQ and processing methods.
FAQ
Instructions/Solutions
Fail to turn it on
Please check if connect to power 9V-36V and red light if Solid
No GSM signal
Please check if SIM card installed correctly and have money,
if there a mobile phone GSM signal
Please check if SIM card is 3G or2G GSM network.
Please check if voltage of the power is normal
No GPS
A more open view of the sky is recommended to make sure the
receive the GPS signal normally.in outdoor and take device to walk
No reply to SMS
command
Password wrong or the format is wrong. restore factory settings
send messages begin123456
No reply to calling &
No alarm message
Authorized / admin phone number is incorrect or has not set up
SMS position OK,
cannot APP position
Pls check if APN is correctly set. And set the correct APN
Platform position is
difference and the
actual position.
position time don't update or no GPS signal: call the device phone
number and receive the position message. If it shows like Pic 2, pls
make sure the device can receive the GPS signal normally.in
outdoor,and take device to walk around, make sure sim normal
Platform login failed
Pls Confirm if the number is correct,point the IMEI number to log in
IMEI number on the back of device,it is correct,Provide IMEI
number to add by factory
Gps installed
Gps installed at good signal place of car, need professional
installation
7.If you want use the device on other platform, please send customer service
an email with new IP and port. And then send message to SIM card with
below format (No need to set by default)
SMS1: adminip123456+space+IP+space+port(No need to set by default)
Eg: Adminip123456 103.110.152.62 7018
or SMS1: adminip123456+space+DNS+port(No need to set by default)
Eg:adminip123456 www.gps110.org 7018
Table of contents
Other Dakwit GPS manuals
