Denali Audio S1001 User manual
1
S1001
BLUETOOTH DUAL STEREO SPEAKER
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR
FUTURE USE
2
Getting Started
•Remove the unit from the box.
•Remove any packaging from the product.
•Please retain all packaging until you have checked and counted all the parts and the contents
against the package contents.
Package Contents
•A pair of Bluetooth Dual Stereo Speaker
•USB rechargeable cable x2
•3.5mm AUX cable x 2
•Instruction Manual
Key Features
•Bluetooth® 2.1+EDR
•Bluetooth Dual Stereo Wireless Speaker
•Wirelessly connect both speakers for true left & right stereo play back
•Stream music wirelessly and enjoy music from both left & right speakers
•Works independently or together as paired true wireless speaker
•Built-in Mic supports handsfree chat
•Compatible with all Bluetooth enabled devices such as Smart Phones, Tablets, etc
•3.5mm AUX wired Connection for MP3/MP4 Players, iPods, computers, netbooks, laptops, etc
•Wireless Range – 26 to 33 Feet
SAFETY INSTRUCTIONS
•Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
•Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent
against electric shock, explosion and/or injury to yourself and damage to the unit.
•Do not use the unit if it has been dropped or damaged in any way.
•Repairs to electrical equipment should only be performed by a qualified electrician. Improper
repairs may place the user at serious risk.
•Do not use the unit with wet hands.
•Do not put objects into any of the openings.
•Keep the unit free from dust, lint etc.
•Do not use this unit for anything other than its intended use.
•Keep the unit out of reach of children.
•This appliance is not a toy.
•Do not use the handset at excessive levels as damage to hearing may occur.
•Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such
as sunshine, fire or the like.
3
Description of Parts
4
1
Rubber Seal Cover
2
Power ON/OFF Switch
3
Charging Port
4
AUX-input
5
Lanyard Slot
6
Volume Decrease / Previous Track
7
Play / Pause / Phone Button
8
Volume Increase / Next Track
9
Mic
10
Bluetooth LED Light Indicator
11
AUX LED Light Indicator
12
LED Charge Indicator
13
Left Speaker
14
Right Speaker
15
Bass Booster
INSTRUCTIONS FOR USE
Charging the speaker
The device has built-in rechargeable battery. When the battery is drained, device would turn OFF
automatically. You would have to recharge the battery.
Plug the Micro USB end of the included USB cable into the charging port. Plug the other end into a USB
port on your computer or other devices made for USB charging. The Red LED Light illuminates indicating
that the device is being charged.
It takes 4 to 5 hours to fully charge the device. Once the device is fully charged, LED Light would turn
OFF.
Turning ON/OFF the Speaker –
Slide the Power ON/OFF switch to turn ON or OFF the speaker with indication tone.
Connect using Bluetooth Technology manually
Turn On the speaker. You would hear a beep tone indicating that you are now in Bluetooth Pairing Mode
and Blue LED Light flashes rapidly.
Activate the Bluetooth function on your Bluetooth Device (Mobile Phone or Tablet). Please refer to
manufacturer’s instructions for instructions on enabling Bluetooth on your device.
Once you have activated Bluetooth on your device, select the device “Denali S1001” from the list of
available Bluetooth devices.
If required, enter the password ‘0000’ to confirm to finalize pairing. (Password is required only during
pairing devices for the first time)
Once paired successfully, the LED light flashes slowly.
Choose music from your Bluetooth® device and play music wireless through the speaker.
Please note pairing mode on the device will last for around 8 minutes. If no devices are paired within
around 8 minutes the device will power off automatically.
5
Once you have paired the Bluetooth speaker with a device, the speaker will remember this device and
will pair automatically when the device’s Bluetooth is activated and in range. You do not need to re-pair
any previously connected devices.
The Bluetooth speaker will attempt to automatically connect to the last device it was paired with when
switched on. If you want to pair it with a new device, please follow the steps outlined above.
Once the Bluetooth speaker is paired with your device the music will transmit through the Bluetooth
speaker. Please refer to your device’s user manual for further information.
Talking using the Bluetooth Speaker
Please ensure that you are paired with the Bluetooth Speaker to use the below functions.
Function
Operation
Button
Answer Incoming
Call
Incoming Call
Press the Phone button once to answer an incoming call.
