Dateq Qfm User manual

QFM
Gebruikers handleiding
User manual


NL Qfm handleiding Veiligheidsinstructies 2
Veiligheidsinstructies
1Alle veiligheidsinstructies, waarschuwingen en gebruiksaanwijzingen moeten als
eerste gelezen worden.
2Alle op het apparaat aanwezige waarschuwingen dienen opgevolgd te worden.
3De gebruiksaanwijzing dient opgevolgd te worden.
4Bewaar de gebruiksaanwijzing voor toekomstig gebruik.
5Het apparaat mag nooit in de onmiddellijke nabijheid van water worden gebruikt;
voorkom de mogelijkheid van binnentreden van water en vocht.
6Het apparaat mag alleen geplaatst of gemonteerd worden op de door de
fabrikant aanbevolen wijze.
7Het apparaat moet zo geplaatst of gemonteerd worden, dat niets een goede
ventilatie in de weg staat.
8Het apparaat mag nooit in de onmiddellijke nabijheid van warmtebronnen zoals
verwarmingsinstallatie delen, kachels, en andere warmte producerende
apparatuur (onder andere versterkers) worden geplaatst.
9Sluit het apparaat alleen aan op de juiste netspanning door middel van de door
de fabrikant aanbevolen kabels, zoals beschreven in de gebruiksaanwijzing
en/of vermeld op de aansluitzijde van het apparaat.
10 Het apparaat mag alleen worden aangesloten op een wettelijk goedgekeurde
(rand)geaarde netspanningsaansluiting.
11 De netspanningskabel of het netspanningssnoer dient zo gelegd, dat er
redelijkerwijs niet overheen gelopen kan worden of geen voorwerpen op of
tegenaan geplaatst kunnen worden welke de kabel kunnen beschadigen.
Speciaal moet rekening gehouden worden met het punt waar de kabel vast zit
aan het apparaat en waar de kabel vastzit aan de netspanningsaansluiting.
12 Voorkom dat vreemde voorwerpen en vloeistoffen in het apparaat kunnen
binnendringen.
13 Het apparaat dient op de door de fabrikant aanbevolen wijze gereinigd te
worden.
14 De netspanningskabel of het netspanningssnoer dient, indien voor langere tijd
het apparaat niet gebruikt wordt, uit de netspanningsaansluiting gehaald te
worden.
15 In alle gevallen, wanneer er na een gebeurtenis gevaar ontstaat voor onveilige
werking van het apparaat, zoals:
• na het beschadigd raken van de netspanningskabel of het netspanningssnoer
• na het binnendringen in het apparaat van vreemde voorwerpen of vloeistoffen
(onder andere water)
• na een val van het apparaat of een beschadiging van de behuizing
• na het opmerken van een verandering in de werking van het apparaat
moet het gecontroleerd worden door daarvoor bevoegd technisch personeel.
16 De gebruiker moet geen werkzaamheden aan het apparaat uitvoeren anders
dan die in de gebruiksaanwijzing staan omschreven.


5Inleiding Qfm handleiding NL
Inleiding
De Qfm is een viervoudige FM-ontvanger die voor de MusiCall centrale is ontwikkeld.
De tuner kan ook zonder het MusiCall systeem worden gebruikt.
De Qfm heeft 30 presets die door alle vier de ontvangers gezamenlijk worden
gebruikt. Aan de achterzijde zijn vier logische uitgangen te vinden waarmee externe
apparaten kunnen worden aangestuurd. Dit maakt het mogelijk de tuner te gebruiken
als zender-uitval detector, of nieuws-detector (dmv. PTY-detectie).
Qfm aansluiten
De Qfm heeft vier stereo cinch uitgangen voor de audiosignalen. Op de RS232
connector kan een PC worden aangesloten om de tuner te configureren.
De antenne wordt met behulp van een F-connector aangesloten op de tuner. De
antenne uitgang kan eventueel worden gebruikt om het antenne signaal door te
lussen naar een andere ontvanger.
• De antenne ingang van de Qfm tuner is galvanisch gescheiden van het systeem
om aard-lussen te voorkomen.
Configureren van de tuner
Aansluiten van de computer
De computer wordt met een RS232-kabel aangesloten op de tuner.
Start nu de configuratiesoftware op. Eerst moet de juiste COM-poort op de computer
worden aangegeven. Druk hiervoor op ‘Connection’ en dan op ‘Select comport’. Dit
scherm kan ook worden aangeroepen door op F12 te drukken.
Druk op ‘Auto search’, en de computer
zal nu zelf de tuner proberen te vinden.
Druk nu op ‘Save’ om de gevonden
comport te bewaren, en sluit het scherm
door op ‘OK’ te drukken.
Monit or
Fr eq
+
Pset
-
QfmStereoFMTuner
5
4
3
2
1
010
9
8
7
6
Power
M:
A
DE BY
A
,T N
LMEREHEETHERL
A
NDS
W
A
RNING: D .
T.
A
NGEROUS
V
OLT
A
GE S IN SI D E
OBE OPENEDBY
A
UTHORISED PEOPLEONLY
F:
USE
230V/ 50H /
30VA
Z
PC M C
USI ALL
L
OGICAL
OUTPUTS
1234
I
N
O
UT
Q
FM LINK
12 34
L
EFT
R
IGHT
M:
AINS
315 A
MSLOW
A
NTENNA
!

