DB POWER SBB-70759 User manual

Bluetooth Soundbar
User Manual
www.dbpower.co.uk / [email protected]
MODEL: SBB-70759
2018.03.0
8
17:56:26
+08'00'
2018.03.08
18:02:21
+08'00'
2018.03.0
8 19:35:41
+08'00'

What’s in the box ..........................................................................................................2
Product diagram ...........................................................................................................3
1DLNSDÊBNMSQNKÊJDXÊCDȭMHSHNMÊÊ
Battery installation for remote control.............................................................5
Placement and mounting .......................................................................................6
General operation ........................................................................................................7
Bluetooth pairing and connection.......................................................................8
Optical digital audio in operation..........................................................................8
Line in and Aux in opertation ..............................................................................10
Troubleshooting...........................................................................................................11
&DQMDQ@KÊRODBHȭB@SHNMR
FCC statement and Safety instructions.........................................................13
TABLE OF CONTENTS
2018.03.0
8
19:36:56
+08'00'

WHAT’S IN THE BOX
Soundbar Remote Control with CR2025 Battery
User Manual Power Adapter
Aux In cable
Digital Optical Cable
Line In Cable
2
2018.03.0
8 19:39:45
+08'00'

3
PRODUCT DIAGRAM:
Front View
Rear View
Top View
2. Display
1. Remote sensor
3. Speaker
8. STANDBY/
SOURCE button
9. Play/Pause button
10. Volume down button
11. Volume up button
12. Previous Button
13. Next Button
3. Speaker
Ê.OSHB@KÊHMÊ
5. Aux in 6. Line in 7. DC in jack
2018.03.
08
19:39:52
+08'00'


REMOTE CONTROL KEY DEFINITION
Power
Volume +
/QDRRÊSNÊSTQMÊNMNȬÊ
the device
Press to increase volume
Previous Next
Press to return to
previous track Press to skip to the next track
News Mode
Press to adjust news
DȬDBS
Music Mode
Press to adjust music
DȬDBS
Treble Mode
Press to enter treble
adjustment mode
Press and hold 5
seconds to restore
default settings
Pause/Play
Press to play or pause
Mute
Press to mute/unmute
Volume -
Press to decrease volume
Source
Press repeatedly to switch
Bluetooth/Optical/Line in
Aux mode
Movie Mode
/QDRRÊSNÊ@CITRSÊLNUHDÊDȬDBS
Bass Mode
Press to enter treble
adjustment mode
Press and hold 5 seconds
to restore default settings
2018.03
.08
19:39:5
8
+08'00'

5
BATTERY INSTALLATION FOR REMOTE CONTROL
Battery installation:
1. Press and slide out the battery door as shown in Fig.1.
2. Replace the battery with a new CR2025(3V) button cell with the polarity marking
upward as shown in Fig.2.
Ê(MRDQSÊSGDÊA@SSDQXÊCNNQÊA@BJÊ@F@HMÊ@MCÊL@JDÊHSÊȭQLÊ@RÊRGNVMÊHMÊ%HF
3VGCR2025
CR2025
3VGCR2025
Fig.1 Fig.2 Fig.3
CR2025
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
Ê4RDÊNMKXÊSGDÊRHYDÊ@MCÊSXODÊNEÊA@SSDQXÊRODBHȭDC
2. Be sure to follow the correct polarity when installing the battery as indicated in
the battery compartment, a reserved battery may cause damage to the device.
Ê#NÊMNSÊLHWÊCHȬDQDMSÊSXODRÊNEÊA@SSDQXÊSNFDSGDQÊÊDFÊ KJ@KHMDÊ@MCÊ"@QANMYHMBÊ
or old battery with fresh ones.
Ê(EÊSGDÊA@SSDQXÊHMÊSGDÊCDUHBDÊ@QDÊBNMRTLDCÊNQÊSGDÊCDUHBDÊHRÊMNSÊSNÊADÊTRDCÊENQÊ@ÊKNMFÊ
period of time, remove the battery to prevent damage or injury from possible
leakage.
5. Do not try to recharge the battery as it is not intended to be recharged; it can
overheat and rupture. ( Follow the battery manufacturer’s instructions.)
Ê3GDÊA@SSDQXÊRG@KKÊMNSÊADÊDWONRDCÊSNÊDWBDRRHUDÊGD@SÊRTBGÊ@RÊRTMRGHMDÊNQÊȭQD
7. Clean the battery contacts and also those of the device prior to battery installa-
tion.
8. The remote control is supplied with a coin/button cell
battery. If the coin button cell battery is swallowed, it
can cause severe internal burns in just 2 hours and can
lead to death. Keep new and used battery away from
children. If the stop using the product and keep it
CR2025
2018.03.08
19:40:05
+08'00'