Reject Incoming Call
Incoming Call
Press and hold the Phone button for 3 seconds.
End Call
Incoming Call
After your phone conversation, short press the Phone button
Increase Volume
During a call
Press and hold the Volume Increase button will increase the
volume.
Decrease Volume
During a call
Press and hold the Volume Decrease button will decrease the
volume.
Redial last number
Standby mode
and connected
to a device
Short press the Phone button twice.
Please Note
•Not all mobile phones support all the functions listed above. Please refer to your cell phone’s user’s
manual for further information.
•Certain functions and indication tone maybe vary depending on your mobile phone.
Listening to Music Wirelessly
Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the
Bluetooth Speaker to stream music wirelessly. Once it is paired, play music from your device.
Function Operation Button
Increase Volume
Playing music
Press and hold the Volume Increase button will increase the
volume
Decrease Volume
Playing music
Press and hold the Volume Decrease button will decrease the
volume
Pause
Playing music
A short press on the Play / Pause button will pause the music
Play
Pausing
A short press on the Play / Pause button will resume the music
6
Next Track
While playing
music
Short press the Next Track or Volume Increase button will take
you to the next track
Previous Track
While playing
music
Short press the Previous Track or Volume Decrease button will
return you to the previous track
Note:
•The above functions only can be used in Bluetooth mode only. In Aux mode, you may need to control
through your source device.
•An indication tone will alert you when the volume is adjusted to the minimum or maximum level.
Play music using “Aux-In” Jack
1. Turn ON the device.
2. Insert the 3.5 mm Aux in cable (provided) to the Line-in jack of the speaker. And, the other end
of the cable connects to the audio device (such as computer / tablet etc.).
3. The Blue LED will light up without flashing.
4. Select your favourite song at the source device
(Note: When you insert 3.5 mm Aux in cable into the Line-in jack of the speaker, the Bluetooth of the
speaker will Turn Off at once. Functions except Volume Increase or Volume Decrease can be only
controlled through source devices, while playing music in Auxiliary mode.)
Connecting two speakers and a Bluetooth device for Stereo pairing function
Activate the stereo pairing function:
1. Turn on both speakers.
2. Take one speaker, Press and hold its / and buttons at the same time until alert tones are
heard, and Blue LED light begins to blink rapidly. Now this is your “Host Speaker”, and is waiting
to pair with its “Subordinate Speaker”.Host speaker will be left channel by default.
3. Take the other speaker, hold the / and buttons at the same time until alert tones are
heard, and Blue LED light begins to flash rapidly. Place this speaker within 3 feet range from the
host speaker. At this point this speaker is searching for its host speaker. Both speakers will
produce another alert sound confirming they have been paired successfully. This will be the
“Subordinate Speaker”, and it will be the right channel, by default.
4. And, the Subordinate (right channel) speaker’s Blue LED light will begin to blink slowly, and this
device will not appear in the Bluetooth search on your mobile device, since it is already paired as
Subordinate speaker.
5. And, the Host (left channel) speaker’s Blue LED light continues to blink rapidly, indicating that it’s
waiting Bluetooth pairing with your mobile device.
6. At this point, activate the Bluetooth function on your mobile device, and search for Bluetooth
devices near you. Your mobile device should show one of “Denali S1002” instead of two in list,
(This is the host speaker. The reason you don’t see subordinate speaker in the list of available
7
devices is that it is already paired with the host speaker). Choose it to start the stereo pairing
function.
Note: Once the speakers have been paired together, they wouldn’t need to be paired again. They
will pair automatically every time they are on, within the range of 3 feet.
You can however, disable the stereo pairing function by using the following method.
Disable the stereo pairing function on two speakers:
1. Turn on the speakers, short press the and buttons at the same time on one unit. You will
hear alert tones indicating that stereo pairing function has been erased from respective speaker.
2. And then, repeat this step on the other speaker to erase pairing from it too
3. Now, both speakers can be found, as 2 separate devices in the Search list of your mobile device.
Resetting the speakers
1. Under unlikely circumstances when your device hangs and requires a reset.
2. To reset the Bluetooth speaker, slide the Power ON/OFF switch to OFF and then to ON position.
Specifications –
Bluetooth® Version: 2.1+EDR
Wireless Distance: 26 to 33 Feet
Speaker power: 2x2 Watts per speaker
Dimension: 6.57” (L) x 1.34” (D) x 2.32” (H) per speaker
Weight: 8.2 Oz per speaker
Power Input: DC 5V
Charging time: 4 to 5 hours
Play time: 4 to 5 hours
Built-In Rechargeable Battery: 3.7V 1500mAh
(Note: Battery life & charging time may vary based on usage & types of devices used.)