NL Qfm handleiding Configureren 6
Verbinding met de tuner maken
Druk op ‘Connection’ Æ‘Connect’, of druk op F10, om de verbinding met het
systeem actief te maken.
Presets instellen
Het instellen van de presets met
de PC software kan
door het menu ‘Qfm’Æ‘Show
presets’ te kiezen, of met de
sneltoets F8.
Het configuratiescherm wordt
geopend. Selecteer de preset
door op het bolletje te drukken, en typ de nieuwe frequentie in op het toetsenbord.
Druk op <enter> om te bevestigen.
In het veld ‘station name’ kan eventueel een stationsnaam worden ingevoerd. Deze
naam zal zichtbaar zijn tijdens het wisselen van preset.
Als alle presets zijn ingesteld kan op ‘Upload’ worden gedrukt om de nieuwe presets
op te slaan in de tuner.
Eventueel kunnen de tuners naar mono worden geschakeld. Dit kan van pas komen
als de ontvangst erg slecht is.
Met het vakje ‘Keys on front enabled’ is het mogelijk om de bedieningstoetsen van
de Qfm uit te schakelen. Deze instelling wordt direct na het aanklikken actief. Er
moet dus niet op upload worden gedrukt!
Logische uitgangen instellen
Druk in het hoofdscherm op F9, of ga via het
menu naar ‘Qfm’ Æ‘Configure logic outputs’.
Het configuratiescherm voor de logische
uitgangen wordt geopend.
Hier kan worden aangegeven wanneer een
logische uitgang actief moet worden. Uitgang 1
heeft betrekking op tuner 1, uitgang 2 op tuner
2 etc.
Er is keuze uit de volgende schakelmomenten:
• Signaalsterkte groter/ kleiner dan een
ingestelde waarde,
• Wel/ geen stereo piloot toon,
• PTY (program type) gelijk/ ongelijk aan
• Zender heeft wel/ geen RDS info
• Zender geeft op dit moment wel/ geen verkeersinformatie door
• Doorgeven van de PTY info,
Als deze optie wordt gekozen zullen de overige drie uitgangen niet meer kunnen
worden ingesteld. Nu wordt van één tuner het programma-type op de uitgangen
weergegeven. Zie voor het programmatype de onderstaande tabel.

