delight luna User manual

MANUAL
ENGLISH V1
@DELIGHTLIGHTING
WWW.DELIGHTLIGHTING.EU

TABLE OF CONTENTS
Dimensions 3
Before Using 4
What’s inside
Open box instruction
AC power supply
Introduction 5
Specifications
Product features
Product Introduction 7
Installation 8
Installation requirements
Power supply connection
DMX signal connection
DMX address setting
Operating instructions 11
Control board function
Menu Map
Menu Instruction
DMX Channel Table 25
DIMENSIONS
All dimensions are in millimeters
WWW.DELIGHTLIGHTING.NL 2
WWW.DELIGHTLIGHTING.NL 3

BEFORE USING
What’s inside
- Equipment
- Power cable with plug
- User manual
- 2x Iron holder
Open Box Instruction
Please open the equipment carefully, and check all the spare
parts are included or not. If any part of the cause of the failure
due to improper transportation or carton, please keep the
packing materials and immediately inform the shipper to
check. If the equipment must be returned to the factory, the
equipment should be use the original carton and packaging.
AC Power Supply
The equipment power supply is able to adapt to the wide input
voltage. Please confirm the input voltage is in the scale of
rated voltage. The equipment can adapt to100V-240V AC
voltage，Frequency50-60HZ。It cannot run a rheostat
(variable resistor) or dimmer circuits.
INTRODUCTION
Specifications
•Rated Voltage:AC100V~240V 50-60HZ 
•Rated Power: 450W 
•LED: 36x15W High power RGBW LEDs 
•LED Drive Current: 1A 
•Beam Angle: 10°(25°,40°optional) 
•IP Class: IP65 
•DMX Mode: 2/3/4/13/16/29CH
•Packing Size:585x220x425mm 
•Net weight: 13.2Kg 
•Gross weight:15.5Kg 
Product features
•Mode of control: DMX512, WDMX, Master/slave.
•2.4G Wireless DMX control.
•Setting and Addressing: RDM
•DMX function: Dimmer, Strobe, RGBW, Macro color,
Color fade, Rainbow, Auto Program, Auto speed, Curve
dimmer select, Function setting
•Stand-alone mode: Color step, Color shade, Auto,
Slave, Macro color, Static, Color setting, Rainbow, Auto
program choice.
•Housing: Aluminum
•Housing color: Black
•2.4inch TFT color display screen
•Refresh rate:3000Hz.
•Operation temperature: -20°C~+40°C.
WWW.DELIGHTLIGHTING.NL 4
WWW.DELIGHTLIGHTING.NL 5

•6 Kinds of DMX modes:2/3/4/13/16/29CH.
•Dimmer mode: 2 kinds.
•4 kinds of curve dimmer: Linear Dimmer, Square
Dimmer, square dimmer, s-curve Dimmer.
•Display board can be 180°in turn, it can be fitted in
different setting.
•Strobe effect: plus random, ramp up random, ramp
down random, random strobe, strobe break effect, 5s -
1s, strobe 0-20Hz.
•Perfect mixing color and rainbow effect
•Cooling system: fan cooling (Auto high-speed).
•Certificates: CE, ROHS
PRODUCT INFORMATION
WWW.DELIGHTLIGHTING.NL 6
WWW.DELIGHTLIGHTING.NL 7

INSTALLATION
Installation Requirements
•This equipment can be used in many places, it can
hang and put on the ground。
•Choosing a suitable place to put or hang the equipment
when installation. Must be use the special screws and
hook to make sure the lamp’s weight is in the weight
range。
•When installing the equipment, ensure no inflammable
and explosive goods at 0.5-meter distance.
•Please ask the professionals to install the equipment,
any improper installation will cause personal injury or
material damage.
•To prevent others entering the working areas below,
the installation or maintenance of equipment with
suitable and stable platform
•The equipment must be placed in ventilated place, at
least 50 cm from the ground, please ensure that the
vent without clogging.
Power supply connection
The equipment can be used in the wide voltage input. Please
make sure the voltage is the scale of rated voltage when
connecting the power. The equipment can adapt to 100V to
240 V AC voltage and 50-60 Hz.
Brown
AC Live
1
Blue
AC Neutral
2
Green/Yellow
AC Ground
3
DMX Signal Connection
1. Use DMX512 controller, use the DMX signal (male) to plug
into the first light (female) 3 pin.
2. Put out of the equipment of the first signal wire (head),
connected to the equipment of the next 3 pin plug (female), so
on. See bellowed pictures.
How to turn the controller line from 3-pins into 5-pins (plug and
socket).
4:Wireless to DMX
Terminator
WWW.DELIGHTLIGHTING.NL 8
WWW.DELIGHTLIGHTING.NL 9

