DARK IJ LAMP METAL TABLE User manual

© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on www.dark.be.
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
[phone] / [email protected] / www.dark.be
ASSEMBLY DOCTOR Ij-LaMp MeTaL TaBlE design Jacob de Baan for dark
V—22/08/22
1Connect the plug
2Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light xture. This will reduce nger-
prints and scratches.
!!! Never connect the xture on 220-240V ac without driver.
Lighting xture is constant current driven.
For drivers purchase, contact your sales contact.
Always connect constant current leds in serial connection.
Check catalogue P 488-489 (Installation of LED)
LIGHT SOURCE
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualied person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V IP20 850 °C
0.3m
V0 19/08/2016
kg
1
260
311239
1
2
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V IP20 850 °C
0.3m
V0 19/08/2016
kg
1
260
311239
1
2
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V IP20 850 °C
0.3m
V0 19/08/2016
kg
1
260
311239
1
2
Alu-Metal-Brass 230 V IP20850°

Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL WALL
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
260 mm
340 mm
230 V IP20 850°C
0.3m
V2 19/08/2016
1. Mount the bracket with 2 screws onto the wall.
2. Connect the power supply.
3. Adjust the fixture and close the wall base.
4. Put the lampholder through the lampshade.
5. Put the other lampshade on the lampholder.
6. Fasten with the ring on the lampsocket.
7. Place the lamp. Respect the wattage.
* Please use gloves enclosed for handling and installation of light fixture.
This will reduce fingerprints and scratches.
1
2
2
3
3
4
5
6
7
1
kg
1
CONNECTION Standard version
Green/Yellow
Brown (L)
Blue (N)
Green/yellow (ground)
© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on www.dark.be.
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
[phone] / [email protected] / www.dark.be
ASSEMBLY DOCTOR Ij-LaMp MeTaL WaLl design Jacob de Baan for dark
V—22/08/22
1Mount the bracket with 2 screws onto the wall.
2Connect the power supply
* Please use gloves for handling and installation of light xture. This will reduce
ngerprints and scratches.
3Adjust the xture and close the wall base.
4Put the lampholder through the lampshade.
5Put the other lampshade on the lampholder.
6Fasten with the ring on the lampsocket.
7Place the lamp. Respect the wattage.
!!! Never connect the xture on 220-240V ac without driver.
Lighting xture is constant current driven.
For drivers purchase, contact your sales contact.
Always connect constant current leds in serial connection.
Check catalogue P 488-489 (Installation of LED)
LIGHT SOURCE
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualied person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V IP20 850 °C
0.3m
V0 19/08/2016
kg
1
260
311239
1
2
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V IP20 850 °C
0.3m
V0 19/08/2016
kg
1
260
311239
1
2
Alu-Metal-Brass 230 V IP20850°

Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Put the lamholder through the lampshade.
2. Put the other lampshade on the lampholder.
3. Fasten with the ring on the lampsocket.
4. Place the lamp. Respect the wattage.
5. Mount the ceiling bracket with 2 screws onto the ceiling.
6. Adjust the fixture to the preferred height
and fasten the strainrelief.
7. Connect the power supply and close the ceiling base.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
260 mm
340 mm
230 V IP20 850 °C
0.3m
V2 19/08/2016
standard 1500mm 1
2
3
4
56
7
56
7
101
kg
1
CONNECTION Standard version
Green/Yellow
Brown (L)
Blue (N)
Green/yellow (ground)
© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on www.dark.be.
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
[phone] / [email protected] / www.dark.be
ASSEMBLY DOCTOR ij-lamp metal design Jacob de Baan for dark
V—22/08/22
1Put the lampholder through the lampshade.
2Put the other lampshade on the lampholder.
* Please use gloves for handling and installation of light xture. This will reduce
ngerprints and scratches.
3Fasten with the ring on the lampsocket.
4Place the lamp. Respect the wattage.
5Mount the ceiling bracket with 2 screws onto the ceiling.
6Adjust the xture to the preferred height and fasten the strainrelief.
7Connect the power supply and close the ceiling base.
