Digimerge Dnb6300v User manual

HARDWARE MANUAL

English version 1.0

DNB6300V

DNB6300V Networkable Camera

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO A QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT, FULLY INSERT.

The Digimerge DNB6300V heavy duty day/night Network camera is designed for large

high security outdoor applications where vandal resistance, weatherproof

construction, 330 ft. (100.6M) IR illumination and the flexibility of Varifocal lens

adjustment are required.

Visit us on the web for a full range of IP Products at:

http://www.digimerge.com

Revision 1.0 3

Important Safeguards

In addition to the careful attention devoted to quality standards in the manufacture process of your video

product, safety is a major factor in the design of every instrument. However, safety is your responsibility too.

This sheet lists important information that will help to assure your enjoyment and proper use of the video

product and accessory equipment. Please read them carefully before operating your video product.

Installation

1. Read and Follow Instructions - All the safety and

operating instructions should be read before the

video product is operated. Follow all operating

instructions.

2. Retain Instructions - The safety and operating

instructions should be retained for future reference.

3. Heed Warnings - Comply with all warnings on the

video product and in the operating instructions.

4. Polarization - Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other.

A grounding type plug has two blades

and a third grounding prong.

The wide blade or the third prong are

provided for your safety.

If the provided plug does not fit into

your outlet, consult an electrician.

5. Power Sources - This video product should be

operated only from the type of power source

indicated on the marking label. If you are not sure of

the type of power supply to your location, consult

your video dealer. For video products intended to

operate from battery power, or other sources, refer

to the operating instructions.

6. Overloading - Do not overload wall outlets with

extension cords as this can result in the risk of fire

or electric shock. Overloaded AC outlets, extension

cords, frayed power cords, damaged or cracked wire

insulation, and broken plugs are dangerous. They

may result in a shock or fire hazard. Periodically

examine the cord, and if its appearance indicates

damage or deteriorated insulation, have it replaced

by your service technician.

7. Power-Cord Protection - Power supply cords should

be routed so that they are not likely to be walked on

or pinched by items placed upon or against them,

paying particular attention to cords at plugs,

convenience receptacles, and the point where they

exit from the video product.

8. Ventilation - Slots and openings in the case are

provided for ventilation to ensure reliable operation

of the video product and to protect it from

overheating. These openings must not be blocked

or covered. The openings should never be blocked

by placing the video equipment on a bed, sofa, rug,

or other similar surface. This video product should

never be placed near or over a radiator or heat

a built-in installation such as a bookcase or rack

unless proper ventilation is provided and the video

product manufacturer’s instructions have been

followed.

9. Attachments - Do not use attachments unless

recommended by the video product manufacturer as

they may cause a hazard.

10. Water and Moisture - Do not use this video product

near water. For example, near a bath tub, wash bowl,

kitchen sink or laundry tub, in a wet basement, near

a swimming pool and the like.

Caution: Maintain electrical safety. Powerline

operated equipment or accessories connected to

this unit should bear the UL listing mark of CSA

certification mark on the accessory itself and should

not be modified so as to defeat the safety features.

This will help avoid any potential hazard from

electrical shock or fire. If in doubt, contact qualified

service personnel.

11. Accessories - Do not place this video equipment

on an unstable cart, stand, tripod, or table. The video

equipment may fall, causing serious

damage to the video product. Use

this video product only with a cart,

stand, tripod, bracket, or table

recommended by the

manufacturer or sold with the video

product. Any mounting of the product

should follow the manufacturer’s

instructions and use a mounting accessory

recommended by the manufacturer.

Important Safeguards

Service

13. Servicing - Do not attempt to service this video

equipment yourself as opening or removing covers

may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service

personnel.

14. Conditions Requiring Service - Unplug this video

product from the wall outlet and refer servicing to

qualified service personnel under the following

conditions.

A. When the power supply cord or plug is

damaged.

B. If liquid has been spilled or objects have fallen

into the video product.

C. If the video product has been exposed to rain

or water.

D. If the video product does not operate normally

by following the operating instructions. Adjust

only those controls that are covered by the

operating instructions. Improper adjustment of

other controls may result in damage and will often

require extensive work by a qualified technician

to restore the video product to its normal

operation.

E. If the video product has been dropped or the

cabinet has been damaged.

F. When the video product exhibits a distinct

change in performance. This indicates a need for

service.

15. Replacement Parts - When replacement parts are

required, have the service technician verify that the

replacements used have the same safety

characteristics as the original parts. Use of

replacements specified by the video product

manufacturer can prevent fire, electric shock or other

hazards.

16. Safety Check - Upon completion of any service or

repairs to this video product, ask the service

technician to perform safety checks recommended

by the manufacturer to determine that the video

product is in safe operating condition.

17. Wall or Ceiling Mounting - The Cameras provided

with this system should be mounted to a wall or

ceiling only as instructed in this guide, using the

provided mounting brackets.