DMX to DMX:
Wireless to DMX:
Wireless Control:
Master/Slave:
OPERATING INSTRUCTIONS
Button
Function
Mode
Choose mode or function exit
Enter
Current show menu or enter into the current
selected function
Up
Increase the value
Down
Decresase the value
• When the spotlight is properly connected to the mains,
“Software Update, Please Wait” (only for internal purposes),
“Welcome to LED Wash”, the model name and software
version appear successively on the display during the start-up
process. After this operation, the spotlight is ready for use and
starts in the mode that was previously selected.
• If one of the DMX operating modes is activated and there is
no DMX signal at the DMX input, the display starts to flash
after a few seconds.• After approximately 30 seconds of
inactivity, the display will automatically show the currently
active operating mode.
• Fast Access Feature: In order to simplify the menu guide, the
device has an intelligent menu structure which allows menu
and sub-menu itemsthat were last selected to be accessed
directly. 1. Pressing MODE and ENTER simultaneously will
take you directly to the sub-menu item that was last edited and
allows you to instantly change the corresponding value as
desired (DMX start address and all operating modes). 2.
Pressing MODE will take you directly to the menu item that
was last selected and edited; now press ENTER to instantly
access the sub-menu item that was selected and edited last
(DMX start address and all operating modes).
WWW.DELIGHTLIGHTING.NL 10

Menu Map
Menu Instruction
Main Display DMX Mode:
In the upper line of the display, the DMX (DMX
2Ch,3Ch1,3Ch2,4Ch,13Ch,16Ch,29Ch) is display and the
DMX start address is prominently shown in the center (for
example DMX13Ch and ADDRESS 001). As soon as the DMX
signal is interrupted, the display starts flashing; if the DMX
signal is present again, the display stops flashing.
Main Display Slave Mode:
In the upper line the display, the preset DMX is displayed and
“SALVE” is prominently shown in the center. As soon as the
control signal is interrupted, the display starts flashing; if the
control signal is present again, the display stops flashing.
Main Display Standalone Mode:
In the upper line of display, the preset DMX mode is displayed
and the currently activated Auto mode, static mode STATIC,
or colour macro mode COLOUR MACRO.
WWW.DELIGHTLIGHTING.NL 11
WWW.DELIGHTLIGHTING.NL 12
WWW.DELIGHTLIGHTING.NL 13

Setting the dmx start address:
Pressing MODE will take you the selection menu for system
setting. Using UP and DOWN, select the menu item
“ADDRESS” (colored background) and confirm with ENTER.
This is followed by the display of the menu item “Set DMX
Address”. Press ENTER again to select the DMX start
address as desired button using the UP and DOWM button. If
the start address is changed, the address color changes to
red. Confirm with ENTER and Press MODE twice to return to
the main display. The main display is automatically activated if
no input is made within about 30 seconds.
Setting the dmx signal select:
Pressing MODE will take you to the selection menu for system
settings. Using UP and DOWN, select the menu item “MODE”
(colored background) and confirm with ENTER. Now use the
UP and DOWN buttons once more to select the “DMX
SIGNAL SELECT” sub-menu item and confirm button pressing
ENTER. Using UP and DOWN, select the desired DMX mode
(DMX, Wireless DMX) and confirm with ENTER. Press MODE
twice to return to the main display. the main display is
automatically activated if no input id made within about 30
seconds. You will find tables with the channels of the different
DMX Signal in this manual under DMX SIGNAL CONTROL.
Setting the dmx mode:
Pressing MODE will take you to the selection menu for system
settings. Using UP and DOWM, select the menu item “MODE”
(colored background) and confirm with ENTER. Now use the
UP and DOWN buttons once more to select the “DMX MODE”
sub-menu item and confirm button pressing ENTER. Using UP
and DOWN, select the desired DMX mode (DMX 2Ch, DMX
3Ch1, DMX 3Ch2, DMX 4Ch, DMX 13Ch, DMX 16Ch, DMX29
Ch) and confirm with ENTER. Press MODE twice to return to
the main display. the main display is automatically activated if
no input id made within about 30 seconds. You will find tables
with the channels of the different DMX modes in this manual
under DMX CONTROL.
Setting the slave mode:
Pressing MODE will take you to the selection menu for system
settings. Using UP and DOWN, select the menu item “MODE”
WWW.DELIGHTLIGHTING.NL 15