!!! Never connect the xture on 220-240V ac without driver.
Lighting xture is constant current driven.
For drivers purchase, contact your sales contact.
Always connect constant current leds in serial connection.
Check catalogue P 488-489 (Installation of LED)
LIGHT SOURCE
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualied person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V IP20 850 °C
0.3m
V0 19/08/2016
kg
1
260
311239
1
2
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V IP20 850 °C
0.3m
V0 19/08/2016
kg
1
260
311239
1
2
Alu-Metal-Brass 230 V IP20850°

© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on www.dark.be.
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
[phone] / [email protected] / www.dark.be
ASSEMBLY DOCTOR Ij-LaMp TaBlE design Jacob de Baan for dark
V—22/08/22
1Connect the plug.
2Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light xture.
This will reduce ngerprints and scratches.
!!! Never connect the xture on 220-240V ac without driver.
Lighting xture is constant current driven.
For drivers purchase, contact your sales contact.
Always connect constant current leds in serial connection.
Check catalogue P 488-489 (Installation of LED)
LIGHT SOURCE
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualied person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
Alu-Metal-Brass 230 V IP20850°

Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP WALL
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
101
LED E27
Watt
8
max
TCA-SE
Watt
8
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
260 mm
340 mm
WHITE - WHITE WHITE -COLOR - WHITE BLACK - WHITE
1
230 V IP20 850°C
0.3m
V4 19/08/2016
1. Mount the bracket with 2 screws onto the wall.
2. Connect the power supply.
3. Adjust the fixture and close the wall base.
4. Put the lampholder through the lampshade.
5A. Put the spacer rings on the lampholder.
5B. Put the colorfilter of your choice and filterholders over the lampholder.
6. Put the other lampshade on the lampholder.
7. Fasten with the ring on the lampsocket.
8. Place the lamp. Respect the wattage.
2
3
4
5A 5B
6
7
8
kg
1
CONNECTION Standard version
Green/Yellow
Brown (L)
Blue (N)
Green/yellow (ground)
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP WALL
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
101
LED E27
Watt
8
max
TCA-SE
Watt
8
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
260 mm
340 mm
WHITE - WHITE WHITE -COLOR - WHITE BLACK - WHITE
1
230 V IP20 850°C
0.3m
V4 19/08/2016
1. Mount the bracket with 2 screws onto the wall.
2. Connect the power supply.
3. Adjust the fixture and close the wall base.
4. Put the lampholder through the lampshade.
5A. Put the spacer rings on the lampholder.
5B. Put the colorfilter of your choice and filterholders over the lampholder.
6. Put the other lampshade on the lampholder.
7. Fasten with the ring on the lampsocket.
8. Place the lamp. Respect the wattage.
2
3
4
5A 5B
6
7
8
kg
1
CONNECTION Standard version
Green/Yellow
Brown (L)
Blue (N)
Green/yellow (ground)
© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on www.dark.be.
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
[phone] / [email protected] / www.dark.be
ASSEMBLY DOCTOR Ij-LaMp WaLl design Jacob de Baan for dark
V—22/08/22
1Mount the bracket with 2 screws onto the wall.
2Connect the power supply.
* Please use gloves for handling and installation of light xture. This will reduce
ngerprints and scratches.
3Adjust the xture and close the wall base.
4Put the lampholder through the lampshade.
5A. Put the spacer rings on the lampholder
B. Put the colorlter of your choice and lterholders over the lampholder.
6Put the other lampsahde on the lampholder.
7Fasten with the ring on the lampsocket.
8Place the lamp. Respect the wattage.
!!! Never connect the xture on 220-240V ac without driver.
Lighting xture is constant current driven.
For drivers purchase, contact your sales contact.
Always connect constant current leds in serial connection.
Check catalogue P 488-489 (Installation of LED)
LIGHT SOURCE
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualied person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V IP20 850 °C
0.3m
V0 19/08/2016
kg
1
260
311239
1
2
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V IP20 850 °C
0.3m
V0 19/08/2016
kg
1
260
311239
1
2
Alu-Metal-Brass 230 V IP20850°

Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
8
max
TCA-SE
Watt
8
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Put the lamholder through the lampshade.