NL Qfm handleiding Technische specificaties 8
Uitgang 4 Uitgang 3 Uitgang 2 Uitgang 1 Soort programma
0 0 0 0 Geen PTY info
0 0 0 1 Nieuws
0 0 1 0 Actualiteiten
0 0 1 1 Informatie
0 1 0 0 Sport
0 1 0 1 Onderwijs
0 1 1 0 Drama
0 1 1 1 Cultuur
1 0 0 0 Wetenschap
1 0 0 1 Gevarieerd
1 0 1 0 Pop
1 0 1 1 Rock
1 1 0 0 Achtergrond
1 1 0 1 Licht klassiek
1 1 1 0 Klassiek
1 1 1 1 Anders
= Spraakprogramma
= Muziek programma
De uitgangen zijn zogenaamde opto-couplers. De maximale te schakelen stroom is
40mA; de maximale spanning is 30V.
Gegevens van de tuner uitlezen
Als het RDS-scherm aanstaat in de
configuratiesoftware (‘Options’Æ‘Show RDS
window’) kunnen van de vier tuners de RDS-
gegevens worden uitgelezen. Tevens is de PTY-
code weer te geven door met de muis het RDS-
scherm aan te wijzen.
Wanneer met de muis wordt gedubbelklikt op de
tekst ‘Preset’ is het ook mogelijk de preset van de
tuner te wisselen.
Qfm bediening
Met de hoofdtelefoonaansluiting op het front kan een van de vier tuners worden
afgeluisterd. De actieve tuner staat in het display weergegeven. Omschakelen
tussen de tuners gebeurt door in het hoofdscherm op de + of - toets te drukken.
Presets kiezen
Om een preset te selecteren moet de Pset toets worden ingedrukt. In het scherm
komt de actuele tuner, en de gekozen preset met de bijbehorende frequentie te
staan. Druk nu op + of - om door de presets heen te lopen.
Druk nogmaal op Pset om terug te keren naar het hoofdscherm.
Presets aanpassen
Door op de Freq-toets te drukken kan de frequentie van de huidige preset worden
aangepast.
In het scherm verschijnt het actuele presetnummer en de frequentie. Druk op de + of
de - toets om de frequentie aan te passen. Druk op Freq om de nieuwe frequentie op
te slaan.
Wanneer er niet op de Freq-toets wordt gedrukt zal de Qfm na enige tijd weer terug
naar het hoofdscherm keren. De huidige frequentie zal niet worden opgeslagen,
maar blijft wel hoorbaar. Wanneer de tuner wordt uitgeschakeld, of wanneer een
andere preset wordt gekozen zal de ingestelde frequentie komen te vervallen.
Let op: de bedieningsknoppen kunnen softwarematig worden uitgeschakeld….
L
OGICAL
OUTPUTS
12 34


EN Qfm user manual Safety instructions 2
Safety instructions
1All safety instructions, warnings and operating instructions must be read first.
2All warnings on the equipment must be heeded.
3The operating instructions must be followed.
4Keep the operating instructions for future reference.
5The equipment may never be used in the immediate vicinity of water; make sure
that water and damp cannot get into the equipment.
6The equipment may only be installed or fitted in accordance with the
manufacturers recommendations.
7The equipment must be installed or fitted such that good ventilation is not
obstructed in any way.
8The equipment may never be installed in the immediate vicinity of sources of
heat, such as parts of heating units, boilers, and other equipment which
generates heat (including amplifiers).
9Connect the equipment to a power supply of the correct voltage, using only the
cables recommended by the manufacturer, as specified in the operating
instructions and/or shown on the connection side of the equipment.
10 The equipment may only be connected to a legally approved earthened mains
power supply.
11 The power cable or power cord must be positioned such that it cannot be walked
on in normal use, and objects which might damage the cable or cord cannot be
placed on it or against it. Special attention must be paid to the point at which the
cable is attached to the equipment and where the cable is connected to the
power supply.
12 Ensure that foreign objects and liquids cannot get into the equipment.
13 The equipment must be cleaned using the method recommended by the
manufacturer.
14 If the equipment is not being used for a prolonged period, the power cable or
power cord should be disconnected from the power supply.
15 In all cases where there is a risk, following an incident, that the equipment could
be unsafe, such as:
• if the power cable or power cord has been damaged
• if foreign objects or liquids (including water) have entered the equipment
• if the equipment has suffered a fall or the casing has been damaged
• if a change in the performance of the equipment is noticed
it must be checked by appropriately qualified technical staff.
16 The user may not carry out any work on the equipment other than that specified in
the operating instructions.


5Introduction Qfm manual EN
Introduction
The Qfm contains four stereo RDS FM-tuners and is developed to operate together
with the MusiCall system. The tuner also operates as a stand-alone unit, so without
the MusiCall system.
The Qfm has a total of 30 presets, that are used by all four the tuners. At the back
the tuner is equipped with four logic outputs to control other devices. This makes it
possible to use the tuner to detect a transmitter failure, or to detect the end of the
news program (by using the PTY, program type indication), and start the automation
system.
Connecting the Qfm
The Qfm has four stereo cinch busses for the audio signals and a RS232 connector
to connect to a PC for configuration purposes.
The aerial is connected with a F-connector aangesloten. The antenna output can be
used to connect a secondary tuner to the same aerial.
• The antenna input is galvanically insulated from the rest of the tuner to prevent
from ground-loops.
Configuring the tuner
Installing to the computer
The PC is connected to the tuner with a RS232 cable.
Start the configuration software. First you have to find the correct COM-port. This can
be done by clicking ‘Connection’, then ‘Select comport’. This window can be access
by pushing F12.
Press ‘Auto search’, the computer will
try to find the MusiCall system. Now
press ‘Save’ to store the comport. Close
the window by clicking ‘OK’.
Monit or
Fr eq
+
Pset
-
QfmStereoFMTuner
5
4
3
2
1
010
9
8
7
6
Power
M:
A
DE BY
A
,T N
LMEREHEETHERL
A
NDS
W
A
RNING: D .
T.
A
NGEROUS
V
OLT
A
GE S IN SI D E
OBE OPENEDBY
A
UTHORISED PEOPLEONLY
F:
USE
230V/ 50H /
30VA
Z
PC M C
USI ALL
L
OGICAL
OUTPUTS
1234
I
N
O
UT
Q
FM LINK
12 34
L
EFT
R
IGHT
M:
AINS
315 A
MSLOW
A
NTENNA
!

