Deep Sea Electronics Plc M870 User manual

TYPICAL CONNECTIONS
FUSING
Select fuses appropriately to protect the circuits connected to the device’s outputs.
Pin
Description
Comments
Recommended
Fuse Size
A7
ECU Supply
Supplies M870 CPU
3 A Max
A13
Ignition (15)
1 A Max
C1
Output Supply
Supplies Outputs QC001 (Pin C2),
QC002 (Pin C3), QC003 (Pin C4),
QC004 (Pin C5).
10 A Max
C13
Auxiliary Supply
Output
Used to Supply External Devices
Internally Protected From Overcurrent.
500 mA Max
DEEP SEA ELECTRONICS PLC
M870 Installation Instructions
These instructions are intended as a quick guide only. For complete instructions
and specifications, refer to DSE publication 057-246 M870 Operator Manual
available from www.deepseaplc.com.
NOTE: Cables / wires must be installed as indicated by the
manufacturer to prevent water entering the device. Part number of suitable
connectors are detailed in DSE publication 057-246 M870 Operator
Manual available from www.deepseaplc.com.
NOTE: Interference coupling must be avoided by correctly handling
unused cable cores.
NOTE: To ensure IP67 rating the supplied M12 protection plugs must
be installed in both the USB and Ethernet interfaces when not in use.
NOTE: To ensure the protection of the device against electrical
interference and the safe function of the device, the rear heatsink earth
point must be connected to the ground of the vehicle / machine.
NOTE: Software and associated Device Descriptors are available from
www.deepseaplc.com.
Deep Sea Electronics PLC
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.deepseaplc.com
Deep Sea Electronics Inc.
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.deepseausa.com
053-187 ISSUE 1

DIMENSIONS
Description
Specification
Overall Dimensions (Height x Width x Depth)
278 mm x 171 mm x 81 mm
(10.94 ” x 6.72 ” x 3.21 ”)
Overall Weight
<2 kg
(<4.4 lb)
Mounting Type
Mounting Bolts or RAM Mount.
Fascia Mounting Holes
8 (Eight) Holes
Suitable for M5 Bolts
(0.3 “ holes)
Fascia Mounting Hole Centres
See Dimensions Diagram
Panel Cut-out
231 mm x 133 mm
(9.09 “ x 5.24 “)
Fascia Mounting Bolt Material Recommendation
Steel or Stainless Steel
Fascia Mounting Bolt Tightening Torque
1.2 Nm Maximum
(0.6 ft. lb Maximum)
RAM Mounting Holes
Suitable for M5 Bolts
(0.3 “ Holes)
RAM Mounting Hole Centres
38.1 mm x 30.2 mm
(1.50 “ x 1.19 “)
RAM Mounting Bolt Material Recommendation
Steel or Stainless Steel
RAM Mounting Bolt Tightening Torque
4 Nm Maximum
(2.95 ft. lb Maximum)
CONNECTORS, HARNESSES AND SPARE PARTS
Description
DSE
Part
Manufacturer Details
M870 Connectors
007-850
007-851
DT16-18SA-K004
DT16-18SC-K004
TE /
Deutsch
Connector Pin Crimp
(0.5 mm2 to 1.0 mm2)
N/A
0462-201-16
TE
Connector Pin Crimp
(2 mm2)
0462-209-16
TE
M870 Connector Harness Kit
(Set of 2)
016-167
N/A
DSE
M12 to Ethernet Cable
016-160
VS-M12MS-IP20-93R-L1/2
Phoenix
M12 to USB Cable
016-161
N/A
DSE
Belden 9841 (CAN Cable)
016-030
9841
Belden
Panel Mounting Sealing
Gasket
020-579
N/A
DSE
DIMENSIONS DIAGRAM