18. Heat - The product should be situated away from

heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers) that

produce heat.

Use

19. Cleaning - Unplug the video product from the wall

outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

20. Product and Cart Combination - Video and cart

combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may

cause the video product and car combination to

overturn.

21. Object and Liquid Entry - Never push objects for

any kind into this video product through openings as

they may touch dangerous voltage points or

“short-out” parts that could result in a fire or electric

shock. Never spill liquid of any kind on the video

product.

22. Lightning - For added protection for this video

product during a lightning storm, or when it is left

unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage

to the video product due to lightning and power line

surges.

Revision 1.0 5

General Precautions

FCC CLASS B NOTICE

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in-

stalled and used in accordance with the instruction, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception (which can be determined by turning the equipment on

and off), the user is encouraged to try to correct the interference by one or more of the following measures:

zReorient or relocate the receiving antenna

zIncrease the separation between the equipment and receiver

zConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected

zConsult the dealer or an experienced radio or television technician for assistance

DIGIMERGE TECHNOLOGIES INC.

http://www.digimerge.com

NOTE

This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it

is designated to provide reasonable protection against interference and will not cause interference with other appliance

usage.

However, it is imperative that the user follows this manuals guidelines to avoid improper usage which may result in

damage to the unit, electrical shock and fire hazard injury

In order to improve the feature functions and quality of this product, the specifications are subject to change without

notice from time to time.

General Precautions

1. All warnings and instructions of this manual should be followed

2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth

for cleaning

3. Do not use this unit in humid or wet places

4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked

5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply, antenna, and cables

to protect the unit from electrical surge

DNB6300V Camera Features SECTION 1

DNB6300V Camera Features

Technology

• High Resolution (540TV lines)

• Sony 1/3” Super HAD CCD Image Sensor

• MPEG-4/MJPEG Dual Codec

• Up to full D1 resolution at 30 fps

• Video out for connecting to monitors, DVRs etc.

• 7.5 – 50mm Varifocal DC Iris Lens Included

• IR Cut Filter

• IR LED Array with 330 ft. (100.6M) IR Range

• Built-in Blower / Heater Vandal Resistant Weatherproof IP66 Compliant Housing

• Multi Channel NVR Viewing / Recording Software

Advanced Features

• Built-in HTTP Web Server.

• IP address assignment via DHCP.

• Provides recording functions on remote host storage devices.

• DDNS support for dynamic IP application.

• Remotely upgradeable firmware.

• Video stream supported by widely available media players (i.e. Apple Quicktime™, VLC

Player, Media Player).

Revision 1.0 7

Table of Contents

TOC

Table of Contents

Section 1 - GETTING STARTED ....................................................... 9~10

Package Contents ......................................................................... 10

Section 2 - PRODUCT OVERVIEW ................................................. 11~14

DNB6300V - Connector Ports ........................................................ 12

DNB6300V - Power Ports .............................................................. 13

DNB6300V - Lens Adjustment....................................................... 14

Section 3 - INSTALLATION ............................................................. 15~20

Installation Overview ................................................................ 16~20

A. Hardware Installation - Power .................................................................................. 16

B. Hardware Installation - Optional GPIO Connections ................................................ 18

C. Adjusting the Included Lens ..................................................................................... 18

D. Software Installation Overview ................................................................................. 19

Section 4 - NETWORK CONNECTIVITY ......................................... 21~29

Network Connectivity Overview ..................................................... 22

Locating the MAC and IP Address ................................................. 23

Router Port Forwarding ................................................................. 24

Setting Up Your DDNS Account .............................................. 25~26

DigiViewer DDNS Setup ................................................................ 27

Remote Access with Internet Explorer ..................................... 28~29

Internet Explorer Security Warnings ............................................................................. 28

Internet Explorer Security Warnings - Program Installation .......................................... 29

Internet Explorer Security Warnings - Windows Firewall .............................................. 29

Table of Contents TOC

Section 5 - APPENDICES ................................................................ 31~42

Appendix #1 - Camera Specifications ...................................... 32~33

Hardware ...................................................................................................................... 32

Network ........................................................................................................................33

Management ................................................................................................................. 33

Other ............................................................................................................................. 33

Appendix #2 - Mini DIN GPIO Cable ....................................... 34~35

GPIO Pin Out Configuration ......................................................................................... 34

Features and Specifications of the GPIO Solid State Relay ......................................... 35

Appendix #3 - Changing the Camera Network Settings ................ 36

Menu - Edit Network Parameters .................................................................................. 36

Appendix #4 - Hardware Reset ...................................................... 37

DigiViewer Reset .......................................................................................................... 37

Hardware Reset ............................................................................................................ 37

Digimerge IP Products ................................................................... 38

Digimerge Warranty ............................................................... 39 ~ 40

GETTING STARTED

SECTION 1

Package Contents...........................10

Package Contents SECTION 1

Package Contents

The unit comes with the following components:

CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE

SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.