EN Configuring Qfm manual 6
Connecting the tuner
Select ‘Connection’ Æ‘Connect’, or push F10, to establish the connection to the
system.
Adjusting presets
Entering the presets with the PC
software select the menu ‘Qfm’ Æ
‘Show presets’, or press F8.
The configuration window is
opened. Select the preset and
enter the new frequency with the keyboard. Press <enter> to store.
The field ‘station name’ can hold the optional station name. This will be showed when
the preset is changed.
The tuner can be switched to mono. This can be useful when there is a poor
reception.
When all the presets are entered press ‘Upload’ to store the new presets in the tuner.
With the box ‘Keys on front enabled’ it is possible to enable or disable the keys.
When the state is toggled the status is updated immediately.
Configuring the logical outputs
Press F9 in the main-screen. The output-
configuration window will be opened.
Each tuner has a logical output, so output 1 is
controlled by tuner 1, output 2 is controlled by
tuner 2 and so on.
The outputs can be made active when:
• The signal strength is greater/ lower than a
given value,
• The radiostation has a stereo-pilot or not,
• PTY (program type) is equal to/ or not equal
to a given value,
• The radiostation does transmit RDS info or
not,
• The radiostation transmits traffic info or not,
• Export the PTY-info,
When this option is selected the other three outputs cannot be configured
anymore; the PTY-info of this tuner will be showed on the outputs. See the table
below.

NL Qfm handleiding Technische specificaties 8
Output 4 Output 3 Output 2 Output 1 Program type
0 0 0 0 No PTY available
0 0 0 1 News
0 0 1 0 Current affairs
0 0 1 1 Information
0 1 0 0 Sport
0 1 0 1 Education
0 1 1 0 Drama
0 1 1 1 Culture
1 0 0 0 Science
1 0 0 1 Varied
1 0 1 0 Pop
1 0 1 1 Rock
1 1 0 0 Easy listening
1 1 0 1 Light classics
1 1 1 0 Serious classics
1 1 1 1 Other
= Speech program
= Music program
The outputs are opto-couplers outputs. The maximum current through the outputs is
40mA; the maximum voltage over the outputs is 30V.
Reading data from the tuner
When the RDS-window is enabled (‘Options’Æ
‘Show RDS window’) it is possible to read the
RDS data of all four tuners. The PTY info can be
show by pointing at the RDS-window.
When the text ‘Preset’ is double-clicked the
current preset can be changed.
Qfm operation
The headphones output can be used to monitor the signal of the currently selected
tuner. The tuner number is showed in the display. To switch to another tuner simply
press the + or the - key on the Qfm-front.
Selecting a preset
To select a preset push the PSet key. The LCD-screen shows the selected tuner,
and the preset number with the corresponding frequency. Now press +, or - to scroll
through the presets. Push the PSet key again to return to the main menu.
Adjusting the preset
Pushing the Freq key adjusts the frequency of the currently selected preset. The
LCD-screen shows the preset number and the frequency. By pushing the + and - key
the frequency can be adjusted. To store the new frequency push the Freq key again.
When the Freq-key is not pressed the frequency will not be stored into the memory,
and the Qfm will display the default screen after some time. When the tuner is
switched off, or another preset is selected the manually selected frequency will be
discarded.
Note: the keys on the front can be disabled by the software…
L
OGICAL
OUTPUTS
12 34

DECLARATION OF CONFORMITY
acc.to art.10.1 EMC directive 89/336/EEC
We, DATEQ Audio Technologies B.V.
de Paal 37
1351 JG ALMERE
THE NETHERLANDS
hereby declare, exclusively to our responsibility, that this product
Type: Qfm Serialnrs.: 55-XXXX
to which this declaration applies, is in accordance with the following
harmonized European norms
EN 50081-1 and EN 50082-1
According to the regulations of the EMC-directive 89/336/EEG, amended by
directive 91/263/EEG, 92/31/EEG and 93/68/EEG.
EN 60065
According to the regulations of IEC 65: 1985 + A1: 1987 + A2: 1989 + A3:
1992, mod. Ratification: 1993-07-06
Almere, September 6th 2001 Managing director
stamp: signature:

- -- -
dealer / dealer / Vertragshändler / concessionnaire:
adres / adress / Adresse / adresse:
postcode / zip code / PLZ:
postcode / zip code / PLZ:
woonplaats / city / Wohnort / place:
woonplaats / city / Wohnort / place:
koper / buyer / Käufer / acheteur:
land / country / Land / pays:
serienr / serial # / Seriennr. / no. de série:
model / Geräte Typ / produit:
aankoopdatum / purchase date / Kaufdatum / date d'achat: aankoopdatum / purchase date / Kaufdatum / date d'achat:
serienummer / serial # / Seriennummer / no. de série:
model / Geräte Typ / produit:
handtekening / signature / Unterschrift
adres / adress / Adresse / adresse:
d d
m m
inzenden naar DATEQ bewaren met de aankoop-/kassa-bon
GARANTIE / GUARANTEE GARANTIE / GUARANTEE
mail this to DATEQ keep this with original invoice/cash
einschicken nach DATEQ behalten mit der Originalrechnung
envoyer à DATEQ conserver avec la facture originale

GARANTIE BEPALINGEN: DATEQ garandeert dat dit produkt vrij is van defecten
in materialen en/of contructie gedurende 12 maanden na aankoop. Indien
gedurende deze periode het produkt defecten vertoont tengevolge van
ondeugdelijke materialen en/of constructie zal DATEQ zonder berekening van
kosten voor arbeidsloon of onderdelen het produkt repareren volgens de
voorwaarden zoals hierna uiteen zijn gezet. 1. Garantie wordt verleend uitsluitend
op vertoon van de garantiekaart tezamen met de originele, door de dealer
afgegeven factuur/kassabon. DATEQ behoudt zich het recht voor garantie af te
wijzen indien de hierboven genoemde gegevens of het serienummer van het
produkt zijn verwijderd of veranderd na de oorspronkelijke aankoop. 2. Deze
garantie dekt niet: (a) periodieke controles, onderhoud en reparatie of vervanging
van onderdelen door normale slijtage, (b) kosten en risico van transport alsmede
voorrijkosten, direct of indirect verband houdende met de garantie van dit produkt,
(c) schade aan dit product ten gevolge van mistbruik of verkeerd gebruik met
inbegrip van maar niet beperkt tot abnormaal gebruik niet in overeenstemming met
de DATEQ instructies over juist gebruik en onderhoud van het produkt en het
installeren of gebruiken van dit produkt in tegenstrijd met de technische of
veiligheidsnormen zoals die van kricht zijn in het land waar het produkt wordt
gebruikt, reparaties uitgevoerd door niet erkende service stations, ongevallen
force majeur, of welke oorzaak dan ook buiten de macht van DATEQ, met inbegrip
van maar niet beperkt tot bliksem, water, vuur, publieke oproer en ondeugdelijke
ventilatie.
GARANTEE CONDITIONS: DATEQ guarantees this product to be free of defects
in materials and workmanship at the time of its original purchase for the period of 12
months. If during this period of guarantee the product proves defective due to
improper materials or workmanship, DATEQ will repair or this product or its
defective parts on the condetions explained hereafter. 1. The guarantee will be
granted only if the correctly filled out guarantee card is presented together with the
original invoice/cash ticket issued to the consumer by the retailer. DATEQ reserves
the right to refuse guarantee service if this information or the products serial
number has been removed or changed after the original purchase of the product. 2.
This guarantee covers none of the following: (a) periodic check-ups, maintenance,
repair or replacements of parts due to normal wear and tear, (b) home service
transport costs and other costs and risks of transport relating directly or indirectly to
theguarantee of this product, (c) damage to this product resulting from abuse and
misuse, including but not limited to the failure to use this product for its normal
purposes or in accordance with DATEQ's instructions on the proper use and
maintenance of this product and the installation or the use of this product in a
manner inconsistent with the technical or safety standards in force in the country
where the product is used, repairs done by non-authorised service stations,
accidents, acts of God, or any cause beyond thecontrol of DATEQ, including but not
