Dermalogic MSI-128 User manual

Lamp x 1
Base x 1
Pole x 1
Leg with
caster x 5
LED Magnifying Lamp
ITEM: MSI-FCAPP-128
Thank you for purchasing our Dermalogic Magnifying Lamp. To use this
product safely and correctly, please read this manual carefully and abide
by all directions and notes.
Package Contents
Specification
Model NO.
Wattage
Voltage
Frequency
MSI-128
5W
110V
60Hz
Operation Instructions
1. Plug in the power plug of the LED lamp and move the magnifying lamp
above customer’s skin.
2. Turn on the power switch of the LED light and aim the magnifying
glass at the skin’s surface.
3. Adjust the distance between the lamp and the skin surface to achieve
the clearest look.
Safety Instructions
•Place the appliance on a flat, level, and solid surface.
•Power applied on this appliance must match with the rated voltage.
•When setting up the magnifying lamp, unfold it slowly to avoid injury.
•Children are not allowed to operate this appliance for safety concerns.

Install the pole onto the base
and rotate until fastened.
a. Remove the bolts from each leg.
b. Insert the legs onto the slots of
the base.
c. Screw the bolts back onto each
leg.
Insert the bottom end of the
lamp into the top of the pole
as shown.
Assembly Instructions
1
2
3
Adjusting Magnifying Lamp
You can loosen the side knob and
adjust the lamp head upward and
downward. Remember to tighten the
side knob after the angle is decided.
You can also adjust the lamp
head to right or left and adjust
the arm up and down as
shown.