DAQ system PCI-DIO64 Series User manual

PCI-DIO64xx
PCI-DIO6400 I/O Board
PCI-DIO6401 Input Board
PCI-DIO6402 Output Board
cPCI-DIO6400 I/O Board
User Manual
Version 1.0
ⓒ2005 DAQ SYSTEM Co., Ltd. All rights reserved.
Microsoft®is a registered trademark; Windows®, Windows NT®, Windows XP®, Windows 7®, Windows 8®, Windows 10®
All other trademarks or intellectual property mentioned herein belongs to their respective owners.
Information furnished by DAQ SYSTEM is believed to be accurate and reliable, However, no responsibility is assumed by DAQ SYSTEM for its use, nor
for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under
any patent or copyrights of DAQ SYSTEM.
The information in this document is subject to change without notice and no part of this document may be copied or reproduced without the prior
written consent.

PCI-DIO01 User’s Manual
1
Contents
1. Introduction -------------------------------------------------------------------------- 3
1-1 Product Features ------------------------------------------------------------------------ 4
2. PCI-DIO64xx Series Configuration ---------------------------------------------- 6
3. PCI-DIO64xx Series Connector Pin Map
3-1 PCI-DIO6400 ----------------------------------------------------------------------- 10
3-2 PCI-DIO6401 ----------------------------------------------------------------------- 14
3-3 PCI-DIO6402 ----------------------------------------------------------------------- 18
3-4 cPCI-DIO6400 --------------------------------------------------------------------- 22
3-4-1 Rear Transition Board Panel ---------------------------------------------------------- 23
3-4-2 Rear Transition Board (J2) ---------------------------------------------------------- 24
3-4-3 Rear Transition Board (JP1) ---------------------------------------------------------- 26
3-4-5 Rear Transition Board (JP2) ---------------------------------------------------------- 28
4. Digital Input
4-1 PCI-DIO6400, cPCI-DIO6400, PCI-DIO6401 Input Wiring -------------------------------- 30
4-2 PCI-DIO6400, cPCI-DIO6400 Input Circuit ---------------------------------------------- 32
4-3 PCI-DIO6401 Input Circuit ----------------------------------------------------------------- 33
5. Digital Output
5-1 PCI-DIO6400, cPCI-DIO6400, PCI-DIO6401 External Wiring ----------------------------- 35
5-2 PCI-DIO6400, cPCI-DIO6400 Output Circuit ---------------------------------------------- 38
5-3 PCI-DIO6402 Output Circuit --------------------------------------------------------------- 39

PCI-DIO01 User’s Manual
2
6. Option Setup -------------------------------------------------------------- 40
6-1 J2 Jumper Setup -------------------------------------------------------------- 42
6-2 JP1 Jumper Setup -------------------------------------------------------------------- 42
6-3 Board Address Setup -------------------------------------------------------------------- 43
7. Installation
7-1 Hardware Installation ------------------------------------------------------------------- 44
7-1-1 Product Contents ------------------------------------------------------------------ 44
7-1-2 Installation Process -------------------------------------------------------------------- 44
7-2 Driver Installation ------------------------------------------------------------------- 45
8. Sample Program
8-1 Program Interface --------------------------------------------------------------------- 49
8-2 Function Description --------------------------------------------------------------------- 50
Appendix
A-1 Repair Regulations ---------------------------------------------------------------------- 52
Reference ----------------------------------------------------------------------- 53

PCI-DIO01 User’s Manual
3
1. Introduction
The PCI-DIO6400 series board is a 32/64 bit digital input/output board that is perfectly compatible
with industrial PCs and uses a 33bits, 33MHz PCI interface. All control of this board is designed with
FPGA (Field Programmable Gate Array), so function enhancement or modification is free, and it can
be easily upgraded according to the user's needs.
MODELS SUMMARY
[Table 1. DAQ PCI-64xx Series Models]
Model
Connecter
Digital I/O
PCI-DIO6400
▪Input Connector : Box-shaped Ribbon cable
(Hirose HIF3F-40PA-2.54DS)
▪Output Connector : Dsub-37pin female Type
32/32
PCI-DIO6401
▪Input Connector : Box-shaped Ribbon cable
(Hirose HIF3F-40PA-2.54DS), Dsub-37pin Female Type
64/None
PCI-DIO6402
▪Output Connector : 40 Pin Box-Header
(Hirose HIF3F-40PA-2.54DS), Dsub-37pin Female Type
None/64
cPCI-DIO6400
▪Front Panel : Indication LED
▪I/O Connector : Compact PCI Female(Emi 064785) Type
▪External panel Connector : Dsub-37pin female Type
32/32