6
MOUNTING TO THE WALL
PLACEMENT AND MOUNTING
1. Placing the device on table - Ventilation
When placing the Sound Bar on an entertainment center, bookshelf, or Bany type
of enclosed space, be sure to allow at least 2-3 inches of space around the Sound
Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventila-
tion, heat generated from the Sound Bar could produce a potential heat hazard.
2.1 Mounting to wooden wall
away from children.If you think battery might have been swallowed or placed any
part of the body, seek immediate medical attention.
CAUTION
λDanger of explosion if the battery is incor rectly replaced.
λReplace only with the same or equivalent type.
Remote control operation range
λÊ When there is an obstacle between the remote and the transmitter, the unit
may not operate.
λÊÊ6GDMÊCHQDBSÊRTMKHFGSÊ@MÊHMB@MCDRBDMSÊK@LOÊȮTNQDRBDMSÊK@LOÊNQÊ@MXÊNSGDQÊÊ
strong light shines on the REMOTE SENSOR of the unit, the operation of the
remote may be unstable.
29.1 inches
(screws not included)
2-3inches
2-3inches
2018.03.08
19:40:12
+08'00'

GENERAL OPERATION
7
A. Mark the position of the mounting screws on the wall using a pencil.
B. Drill the screws directly into the marks that you have made on the wall and leave
approx. 0.3 inches length to hook the sound bar.
"Ê/TSÊSGDÊRNTMCÊA@QÊNMSNÊSGDÊLNTMSHMFÊRBQDVRÊ,@JDÊRTQDÊSGDXÊ@QDÊȭQLÊ@MCÊRS@AKD
A. Mark the position of the mounting screws on the wall using a pencil.
B. Drill 2 holes on wall with a powerful electric drill.
"Ê(MRDQSÊSGDÊȭWHMFÊOKTFÊ@MCÊG@LLDQÊHMSNÊSGDÊGNKDR
#Ê2DBTQDÊSGDÊRBQDVRÊHMSNÊSGDÊȭWHMFÊOKTFÊ@MCÊKD@UDÊ@OOQNWÊÊHMBGDRÊKDMFSGÊSNÊGNNJ
the sound bar.
$Ê/TSÊSGDÊRNTMCÊA@QÊNMSNÊSGDÊLNTMSHMFÊRBQDVRÊ,@JDÊRTQDÊSGDXÊ@QDÊȭQLÊ@MCÊRS@AKD
1.Connect the adapter to the unit and wall outlet.
2.Press and hold the STANDBY/SOURCE button on the unit or press the button on
remote control to power on the unit.
3.Press the STANDBY/SOURCE button on the unit or press the SOURCE button on
remote control repeatedly to switch to desired mode.
2.2 Mounting to brick wall
RBQDVRÊ@MCÊOK@RSHBÊȭWHMFÊOKTFÊ@QDÊMNSÊHMBKTCDC
29.1 inches
BT....................................................................................................................
OPTI............................................................................................................
LINE.....................................................................................................................
AUX ......................................................................................................................
Bluetooth Mode
OPTICAL IN Mode
LINE IN Mode
AUX IN Mode
2018.03.08
19:40:19
+08'00'

8
OPTICAL DIGITAL AUDIO IN
BLUETOOTH PAIRING AND CONNECTION
1. Connect the Optical out jack from the external audio player (such as TV, DVD
player etc.) to the OPTICAL IN jack on the rear of the unit with the optical
connection cable as illustated below:(For PCM format only)
1. Power on the unit as previously explained.
2. Press the STANDBY/SOURCE button on the unit or press the SOURCE button
NMÊQDLNSDÊBNMSQNKÊQDOD@SDCKXÊTMSHKÊ!3Ê@OOD@QRÊNMÊCHROK@XÊ@MCÊȮ@RGDR
3. Power on the external Bluetooth enable device and enter Bluetooth mode and try
searching the unit.
Ê6GDMÊ2!!Ê@OOD@QRÊRDKDBSÊHSÊ@MCÊL@JDÊBNMMDBSHNM
Ê ȱDQÊRTBBDRRETKÊO@HQDCÊSGDÊ!3ÊNMÊCHROK@XÊVHKKÊRSNOÊȮ@RGHMF
6. During playback:
- Press the or button on remote control to skip tracks.
- Press the button on remote control to pause, press it again to resume.
NOTE: The unit will be automatically connected with the last paired Bluetooth device
if their Bluetooth function are activated and they are in working range.
Ê1DLNSDÊBNMSQNKÊRDSTO
- Press the Vol+ or Vol- buttons to adjust volume.
Ê/QDRRÊSGDÊ,43$ÊATSSNMÊNMÊQDLNSDÊBNMSQNKÊSNÊSTQMÊNMÊNQÊSTQMÊNȬÊSGDÊRNTMC
Ê/QDRRÊSGDÊ-$62ÊNMÊQDLNSDÊBNMSQNKÊSNÊRDSÊSGDÊMDVRÊRNTMCÊDȬDBS
Ê/QDRRÊSGDÊ,.5($ÊNMÊQDLNSDÊBNMSQNKÊSNÊRDSÊSGDÊLNUHDÊRNTMCÊDȬDBS
Ê/QDRRÊSGDÊ,42("ÊNMÊQDLNSDÊBNMSQNKÊSNÊRDSÊSGDÊLTRHBÊRNTMCÊDȬDBS
- Press the BASS button on remote control repeatedly to set bass level.
- Press the TREBLE button on remote control repeatedly to set treble level.
NOTE: Both BASS and TREBLE button have seven levels of adjustment with 0 as the
default. A single press sequentially gives +1, +2, +3, -3, -2, -1 and back to 0.
Ê6GDMÊȭMHRGÊKHRSDMHMFÊOQDRRÊ@MCÊGNKCÊSGDÊ23 -#!82.41"$ÊATSSNMÊNMÊTMHS
NQÊOQDRRÊSGDÊÊÊÊÊÊÊÊÊATSSNMÊNMÊQDLNSDÊBNMSQNKÊSNÊONVDQÊNȬÊSGDÊTMHSÊ@MCÊOTSÊHSÊHMSN
standby mode.
2018.03
.08
19:40:2
5
+08'00'

