Dakwit TK800 User manual

1
GSM/GPRS/GPS TRACKER
MANUAL
TK800
Preface
Thank you for purchasing the tracker. This manual shows how to operate the
device smoothly and correctly. Make sure to read this manual carefully before
using this product. Please note that specification and information are subject to
changes without prior notice in this manual. Any change will be integrated in

2
the latest release. The manufacturer assumes no responsibility for any errors
or omissions in this document.
1. Summary
Working Based on existing GSM/GPRS network and GPS satellites, this
product can locate and monitor any remote targets by SMS or internet.
Deaoke TK800 Specifications
Content
Specs
Dim.
93mm x 77mm x 27mm
Weight
227g
Network
GSM/GPRS
Band
850/900/1800/1900Mhz
GSM chip
MT6261
GPS chip
Ublox 7020
GPS sensitivity
-159dBm
GPS accuracy
5m
Time To First Fix
Cold status 45s /Warm status 35s /Hot status 1s
Battery
Chargeable 3.7V 6600mah Li-ion Battery
Work voltage
5V
Storage Temp.
-40°C to +85°C
Operation Temp.
-20°C to +55°C
Humidity
5%--95% non-condensing

3
2.Main functions
·GSM quad-band frequency;
·Real time tracking by SMS/GPRS
·low power alarm
·Movement alarm
·Into/out off Geo-fence alarm
·Add Vibration alarm
·Add Monitor
·Add Super-long standby 3 yeas (24-hour cycle positioning）
·Add strong magnet(free installation)
·Add Anti-jammer and Anti-detection function
·Add Anti-Disassemble and anti-Fall off alarm
·Add clock mode /fixed time positioning/smart cycle position
·add waterproof and dust proof
·add save power and GPRS
·Add AGPS function,receive GPS signals faster
·Add built-in storage memory
·Add app GPRS set
3.Led indicator status
LED INDICATOR STATUS
MEANING
Green LED Flashing
Searching GSM signal
Green LED continuously lit
GSM signal OK
Blue LED continuously Flashing per 3s
every
Searching gps signal
Blue LED continuously lit
gps signal ok
3.1 Notices:
1).GPS tracking can be worked outdoor. Must have mobile phone gsm signal
and have GPS signal, It can block GPS satellite signal when there are metal
or building above the GPS tracker

4
2).Pls make sure GSM 2g SIM card or compatibility 2G GSM network sim card,
supports making calls, sending messages, GPRS network.have money,Cancel
the PIN code
4.Quick using
Use mobile phone call the device and hang up
or sending message “smslink123456” to sim card in tracker ,then send
message “time zone123456 time”tracker reply positioning information

5
Picture (1) have gps signal Picture (2) no gps signal
Pic(1)：Replied real-time tracking information
Lat:22.67533 lon:114.03913 Positioning of the latitude and longitude values.
T:06/14/17 09:14 real-tracking time, the Default is London time. You can set a
time zone
Google Link: This is the link to the Google map showing the position of the
device.
◆Pic( 2)：Replied last time position information. Now is LBS position
If you receive positioning information is picture 2, please go out the outdoor
and Walk around with gps tracker,for receive The satellite signal
5:Support Website tracking or APP tracking check
If you need real-time tracking by APP ,please scan APP or Download “dagps”
5.1 Scan APP or Download APP
1)scan QR code---open with browser--- choose Android or
Iphone---Download-- installation app

6
2) Download ios APP:login in app store---dagps---Install the dagps APP
5.2: login platform positioning
1)Open www.gps110.org
Use tracker ID login, default password 123456.

7
PC login APP login
5.3 registerAdministrator account and tracking multiple devices
operation ：register APP accounts--- Fill in the APP---login in registered accounts
vehicle list----add device---fill in ID--OK
Registration fill in

8
Click vehicle list add device
If you add device more than two , continue to add ID number
If device online in platform, no need set apn commands
6.1 Set APN
SMS1: APN123456+space+Apn name
( APN name pls ask the sim card company ,for example tell you the apn name
is ABC,so send :APN123456 ABC)
(If have the APN user name and password, need plus APN user name and
password behind the APN name)
Eg: APN123456+space+APN name+space+ APN user name+space+
APNpassword
It is Real time positioning,every 3min upload position by default,you can
change upload time interval
6.2. If use the other platform, start on line tracker
in advance Using mobile phone send SMS commands to device and set online

9
platform (please set DNS and port,set apn)
(Use the default platform, don't need to operate 6.2)
7) Working mode
【Mode 1】：real-time tracking (default)
every 3mins/1 times,can work 10 days,can’t anti-jammer and anti detection
【Mode 2】：24 hours cycle mode
every 24 hours/1 times positioning,can work 3 years
【Mode 2】：clock mode(can set up 2-6 times positioning per day )
every 24 hours/2-6 times positioning,can work from 6 months to 18 months
【Mode 4】: smart cycle positioning(10mins)
every 10 mins/1 times, device upload position , then device turn off
Until the next cycle positioning again
Positioning time interval can be changed, time is ≥10mins
【Mode 5】: smart turn on/off mode (deep sleep save power mode)
(static turn off save power, vibration or falls off alarm start work)
8.Set Command by APP or SMS
NOTE:
1) Device default password:123456)
2)use of mobile phones send messages to the tracker about all set command
3)After admin number setting, all alarm message will send authorization number
other cell-phone number send command will not reply
4)If you want standby time longer, pls don't open move alarm, and real-time
location tracking.etc

10
5)Charging for 24 hours for the first time, device light not on
NAME
COMMAND
•EXAMPLE
Set apn
apn123456 apn Name
apn123456 cmnet
apn123456 apn name user password
Apn123456 cmnet cmwap 66666
Set IP /DNS
port
adminip123456 IP port
Adminip123456 110.92.64.21 7018
Adminip123456 DNS port
Adminip123456 www.gps110.org
7018