devinci Spartan Carbon User manual

Spartan Carbon
27/09/2016

DROPOUTS
(21.5 - 23.7 N∙m)
REAR AXLE
(18.1 - 20.3 N∙m)
SEATSTAY PIVOT
(13.5 - 14.1 N∙m)
CHAINSTAY PIVOT
(13.5 -1 4.1 N∙m)
LINKAGE PIVOT
(13.5 - 14.1 N∙m)
(6.2 - 7.3 N∙m)
(2.8 - 3.4 N∙m)
5.1 - 6.2 N∙m
SUSPENSION BOLT
(14.2 - 15.6 N∙m)
5
4
8
6
5.1 - 6.2 N∙m
5
5
5
5
5
FOR BRAKE MOUNT, READ
ASS. INSTRUCTION SECTION 8
PLAIN CABLE GUIDE, READ
ASS. INSTRUCTION SECTION 7
7
7
7
7
SHOCK HARDWARE
5
5
4
55
4
2
1
2
1
2
2
1
1
2
2
2
4
1
2
4
14
2
1
1
3
1
2
1
2
2
2
WARNING:
MAKE SURE TO
CAREFULLY READ THE
ASSEMBLY
INSTRUCTIONS AND
CLEANING
INSTRUCTIONS NOTES
ON NEXT PAGE.
REAR AXLE
CHAINSTAY PIVOT
LINKAGE PIVOT
SEATSTAY PIVOT
SPARTAN CARBON 2018
RevA
ITEMS #SERVICE KIT DESCRIPTION
1 KFC18003 BEARING KIT SPARTAN 2018
2 KFC18018-01 SPLIT PIVOT SHAFT SPARTAN BLACK
3 KFC11051 DERAILLEUR HANGER SPLIT PIVOT 12X142/148
SPARTAN CARBON SHOCK BOLT BLACK
CABLE GUIDE KIT SPARTAN CARBON
4 KFC18001-01
5 KFC18005
6 KFC18007 CARBON SKIDPLATE/BOLT KIT SPARTAN
SPARTAN CARBON
7 KFC18009 PROTECTOR KIT SPARTAN CARBON
8 KFC16053 FOAM FOR INTERNAL ROUTING

ASSEMBLY INSTRUCTIONS:
OF THE BEARINGS.
CARBON FRAME
ALUMINIUM FRAME
POSTION MARKS ON THE BACK.
POTENTIAL CONTACTS.
CLEANING INSTRUCTIONS:
SPARTAN CARBON 2018
RevA

ELECTRONIC TRANSMISSION AND SEATPOST
Seatpost cable
Rear derailleur cable
Rear brake cable
Cable outside the frame
Cable inside the frame Step 1
Pass the seat cable into one of the two holes in
the right cable guide and exit the end by the seat
post.
Step 1
Pass the rear brake cables into one of
the holes of the left cable guide .
Step 5
Place the other end of the cable to the rear
derailleur and pull it out through the hole in the
left cable guide
Step 2
Take out the rear brake cable
in the left cable guide .
Step 2
Pull up the cable of the rear derailleur
and pull it out in the right cable guide .
Step 6
Pick up and wrap the excess speed cables with
a plastic clamp and do not obstruct the battery.
Step 1
Unscrew the protective panel under the
downtube and insert the battery.
Step 3 l Step 3
Enter the rear derailleur cable into the straw
under the base of the rear derailleur cable.
*Do the same for the brake cable.*
Step 4 l Step 4
Remove the cable of the rear derailleur
from the straw above the base.
*Do the same for the brake cable.*
Step 5 l Step 7
Attach the cable with zip ties
into the holes provided for this.
*Do the same for the brake cable.*
Step 6 l Step 8
Attach the rear derailleur cable with
the cable guide attached to the rear suspension.
*Do the same for the brake cable.*
**The hole goes on front side of the bike**
Step 7 l Step 9 l Step 2
Attach the cable with a plastic clamp
in the holes provided for this.

CABLE TRANSMISSION AND SEATPOST
Seatpost cable
Rear derailleur cable
Rear brake cable
Cable outside the frame
Cable inside the frame
Step 2
Pass the rear derailleur into the holes of the
cable guide.
Step 1
Pass the seat cable into one of the holes of the
right cable guide.
Step 4
Enter the rear derailleur cable in the
straw under the base.
*Do the same for the brake cable.*
Step 5
Remove the cable from the rear derail-
leur of the straw above the base.
*Do the same for the brake cable.*
Step 6
Attach the cable with zip ties
into the holes provided for this.
*Do the same for the brake cable.*
Step 7
Attach the cable of the rear derailleur with
the cable guide attached to the rear suspension.
*Do the same for the brake cable.*
**The hole goes on front side of the bike**
Step 8
Attach the cables with plastic clamps in the
holes provided for this.
*Do the same for the brake cable.*
Step 3
Remove the rear derailleur cable in the
right cable guide and the rear brake
cable in the left cable guide.