Deutsche Telekom Teledat 530 User manual

In Betrieb nehmen/
einstellen
English
29.11.2002 Teledat_730_ka-GB.fm Gerätebezeichnung: Teledat 730
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Quick Reference Guide Teledat Router 530/730
■The detailed instructions for use in the German language are to be found in the manual.
■Introduction
■Contents of the Teledat Router 530
■Contents of the Teledat Router 730
■Connecting up
The Teledat Router is a router for cable-linked local networks (Teledat Router 530) providing access to the Internet via DSL.
Teledat 730-only: For cable-linked networks as well as wireless ones via WLAN.
With the aid of a print server a printer can be shared by all computers (model 530 and 730); refer also to page 68 of the manu-
al).
Please pay careful attention to the safety notices, system requirements, installation procedure and the warranty conditions as
described in detail in the manual of the Teledat Router.
1 x Teledat Router 530
1 x plug-in power supply unit
1 x Ethernet cable Cat. 5, approx. 3.0 m
1 x Ethernet cable Cat. 5, approx. 2.0 m
1 x CD-ROM with printer port installation software
1 x quick reference guide in German and English
1 x comprehensive manual
1 x Teledat Router 730
1 x plug-in power supply unit
1 x aerial
1 x Ethernet cable Cat. 5, approx. 3.0 m
1 x Ethernet cable Cat. 5, approx. 2.0 m
1 x CD-ROM with printer port installation software
1 x quick reference guide in German and English
1 x comprehensive manual
In order to connect up the equipment you will need both of the Ethernet cables
supplied. With the exception of their lengths both cables are identical. This means
that they can be swapped over if the location of the equipment requires it. Make
sure that the computer has been switched off.
In order to connect up the Teledat Router to the splitter, plug in one of the sup-
plied Ethernet cables into the socket labelled T-DSL at the back of the equipment.
Plug the other end into the splitter.
Connect up the second Ethernet cable to one of the four LAN sockets at the
back of the router. Connect up the other end of the cable to the LAN socket of
your computer.
Connect up the Teledat Router to the mains using the plug-in power supply
unit provided.
Switch on the Teledat Router by pressing the power switch at the back of the
device.
Refer also to the following chapters in the manual:: +Inbetriebnahme +An-
schließen
Teledat Router 730
T
! ! ! ! ! ! ! ! ! !
Power
T-DSL
Online
WLAN
LAN 1
LAN 2
LAN 3
LAN 4
! ! ! ! !
dsl
Antenne
T-DSL
LAN 1
LAN 2
LAN 3
LAN 4
Drucker
Reset
12VDC/1
Ein / Aus
!!!! T
DSL
to the public net ork
Splitter
NTBA
Tele da t Router 730
T
! ! ! ! ! ! ! ! ! !
Power
T-DSL
Online
WLAN
LAN 1
LAN 2
LAN 3
LAN 4
! ! ! ! !
dsl
Antenne
T-DSL
LAN 1
LAN 2
LAN 3
LAN 4
Drucker
Reset
12VDC/1
Ein / Aus
to the Ethernet card
of the PC
Tele dat Router 730
T
! ! ! ! ! ! ! ! ! !
Power
T-DSL
Online
WLAN
LAN 1
LAN 2
LAN 3
LAN 4
! ! ! ! !
dsl
Antenne
T-DSL
LAN 1
LAN 2
LAN 3
LAN 4
Drucker
Reset
12VDC/1
Ein / Aus

29.11.2002 Teledat_730_ka-GB.fm Gerätebezeichnung: Teledat 730
■Configuring (Example: T-DSL)
Switch on your computer. The equipment will be configured using an Internet browser of your choice via the web configura-
tor integrated in the router. The Windows® Internet Explorer® will be used in the example shown here.
1. Start your Internet browser.
2. Enter the IP address 192.168.1.1 into the address line. If
there should already be an address in the address line you
must delete it first.
3. When you start up for the first time the default password
will be 1234. A new password will only be present if it has
been entered via the menu options Konfigurator - System-
einstellung - Passwort Einstellung. Enter the password
and click the Login button now.
4. The Welcome dialogue of the web configurator will then
appear.
5. If you click Assistent in this window, the dialogue enabling
you to enter the user's data will open.
6. Cli
ck the mouse in the Benutzername (user name) box and
enter the following data without spaces (example: T-Online):
Anschlusskennung (Calling line identification) (1) (in bold
type in the example below)
T-Online-Nr. (2) (in normal type in the example below)
#
Mitbenutzer-Nr (Co-user number)(in bold type in the example
below)
@t-online.de
000352549879954024054566987#[e-mail]
7. Enter the password (Kennwort) of your service provider (3).
8. Enter the password again to verify.
9. Enter the IP address if one was specified by your service
provider.
10.Leave the subnetwork mask empty.
11.Only enter data in the DNS field if required to do so by
your service provider.
12.Click the Weiter button.
13.In order that you may check the information you have gi-
ven, a window with all your specifications will now be dis-
played. If any of the data is incorrect, click the Back button
of your browser.
14.14. If the information is correct, click the Weiter button.
The status window will then be displayed. Beside ADSL is Ver-
bunden (Connected) to be seen.
Enter www.telekom.de into the address line of your browser.
The Start page of the German Telekom will then be opened.
Your Internet access has been successfully configured.