2a. Put the spacer rings on the lamholder.
2b. Put the colorfilter of your choice
and filterholders over the lampholder.
3. Put the other lampshade on the lampholder.
4. Fasten with the ring on the lampsocket.
5. Place the lamp. Respect the wattage.
6. Mount the ceiling bracket with 2 screws onto the ceiling.
7. Adjust the fixture to the preferred height
and fasten the strainrelief.
8. Connect the power supply and close the ceiling base.
260 mm
340 mm
WHITE - WHITE WHITE -COLOR - WHITE
BLACK - WHITE
1
2A 2B
3
4
5
230 V IP20 850 °C
0.3m
V3 19/08/2016
6
7
8
CONNECTION Standard version
Green/Yellow
Brown (L)
Blue (N)
Green/yellow (ground)
kg
1
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
8
max
TCA-SE
Watt
8
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Put the lamholder through the lampshade.
2a. Put the spacer rings on the lamholder.
2b. Put the colorfilter of your choice
and filterholders over the lampholder.
3. Put the other lampshade on the lampholder.
4. Fasten with the ring on the lampsocket.
5. Place the lamp. Respect the wattage.
6. Mount the ceiling bracket with 2 screws onto the ceiling.
7. Adjust the fixture to the preferred height
and fasten the strainrelief.
8. Connect the power supply and close the ceiling base.
260 mm
340 mm
WHITE - WHITE WHITE -COLOR - WHITE
BLACK - WHITE
1
2A 2B
3
4
5
230 V IP20 850 °C
0.3m
V3 19/08/2016
6
7
8
CONNECTION Standard version
Green/Yellow
Brown (L)
Blue (N)
Green/yellow (ground)
kg
1
© DARK 2021 DARK has the right to change any technical data, dimensions,
colors and characteristics without prior notice. All rights reserved.
Please always check the latest technical data sheet on www.dark.be.
DARK at night nv
Vliegplein 43 / 9991 Maldegem / Belgium
[phone] / [email protected] / www.dark.be
ASSEMBLY DOCTOR ij-lamp design Jacob de Baan for dark
V—22/08/22
1Put the lampholder through the lampshade.
2A. Put the spacer rings on the lampholder
B. Put the colorlter of your choice and lterholder over the
lampholder.
* Please use gloves for handling and installation of light xture. This
will reduce ngerprints and scratches.
3Put the other lampshade on the lampholder.
4Fasten with the ring on the lampsocket.
5Place the lamp. Respect the wattage.
6Mount the ceiling bracket with 2 screws onto the ceiling.
7Adjust the xture to the preferred height and fasten
the strainrelief.
8Connect the power supply and close the ceiling
base.
!!! Never connect the xture on 220-240V ac without driver.
Lighting xture is constant current driven.
For drivers purchase, contact your sales contact.
Always connect constant current leds in serial connection.
Check catalogue P 488-489 (Installation of LED)
LIGHT SOURCE
Touching the LED can result in permanent damage of the light source.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualied person.
Always be properly grounded when touching leads or circuitry inside the luminaire.
Design by Jacob de Baan for DARK
Assembly doctor for IJ-LAMP METAL TABLE
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel [phone]
+32(0)50/71.81.38
[e-mail]
www.dark.be
DARK
fax
mail
LED E27
Watt
12
max
TCA-SE
Watt
11
max
E27
NOT SUITABLE FOR HALOGEN
OR INCANDESCENT BULBS.
Lamp possibilities :
1. Connect the plug
2. Place the lamp. Respect the wattage.
* Please use gloves for handling and installation of light fixture.
This will reduce fingerprints and scratches.
230 V IP20 850 °C
0.3m
V0 19/08/2016
kg
1
260
311239
1
2
Alu-Metal-Brass 230 V IP20850°

- Het toestel dient geplaatst, aangesloten en uitgetest te worden door een
erkend installateur en volgens de plaatselijk geldende reglementering.
- De klant wordt verondersteld onze algemene verkoopsvoorwaarden te kennen.