PCI-DIO01 User’s Manual
4
1-1 Product Features
Items
Description
Remark
Hardware
PC Interface
PCI 32bit/33Mhz
Operation Power
+5VDC/ Max 1A
I/O Port
D-Sub37
Boards
cPCI-DIO6400
PCI-DIO6400
PCI-DIO6401
PCI-DIO6402
32/32bit Digital I/O
32/32bit Digital I/O
64bit Digital Input
64bit Digital Output
Isolated Digital Input
Maximum Input Range(Non-polarity) : 24V
Digital Logic Levels : Input High level 5 ~24V
Input Low voltage 0 ~ 1.5V
Input Resistance : [email protected]
Isolation Voltage : 5000Vrms
Isolated input voltage up to 24V
Interrupt Sources : All Digital Inputs
Data Transfer : Programmed I/O
Isolated Digital Output
Output type : Open collector Darlington transistor
Sink Current : 25mA for one channel @ 100% duty
500mA for all channels @ 20% duty
Power dissipation : Max 2.36W per chip (8DO channels)
Supply Voltage : 5V PCI or Isolated 5V(inside equipped)
Isolation Voltage : 5000Vrms
Data Transfer : Programmed I/O
Simultaneous use of
boards
Max. 4
Operating temperature
range
0 ~ 60℃
Storage temperature
range
-20 ~ 80℃
Humidity range
5 ~ 95%
Non-condensing
Board size
160mm X 100mm
PCB Board Size
Software
OS
Windows 2000/XP/7/8/10 (32/64bit)
API
Windows Client DLL API
Support
Sample Program
VC++

PCI-DIO01 User’s Manual
5
DAQ System Digital I/O Products
Product
No. In/Out
Timer/Counter
Specification
cPCI-DIO6400
32/32
Isolated Input/Output
cPCI-DIO02
128 channels Software
Configurable
Read/Write in 8 Groups in 16-bit Units
PCI(e)-DIO6400
32/32
Isolated Input/Output
PCI-DIO6401
64/None
Isolated Input
PCI-DIO6402
None/64
Isolated Output
PCI-DIO01
32/32 Software
Configurable
1/1
TTL Level Input/Output
32bit Counter/Timer
PCI-DIO02
128 channels Software
Configurable
1/1
Read/Write in 8 Groups in 16-bit Units
PCI-DIO12
16/16 or 32/32
Software Configurable
128Mbyte DDR SDRAM
Data transfer rate up to 400Mb/s
PCI-MOT01
24/24 (Isolated)
1 Channel PWM, 2 Channel Encoder,
1 Channel ADC
PCI-PWM02
6/12(Isolated)
4 Channel Triggered PWM outputs
PCI(e)-TC03
16/16
8/8
32bit resolution Differential
Counter/Timer
PCI-EK01
24(shared)
1/1(32bit)
12bit 8 Channel A/D Input
12bit 8 Channel D/A Output
PCIe-DIO05
32/32
TTL Level Input/Output
USB-AIO10
24/24(Isolated)
4-Ch Analog Input and Output
RS-232 115,200bps Interface
USB-DIO12800
128 channels Software
Configurable
Read/Write in 8 Groups in 16-bit Units
USB-DIO6400
32/32
Isolated Input/Output
12Mbps
USB-MULTI
2/None
Isolated Input/Output
16bit Counter In & Timer Out
USB-PWM10
6/8(Isolated)
4 Channel Triggered PWM outputs

PCI-DIO01 User’s Manual
6
2. PCI-DIOxx Series Configuration
This chapter provides detailed description of PCI-DIO64xx (PCI-DIO6400, PCI-DIO6401, PCI-DIO6402
with cPCI-DIO6400) series boards. It processes digital data of 32/32 bit In/Out, 64 bit In, and 64 bit
Out according to each board and uses PCI and Compact PCI interfaces.
PCI-64xx series boards use a high reliability photo coupler to increase the reliability and execution
of signals with isolated lines, and do not require an external circuit for initial state and a separate
mechanism for interrupt. Since the main interface is designed with FPGA, it is free to enhance or
modify functions, and it can be easily upgraded according to the user's needs.
PCI Target
PCI BUS
Local Bus
Address
Data(Mem,I/O)
DIO
32bit Input
External
Interface
IO Decoder
To each IO
Module
PCI-DIO64xx Series INTERNAL BLOCK
MEM Decoder
BUS Mux
DIO
32bit Output
DIN
64bit Input
DOut
64bit Output
PCI-DIO6400, cPCI-DIO6400
PCI-DIO6402
PCI-DIO6401
[Figure 2-1. PCI-DIO64xx Series Block Diagram]

PCI-DIO01 User’s Manual
7
In the case of PCI-DIO6400 and cPCI-DIO6400, as shown in [Figure 2-2], it has 32 isolated
digital input ports and 32 digital output ports to interface with the outside.
[Figure 2-2. PCI-DIO6400 & cPCI-DIO6400 Internal Block Diagram]

PCI-DIO01 User’s Manual
8
PCI-DIO6401 has 64 isolated digital input ports as shown in [Figure 2-3] and is configured to
interface with the outside.
[Figure 2-3. PCI-DIO6401 Internal Block Diagram]

PCI-DIO01 User’s Manual
9
In the case of PCI-DIO6402, as shown in [Figure 2-4], it has 64 isolated digital output ports and
is configured to interface with the outside.
[Figure 2-4. PCI-DIO6402 Internal Block Diagram]