9
2. Power on the unit as previously explained.
3. Press the STANDBY/SOURCE button on the unit or press the SOURCE button
remote control repeatedly until "OPTI" appears on display.
Ê/NVDQÊNMÊSGDÊBNMMDBSDCÊDWSDQM@KÊOK@XDQÊ@MCÊRS@QSÊOK@XA@BJÊSGDÊLTRHBÊ@RÊTRT@K
Turn on the digital audio output and set it to PCM (Plus Code Modulation) type
RHLHK@QÊSNÊSGDÊENKKNVRÊȭFTQD
Optical Connection Cable
Rear View
TV or DVD player etc.
Bass
Treble
Balance
Select Move MENU Exit
Sound Mode Standard
Surround Off
AVL Off
Audio Language English
Picture Time Setup Lock Off
AudioAudio
Digital Output PCMDigital Output PCM
OPTICAL OUT
2018.03.08
19:40:32 +08'00'

10
LINE IN
An external Audio/Video player(such as TV, DVD palyer etc.) can be connected to
this unit and listen through the unit's speakers.
1. Plug one end of the Line In cable into the LINE IN jacks(L&R) on the unit.
2. Plug the other end of the line in cable into the Line Out jacks(L&R) on TV or DVD
player etc.
AUX IN
An external Audio player(such as mobile phone, MP3 palyer etc.) can be connected
to this unit and listen through the unit's speakers.
1. Plug one end of the AUX IN Cable into the AUX IN jack on the unit.
2. Plug another end of the AUX IN Cable into the headphone hack or Aux Out jack
on the external audio player.
3. Power on the unit as previously explained.
ÊÊ/QDRRÊSGDÊ23 -#!82.41"$ÊATSSNMÊNMÊSGDÊTMHSÊNQÊOQDRRÊSGDÊ2.41"$ÊATSSNM
remote control repeatedly until "LINE" appears on display.
5. Power on the connected external player and start playback the music as usual.
Rear View
white red
Line out jacks of
TV/DVD player etc.
LR
Video
2018.03.
08
19:40:42
+08'00'

11
TROUBLESHOOTING GUIDE
3. Power on the unit as previously explained.
Ê/QDRRÊSGDÊ23 -#!82.41"$ÊATSSNMÊNMÊSGDÊTMHSÊNQÊOQDRRÊSGDÊ2.41"$ÊATSSNM
remote control repeatedly until "AUX" appears on display.
5. Power on the connected external player and start playback the music as usual.
Mobile Phone
Connect to the Phones; AUX Out;
No power
No sound or
sound weak
The adapter is not connected
Volume level in minimum position
Input source incorrect
The paired/connected device
is not in playback mode
Conenct the adapter to the unit and
wall outlet
Press and hold STANDY/SOURCE
button on the unit or press the button
on remote control to power on the unit
Raise the volume level by pressing
the Vol + Button on the top of unit
Or press VOL+ button on remote control
Play music/movie in the paired/
connected device as usual and make
sure the volume level of it is in high
level.
Press the STANDY/SOURCE button
on the unit or press the SOURCE button
on remote control to switch to desired
mode
The unit is in standby mode
Line Out Jack of the external devices
(Such like MP3 Player; cell phones;
iPod/iPad ... etc)
MP3 Player
Rear View
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
2018.03.
08
19:40:49
+08'00'