- De lampen dienen steeds met zorg te worden ge nstalleerd of vervangen.
- Overschrijdt nooit de maximum aangeduide wattage op het toestel.
- Voor installatie of onderhoud van het toestel de voedingsspanning afsluiten.
- Bij lampvervanging het toestel afzetten en volledig laten afkoelen.
- Het toestel kan worden onderhouden met een zachte doek en eventueel een
standaard pH-neutraal detergent. Voor goederen met een inox oppervlak moet
dit op geregelde tijdstippen gebeuren. Het toestel moet hiervoor worden
afgezet en volledig afgekoeld.
- Elk verkeerd gebruik of aanpassing van het toestel maakt de garantie nietig.
Kinderen moeten buiten het bereik van de toestellen worden gehouden,
aangezien de temperatuur van het toesteloppervlak hoog kan oplopen.
- De toestellen mogen nooit worden bedekt zoals bijvoorbeeld met een isolerend
materiaal of iets dergelijks.
ER KUNNEN WIJZIGINGEN OPTREDEN QUA ONTWERP,
SPECIFICATIES EN MONTAGE-INSTRUCTIES.
- Das Gerät soll von einem anerkannten Installateur und den örtlich geltenden
Satzungen gemäß aufgestellt, angeschlossen und getestet werden.
- Der Kunde soll unsere allgemeinen Verkaufsbedingungen kennen.
- Die Lampen sollen immer sorgfältig installiert oder ersetzt werden.
- Sie sollen die angegebene maximale Wattleistung, die auf dem Gerät angegeben ist,
nie überschreiten.
- Für die Installation oder die Wartung des Geräts sollen Sie die Spannung abschließen.
- Wenn Sie Lampen ersetzen, sollen Sie das Gerät ausschalten und völlig abkühlen lassen.
- Für die Wartung des Geräts benutzen Sie ein weiches Tuch und eventuell ein
 regulärespH-neutralesReinigungsmittel.FürGütermiteinerOberächeaus 
Edelstahl soll dies regelmäßig gemacht werden. Dafür soll das Gerät ausgeschaltet und
völlig abgekühlt werden.
- Jede falsche Benutzung oder Anpassung des Geräts macht die Garantie ungültig.
- Diese Geräte sollen außer Reichweite von Kindern gehalten werden, da die Temperatur
 derOberächedesGerätsstarkansteigenkann.
- Die Geräte dürfen nie mit zum Beispiel einem isolierendem Material oder etwas
Ähnlichem bedeckt werden.
ÄNDERUNGEN IM ENTWURF, IN SPEZIFIZIERUNGEN UND
MONTAGEANWEISUNGEN SIND MÖGLICH.
- L’appareil doit être placé, raccordé et testé par un installateur agréé et selon les
réglementations locales en vigueur.
- Le client est censé connaître nos conditions générales de vente.
- Les lampes doivent en tout temps être installées ou remplacées avec soin.
- Ne jamais excéder le wattage maximum indiqué sur l’appareil.
- Déconnecter la tension d’alimentation de l’appareil avant installation ou entretien.
- Déconnecter l’appareil et le laisser refroidir enti rement avant de remplacer
une lampe.
- L’appareil s’entretient à l’aide d’un chiffon doux et, éventuellement, d’un
détergent au PH neutre. Pour les appareils à surface en inox, cet entretien doit
s’effectuer à des intervalles réguliers. A cet effet, déconnecter l’appareil et le
laisser refroidir entièrement.
- Toute utilisation erronée ou adaptation de l’appareil annule la garantie.
- Ne pas laisser les appareils à portée de main des enfants, étant donné que la
température de la surface de l’appareil peut être élevée.
- Les appareils ne peuvent jamais être recouverts, comme par exemple d’un
matériau isolant ou équivalent.
NOUS NOUS RÉSERVONS LE DROIT DE MODIFICATIONS AU NIVEAU
CONCEPT, SPÉCIFICATIONS ET INSTRUCTIONS DE MONTAGE.
- Theapplianceshouldbeinstalled,connectedandtestedbyacertiedinstaller,
and in accordance with the local regulations.
