DANAGE DOMINO Target stand A/2014 •Assembly instructions
DANAGE
of
Scan
dinavia
ApS
•
Industrivej
13
•
6310
B
roag
er
•
E-mail:
[email protected] /
danage
@danage.dk
Tlf.: +45 74 44 26 36 • CVR: 14362975 • Hjemmeside: www.domino-target.com • © copyright all rights reserved
3
The target stand is turned back
side up, and cross batten D and
E is fastened as shown in the
image. One can choose between
2 positions for cross batten D.
4
The target stand is
raised to a slightly
unfolded standing
position, as shown.
Side batten F is
fastened with a screw.
5
5. The wing screw is fastened in one of the 3
holes and the side batten is turned down and
fastened to the back leg. The 3 holes gives the
target stand different angles. The innermost
hole (appr. 3oangle) is great for short distance
shooting, the middle hole (appr. 8oangle) is
great for medium distances, such as 30-50 m,
while the last hole (appr. 13oangle) is great for
distances beyond 50 m.
For transport/storage, when the target stand is
folded, the side batten is fastened to the front
leg only, using the wing screw in the middle
D
E
F