12
GENERAL SPECIFICATIONS
/NVDQÊHMOTSÊ "]5Ê'Y
Power output ...................................................................................................DC16V 1.8A
TCHNÊNTSOTSÊW6
!KTDSNNSGÊDȬDWSHUDÊVNQJHMFÊQ@MFDÊHMÊNODMÊ@QD@TOÊSNÊÊEDDS
1DLNSDÊDȬDBSHUDÊVNQJHMFÊQ@MFDTOÊSNÊÊEDDS
Sound distortion
/rattle
Remote Control
not functioning
Bluetooth
reception failure
Volume level too high
Out of range
The batteries in the remote
control are drained
Point the remote contro closer to the
infrared receiver on the unit within
16 feet, +/-30 degrees,make sure
there are no obstacles in between
Replace with new battery
Put the external BT device close
to the unit.
Pair the unit with the BT Device as
the procedures stated in this manual.
The external device is
too far from the unit
'@UDÊMNSÊO@HQDC
Reduce the volume level by
pressing the Vol - Button on the
top of the unit ,Or press VOL- button
on remote control ,Reduce the
volume level of the paired/
connected device.
2018.03.08
19:40:58
+08'00'

13
FCC STATEMENT:
To assure continued operation, follow the attached installation instructions and
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired
operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
'NVDUDQÊSGDQDÊHRÊMNÊFT@Q@MSDDÊSG@SÊHMSDQEDQDMBDÊVHKKÊMNSÊNBBTQÊHMÊ@ÊO@QSHBTK@Q
installation. If this equipment does cause harmful interference to radio or
SDKDUHRHNMÊQDBDOSHNMÊVGHBGÊB@MÊADÊCDSDQLHMDCÊAXÊSTQMHMFÊSGDÊDPTHOLDMSÊNȬÊ@MC
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
λÊÊÊReorient or relocate the receiving antenna.
λÊÊÊIncrease the separation between the equipment and receiver.
λÊÊÊ"NMMDBSÊSGDÊDPTHOLDMSÊHMSNÊ@MÊNTSKDSÊNMÊ@ÊBHQBTHSÊCHȬDQDMSÊEQNLÊSG@SÊSNÊVGHBG
the receiver is connected.
λÊÊÊConsult the dealer or an experienced radio/TV technician for help.
Federal Communications
Commission Statement
2018.03.
08
19:41:04
+08'00'


TRDÊNMKXÊRGHDKCÊB@AKDRÊVGDMÊBNMMDBSHMFÊSNÊNSGDQÊCDUHBDRÊ"G@MFDRÊNQÊLNCHȭB@SHNMRÊ
not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Before using the unit, be sure to read all operating instruction carefully, please
note that these are general precautions and may not pertain to your unit. For
example, this unit may not have the capability to be connected to an outdoor
antenna.
1. Read these instructions
All the safety and operating instructions should be read before the appliance is
operated.
2. Keep these instructions
The safety and operating instructions should be kept for future reference.
IMPORTANT SAFETY INSTRUCTIONS
DANGEROUS VOLTAGE3GDÊKHFGSHMFÊȮ@RGÊVHSGÊ@QQNVGD@CÊ
symbol within an equilateral triangle is intended to alert the us er
to the presence of uninsulated “dangerous voltage” within the
OQNCTBSRÊDMBKNRTQDÊSG@SÊL@XÊADÊNEÊRTȯBHDMSÊL@FMHSTCDÊSNÊ
constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
" 43(.-3.Ê1$#4"$Ê3'$Ê$+$"31("Ê2'."*Ê#.Ê-.3Ê1$,.5$Ê3'$Ê".5$1.1Ê
BACK). NO USER SERVICEABLE PART INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
ATTENTION:The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accom-
panying the appliance.
2018.03.0
8 19:41:10
+08'00'

15
3. Heed all warnings
All warnings on the appliance and in the operating instructions should be
adhered to.
4. Follow all instructions
All operation and use instructions should be followed.
5. Do not use this apparatus near water
The appliance should not be used near water; for example, near a bath tub,wash-
bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming
pool.
6. Clean only with dry cloth
The appliance should be cleaned only as recommended by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Outdoor antenna grounding
If an outside antenna is connected to the product, be sure the antenna system
is grounded so as to provide some protection against voltage surges and built
up static charges. Section 810 of the National Electric Code ANSI/ NFPA 70
provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead- in wire to an antenna discharge
product, size of grounding conductors, location of antenna- discharge product,
connection to grounding electrodes and requirements for the grounding
electrodes.
9. Service
Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to
PT@KHȭDCÊRDQUHBDÊODQRNMMDK
is a trademark on a registered trademark of Bluetooth
SIG Inc. All other trademarks and trade names are
those of their respective owners.
2018.0
3.08
19:41:1
7
+08'00'