- The customer is supposed to know our general sales conditions.
- Lamps should always be installed or replaced with care.
- Never use a wattage higher than the maximum wattage mentioned on the appliance.
- Turn off the power supply before installation or maintenance of the appliance.
- Whenalampistobereplaced:switchofftheappliancerstandletitcooldown 
completely.
- Clean the appliance with a soft cloth and a standard pH neutral detergent.
Stainless steel surfaces should be maintained regularly. Therefore the appliance
should be switched off and cooled down.
- Misuse of, or changes to the appliance shall nullify the guarantee.
- Keep children away from the appliances; the appliance’s surface can be very hot.
- Never cover the appliances with e.g. insulating material.
THE MANUFACTURER IS FREE TO CHANGE THE DESIGN,
SPECIFICATIONS AND INSTRUCTIONS FOR ASSEMBLY.
- L’apparecchio deve essere installato, collegato e testato da un tecnico autorizzato,
e seondo le regolazioni locali.
- Il cliente deve conoscere le nostre condizioni generali di vendita .
- Le lampadine devono sempre essere installate o sostituite con molta attenzione.
- Non usare mai una potenza in watt superiore a quella massima menzionata
sull’apparecchio.
- dell’installazione o della manutenzione dell’apparecchio: interrompere l’alimentazione.
- Per sostituire una lampadina: disattivare l’apparecchio e lasciar raffreddare
completamente.
- Mantenere l’apparecchio con un panno morbido, ed eventualmente imbevuto di un
 normaledetergenteconpHneutro.Lesuperciinoxdevonoesseremantenutecon 
regolarità, perciò l’apparecchio deve essere disattivato e raffreddato completamente.
- Ogniusodell’apparecchiononconformealleistruzionidatee/oognimodica 
apportato ad esso, annulla la garanzia.
- Tenergliapparecchifuoridallaportatadibambini,poichélasuperciedell’apparecchio
può essere molto calda.
- Non coprire mai gli apparecchi: p.e. con un materiale isolante.
IL FABBRICANTE HA IL DIRITTO DI CAMBIARE IL PROGETTO,
LE SPECIFICHE TECNICHE E LE ISTRUZIONI PER IL MONTAGGIO.
NEDERLANDS
ALGEMENE GEBRUIKSVOORWAARDEN
DEUTSCH
ALLGEMEINE GEBRAUCHSBEDINGUNGEN
FRANCAIS
CONDITIONS GÉNÉRALES D’UTILISATION
ENGLISH
GENERAL CONDITIONS FOR USE
ITALIANO
CONDIZIONI GENERALI D’USO
- El aparato tiene que ser colocado, conectado y probado por un técnico reconocido,
respetando el reglamento local vigente.
- Se supone que el cliente conoce nuestras condiciones generales de venta.
- Las lámparas siempre tienen que ser instaladas o reemplazadas con cuidado.
- No se puede nunca sobrepasar el vataje máximo que está indicado en el aparato.
- Corte la alimentación eléctrica antes de instalar o mantener el aparato.
- Desconecte el aparato y déjelo enfriar completamente antes de reemplazar las
lámparas.
- Para el mantenimiento del aparato se puede utilizar un pano suave o, eventualmente,
 undetergenteest ndardepH-neutro.Cuandosetratadeaparatosconunasupercie
de acero inoxidable, el mantenimiento tiene que ser afectuado con regularidad. Para la
limpieza hay que desconectar y dejar enfriar el aparato completamente.
- Todo uso impropio o toda adaptación impropia del aparato implica la anulación de la
garantía.
- Como el aparato puede alcanzar temperaturas considerables, los aparatos deben
mantenerse fuera del alcance de los ninos.
- No se puede cubrir nunca los aparatos con, por ejemplo, algún tipo de material aislante.
SON POSIBLES LAS MODIFICACIONES EN CUANTO AL DISENO,
LAS ESPECIFICACIONES Y LAS INSTRUCCIONES DE MONTAJE.
~
~
~
~
ESPANOL
CONDICIONES GENERALES DE USO