UP and DOWN button once more to select the “DMX MODE”
sub-menu item and confirm button pressing ENTER and press
MODE twice to return to the main display. The main display id
automatically activated if no id made within about 30 seconds,
Connect the slave and the master unit (same model) with a
DMX cable and activate one of the standalone modes (Auto,
Static, Color Macro) on the master unit. Now the slave unit
follows the master unit.
Setting the automatic control mode:
Pressing MODE will take you to the selection menu for system
settings. Using UP and DOWN, select the menu item “MODE”
(colored background) and confirm with ENTER. Now use the
UP and DOWN buttons once more to select the “Auto” sub-
menu item and confirm button pressing ENTER, Using UP and
DOWN ，you can now select between Auto additional sub-
menu items “Auto Fading” and “Auto Jumping”. Select “Auto
Fading”, Press ENTER again to select the auto fading speed
(000-255) as desired button using the UP and DOWM button.
If set the “Auto Jumping”, Press ENTER again to select the
auto jumping speed (000-255) as desired button using the UP
and DOWM buttons.
Static Mode:
In the same way as with a DMX control unit, the static mode
allows you adjust an functions such as Dimmer, Red, Green,
Blue, White and Strobe directly on the device with values from
000 to 255. Thus, an individual scene can be created without
an additional DMX controller, pressing MODE will take you to
the selection menu for system settings. Using UP and Down,
select the menu item “Static” (colored background) and
confirm with ENTER, Use the UP and DOWN buttons to select
the function of the LED Wash that you wish to edit and confirm
button pressing ENTER. The value (dimmer, Red, Green,
Blue, White, etc., see list) of the corresponding function can
now be set from 000-255 and press ENTER to confirm the
input. Once all of the parameters have been set as desired,
press MODE three to the main
display. The main display is automatically activated if no input
WWW.DELIGHTLIGHTING.NL 16
WWW.DELIGHTLIGHTING.NL 17

Setting the color macro mode:
Pressing MODE will take you to the selection menu for system
settings. Using UP and DOWN, select the menu item “MODE”
(colored background) and confirm with ENTER. Now use the
UP and DOWN buttons once more to select the “Color Macro”
sub-menu item and confirm button pressing ENTER, Using UP
and DOWN ，you can now select 15 different color macros
are available as presets: “Red”, “Amber”, “Yellow Warm”,
“Yellow” ,“Green” ,“Turquoise” ,“Cyan” ,“Blue”, “Lavender”,
WWW.DELIGHTLIGHTING.NL 18
WWW.DELIGHTLIGHTING.NL 19

“Mauve” , “Magenta” ,“Pink” ,“Warm White”, “White” and “Cold
White”, Press ENTER and exit. press MODE three to the main
display. The main display is automatically activated if no input
made within 30 seconds.
Device Settings:
Pressing MODE will take you to the selection menu for system
settings. Using UP and DOWN, select the menu item “Setting”
(colored background) and confirm with ENTER. You will then
be taken to the sub-menu to set the sub-menu items (set list).
The main display is automatically activated if no input is made
within about 30 seconds.
WWW.DELIGHTLIGHTING.NL 20
WWW.DELIGHTLIGHTING.NL 21

Dimmer Curves
Device Information
Pressing MODE will take you to the selection menu for system
settings. Using UP and DOWN, select the menu item ”System
Info” (colored background)and confirm with ENTER. You will
then be taken to the sub-mune to display the device
information. Use the UP and DOWN panels again to select the
desired sub-menu item and then press ENTER to retrieve the
information.
WWW.DELIGHTLIGHTING.NL 22
WWW.DELIGHTLIGHTING.NL 23

Press the MODE button repeatedly to return to the main
display. The main display id automatically activated if no input
within about 30 seconds.
DMX Channel Table
WWW.DELIGHTLIGHTING.NL 24
WWW.DELIGHTLIGHTING.NL 25

WWW.DELIGHTLIGHTING.NL 26
WWW.DELIGHTLIGHTING.NL 27

WWW.DELIGHTLIGHTING.NL 28
WWW.DELIGHTLIGHTING.NL 29

WWW.DELIGHTLIGHTING.NL 30
WWW.DELIGHTLIGHTING.NL 31

WWW.DELIGHTLIGHTING.NL 32
WWW.DELIGHTLIGHTING.NL 33