Darfon RF11-GP-K User manual

Multimedia Keyboard
User Manual
Darfon Electronics Corp.
6, Feng-Shu Tsuen Gueishan,
Taoyuan 333, Taiwan, R.O.C.
Tel: [phone]
Fax:[phone]
http://www.darfon.com.tw
RF Cordless Keyboard
Model No:RF11-GP-K, RF12-GP-K
RF11-GP-R

Wireless Multimedia Keyboard User Guide
System Requirement
nWin 98, Win 2000,ME or Win XP Operating System
nIBM PC or compatible
nPS2 Interface
nCD-ROM or DVD-ROM drive
n16MB of RAM
n10MB available hard-drive space

Wireless Multimedia Keyboard
n27MHz RF (Radio Frequency) keyboard
n3m Operation Range
nOne touch access to multimedia application
nInstant access to Internet and E-mail
nProgrammable Hot keys could be customized to launch any program and application
Installation
nAssure the receiver has been installed well.
Connect the receiver to your PC by plugging in the receiver’s green connector into the mouse port
of your PC and also plugging in the receiver’s purple connector into the keyboard port of your PC.
nLoad batteries..
nInstall Keyboard
1. Press the button infront of the receiver, then press and button on the right of keyboard
2. If the keyboard could not work, please repeat item 1 again.
nInsert Magic Keyboard Driver CD into CD-ROM or DVD drive.
nDouble click “setup.exe”
nThe onscreen setup will guide you through the rest of process.
nAfter the software installation is completed, you will be promoted to restart your computer.
nIf you already have a version of Magic Keyboard on your system, the older version must be
uninstalled first before installing the new version.
First Use / RF Connection
1. Turn off the power of your computer.
2. Remove the existing keyboard and mouse connector
3. Plug the RF receiver connectors into corresponding ports of your computer
4. Install AA and AAA batteries into the keyboard and mouse
5. Press the button infront of the receiver , then press the button on the right of keyboard.
6. Press the button infront of the receiver , then press the button on the back of mouse.
Please right click your Magic Keyboard icon on system tray and chose Help to find more function instruction.
If you have any questions, please contact us through our web site at http://www.darfon.com.tw

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by on or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experiencedradio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2)this device must accept any
interference received, including interference that may cause undesired operation.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void
the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator and your body.