
+DESIGN
Pag. 1 - rev.00
BRIGHT 2.6 - 2.7 -ACQUASTOP-
Installation instructions
IP67 Kg0.50
WARNING!!!
Pl as r ad th following instructions car fully.
ELECTRICAL CONNECTIONS:
•LED lights run at constant current.
•LED lights ust be conn ct d in parall l respecting polarities.
•
As for the choice of the power supplies, please consider the tension
through which they are fed and the ax power consu ption of
LEDs you have to install.
•
Th syst m must b f d only if all th spots ar conn ct d.
•The power supplies ust be installed in aerated roo s, far fro heat
sources. A situation of overworking or a lack of air circulation will not
per it a natural dissipation.
• Under no circu stance ust this product be covered by ther alisolating
aterial or si ilar.
Designplan Lighting, Inc., 79 Trenton Ave., Frenchtown NJ, 08825. T.908-996-7710 F.908-996-7042
Designplan Lighting, Inc., 79 Trenton Ave., Frenchtown NJ, 08825. T.908-996-7710 F.908-996-7042
IMPORTANT:
•Although LED runs on a very low voltage, always cut off the power sup-
ply efore installing the LED light or su jecting it to maintenance.
•Unauthorised alterations or tampering of the product will invalidate all
the conditions of guarantee.
•
This fixture must be installed by a qualified electrician.
•
Designplan is not resposa le if its fixtures are not installed in
according to local safety standards.
•
Data contained in this document may e changed at any moment with-
out prior notice.
NOTES:
•
Wire connections must be made with water-proof wire
nuts or similar.
3.35"
3.15"
3.35"
3.35"
3.15"