Troubleshooting
Problem
Possible Cause
Solution
Low sound level
Source (Tablet, Mobile Phone,
Laptop, etc.) volume too low.
Battery dead
Adjust source volume.
Charge Battery.
Sound distorted
Battery nearly dead
Charge Battery.
No sound at all.
Source (Tablet, Mobile Phone,
Laptop.) turned off.
Speaker turned off.
Turn the source on.
Turn the speaker on.
8
Volume turned down source.
Media paused on source.
Adjust volume source.
Play media from source.
No response from
speaker
Speaker is hanging
Reset the speaker
Care and maintenance
Read the following recommendations before using the Bluetooth speakers. Following these you will be
able to enjoy the product for many years.
•Do not expose the unit to liquid, moisture or humidity to avoid the product’s internal circuit being
affected.
•Don’t use abrasive cleaning solvents to clean the unit.
•Do not expose the unit to extremely high or low temperature as this will shorten the life of
electronic devices, destroy the battery or distort certain plastic parts.
•Don’t dispose of the unit in fire as it will result in an explosion.
•Don’t expose the unit to contact with sharp objects as this will cause scratches and damage.
•Don’t let the unit fall down onto the floor. The internal circuit might get damaged.
•Don’t attempt to disassemble the unit as it may get damaged if you are not professional.
In case the unit does not function properly, please contact the number shown on the Warranty Page for
help.
FCC Instructions
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the product.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This product generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If the product does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures :
-Reorient or relocate the receiving antenna.
-Increase the separation between the product and receiver.
-Connect the product into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Limited Warranty
This manufacturer's product warranty extends to the original consumer purchaser of the product. Neither the
retailer nor any other company involved in the sale or promotion of this product is a co-warrantor of this
manufacturer warranty.
9
WARRANTY DURATION: All materials and workmanship are warranted to the original consumer purchaser
for a period of ninety (90) days from the original purchase date.
WARRANTY COVERAGE: This product is warranted against defective materials or workmanship. This warranty
is void if the product has been damaged by accident, in shipment, unreasonable use, misuse, neglect,
improper service, commercial use, repairs by unauthorized personnel or other causes not arising out of
defects in materials or workmanship. This warranty doesn’t cover the following which may be supplied
with this product, including but not limited to; LCD Screens, glass parts, lenses, bulbs etc. This warranty is
effective only if the product is purchased and operated in USA and Canada, and does not extend to any
units which have been used in violation of written instructions furnished by manufacturer or to units which have
been altered or modified or, to damaged products or parts thereof which have had the serial number removed,
altered, defaced or rendered illegible.
WARRANTY DISCLAIMERS: This warranty is in lieu of all warranties expressed or implied and no representative or
person is authorized to assume for manufacturer any other liability in connection with the sale of our products.
There shall be no claims for defects or failure under any theory of tort, contractor commercial law including but
not limited to, negligence, gross negligence, strict liability, breach of warranty and breach of contract. Under no
circumstances will Manufacturer’s / Distributor’s maximum liability exceed the retail value of the product.
WARRANTY PERFORMANCE: During the above 90 day warranty period, a product with a defect will be either
repaired or replaced with a reconditioned comparable model (at manufacturer's option). The repaired or
replacement product will be in warranty for the balance of the 90 day warranty period and an additional
one-month period. No charge will be applicable for such repair or replacement.
SERVICE AND REPAIR: If service is required for this product, you should first contact Midwest Trading Group
EST.
NOTE: Manufacturer cannot assume responsibility for loss or damage during incoming shipment. As a
precautionary measure, carefully package the product for shipment, and insure it with the carrier. Be sure to
enclose the following details with the product: your full name, return address and daytime phone number, a
note describing the problem you experienced, a copy of your sales receipt or other proof of purchase to
determine warranty status. C.O.D. shipments cannot be accepted.
Table of contents
Other Denali Audio Speakers manuals