limited to lightning, water, fire, public disturbances and improper ventilation.
GARANTIE BEDINGUNGEN: DATEQ gewährleistet für die Garantiezeit daß dieses
Gerät ab dem Zeitpunkt des Ersterwerbs keine Material und Verarbeitungsfehler
aufweist. Die Garantiezeit beträgt 12 Monate. Sollten sich während der Garantiezeit
Mängel des Gerätes herausstellen, die auf Material- oder Verarbeitungsfehlern
beruhen, wird gemäß den nachstehenden Bedingungen DATEQ ohne Berechnung der
Arbeits- und Materialkosten das Gerät oder seine schadhaften Teile reparieren. 1.
Garantieleistungen werden nur erbracht, wenn die Garantiekarte zusammen mit der
Originalrechnung bzw. dem Kassenbeleg, die der Händler dem Verbraucher ausgestellt
hat, vorgelegt wird. DATEQ behält sich das Recht vor, Garantieleistungen abzulehnen,
wenn nach dem Ersterwerb des Gerätes durch den Verbraucher oder den Händler diese
Angaben oder das Seriennummer entfernt oder geändert worden sind. 2. Diese
Garantie deckt keinen der folgenden Punkte: (a) regelmäßige Inspektionen, Wartung
bzw. Reparatur oder Austausch von Teilen bedingt duch normalen Verschleiß; (b)
Transport-, Fahrtkosten und -risiken, die unmittelbar oder mittelbar mit dieser
Gerätegarantie zusammenhängen; (c) Schäden an diesem Gerät, die verursacht
worden sind durch: Mißbrach und Fehlgebrauch, insbesondere Gebrauch dieses
Gerätes für andere als seinen normalen Zweck bzw. unter Nichtbeachtung der DATEQ
Bedienungs- und Wartungsanleitungen, und den Anschluß oder Gebrauch dieses
Gerätes in einer den in dem Land, in dem das Gerät bebraucht wird, geltenden
technischen oder sicherheitstechnischen Anforderungen nicht entsprechenden Weise;
Reparaturen duch nicht autorisierte Werkstätten; Unfälle, höhere Gewalt oder andere
von DATEQ nicht zu verantwordende Ursachen, insbesondere Blitzschlag, Wasser,
Feuer, Störungen der öffentlichen Ordnung und unzureichende Belüftung.
CONDITIONS DE GARANTIE:DATEQ garantit que ce produit est exempt de
défaut de matière et de fabrication existant lors de l'acquisition originale par le client
pour un délai d'un an. Si ce produit s'avère défectueux pendant la période de
garantie en raison de matière ou de fabrication incorrecte, DATEQ prendra en
charge le produit ou à défaut DATEQ sous les conditions exposées ci-après. 1. La
garantie sera seulement assurée si la facture origiale et la carte de garantie
remises au consommateur par le distributeur sont présentées. DATEQ se réserve
le droit de refuser sa garantie si tout ou partie de ces mentions ou le numero de
série de l'appareil a été ou modifié après l'acquisition originale du produit par le
client chez le distribiteur. 2. Cette garantie ne couvre aucun des points suivants: (a)
les contrôles périodiquies, l'entretien, la réparation et le remplacement de pièces
par suite d'usure normale; (b) les frais et les risques de transport directs ou indirects
à la mise en oeuvre de la garantie de ce produit; (c) l'endommagement dui produit
résultant d'abus et de mauvais usage, en particulier mais non de façon exclusieve à
la négligence ou faute l'utilisateur, et l'installation ou l'utilisation de ce produit en
contradiction avec les standards techniques ou de sécurité en vigueur dans le pays
où le produit est utilisé, reparations faites par les réparateurs non agréés;
d'accidents de cas de force majeure ou de toute autre cause hors du contrôle de
DATEQ, en particulier mas non de façon exclusieve à la foudre, l'inondation,
l'incendie, les troubles publics, des piles qui ont coulé, une mauvaise ventilation.
postzegel
stamp
briefmarke
timbre
DATEQ B.V.
De paal 37
1351 JG ALMERE
The Netherlands / Niederlande / Pays Bas
Table of contents
Languages:
Other Dateq Tuner manuals
Popular Tuner manuals by other brands

Feig Electronic
Feig Electronic OBID i-scan ID ISC.MAT-B Montage, installation

Cambridge Audio
Cambridge Audio Azur 340T user manual

RCS AUDIO-SYSTEMS
RCS AUDIO-SYSTEMS TU-110B operating instructions

Behringer
Behringer Racktuner BTR2000 quick start guide

Krüger & Matz
Krüger & Matz KM0550 owner's manual

Yamaha
Yamaha TD-2 owner's manual