Software CD, Quick Installation Guide,

Hardware Manual & Housing Manual

3 ft. Ethernet Cable

1 x Heavy Duty Metal Wall Mount Arm

1 x Mounting Hardware

2 x Security HEX Tools

GPIO Mini-DIN/Terminal Block

Conversion Cable

High Resolution Heavy Duty

Varifocal Day/Night Bullet Camera

PRODUCT OVERVIEW

SECTION 2

DNB6300V - Connector Ports ............12

DNB6300V - Power Ports ...................13

DNB6300V - Lens Adjustment............14

DNB6300V - Connector Ports SECTION 2

DNB6300V - Connector Ports

to access the ports on the Camera, the lid must first be lifted (by unscrewing the 2 holding screws

using the large Hex tool).

1. CAMERA POWER INPUT PORT - Powers the Camera (do not disconnect this cable).

2. POWER / NET STATUS LED INDICATORS -.

• The Red PWR LED indicates the Power state of the Camera (ON/OFF).

• The Green NET LED indicates the Network state of the Camera. The LED will blink when

network communication occurs.

3. ETHERNET PORT - Connect an Ethernet Cable to the RJ-45 Ethernet port to connect the

Camera to the network.

NOTE: This Camera IS NOT PoE Enabled.

4. GPIO PORT (Optional Connection) - Connect the GPIO cable to the DIN connector Port. For

more details on the available connections, please see Appendix #2 in this manual.

123 4

Revision 1.0 13

DNB6300V - Power Ports

SECTION 2

DNB6300V - Power Ports

to access the ports, the lid must first be lifted (by unscrewing the 2 holding screws using the large

Hex tool). See page 17 for detailed instructions on power connections.

1. COOLING FAN POWER CABLE - Provides power to the rear cooling fan on the Camera.

NOTE: Do not disconnect this cable, or the camera may overheat.

2. IR SENSITIVITY ADJUSTMENT - Set the light level (LUX) at which the IR LEDs will activate

(MIN.~ MAX)

3. HARD WIRED POWER INPUT PORT - Provides hard wired power to the Camera.

4. IR LED POWER PORT - Provides power to the IR LEDs (do not disconnect).

123 4

DNB6300V - Lens Adjustment SECTION 2

DNB6300V - Lens Adjustment

to access the lens on the Camera, the lid must first be lifted (by unscrewing the 2 holding screws

using the large Hex tool).

A varifocal 7.5~50mm auto Iris Lens is provided with this camera which has been carefully

selected to provide the best possible image quality. As the lens mount is a CS Type, there is an

option to use any other type of CS Mount Lens, however the included lens is highly

recommended.

Included Lens - Adjustments

1. FOCUS -Adjust the lens to make the image appear sharp and well defined once the varifocal

distance has been set.

2. ZOOM - Increase or Decrease the viewing distance for the camera image (adjust the varifocal

distance between 7.5~50mm)

INSTALLATION

SECTION 3

Installation Overview .....................16~20

Hardware Installation - Power .............16

Hardware Installation - GPIO ..............18

Adjusting the Included Lens ................18

Software Installation Overview ............19

Installation Overview SECTION 3

Installation Overview

There are 3 mains steps required to perform a successful installation:

• Hardware installation:

A. Powered Install

B. Optional Connections

C. Adjusting the Included Lens

D. Software installation

A. Hardware Installation - Power

The basic Hardware installation consists of

mounting the camera and stand, connecting the

hard wired power and connecting the Ethernet cable

to the Camera. Other connections are optional.

NOTE: The cables should be run through the wall or

ceiling to the mounting location, prior to installing

the Camera.

1. Mounting Instructions: Run the Power and

Ethernet cables to the desired location.

• Cut out the cable channel hole in the Rubber

stopper. Place the stopper on the stand.

• Run the cables from the wall and through the

stand before permanently mounting the stand

to the wall or ceiling.

• Mount the stand to the wall or Ceiling using the

provided screws.

• Securely connect the camera housing to the

stand.

Revision 1.0 17

Installation Overview

SECTION 3

2. Use the provided HEX tool to loosen the screws

on the top of the camera housing. Open the lid to

access the ports.

NOTE: Make sure the Power and Ethernet Cables

have been passed through the stand and into the

housing before proceeding.

3. Power: Connect the power cables to the Green

Power Block as shown:

• Loosen the 3 screws with a screwdriver.

• Connect the wires to the labelled ports (Live,

Earth and Neutral).

• Tighten the screws to hold the wires in place.

NOTE: Please refer to the included INFRARED

ILLUMINATOR HOUSING insert for additional

details.

4. Network: Connect the network cable to the Camera

Ethernet Cable (Port).

NOTE: CAT-5 Ethernet Cabling has a maximum

effective range of 100m (330 ft.) depending on the

cable/switcher quality. For a longer run, a repeater

device may be required.

To test the video feed locally from the Camera,

temporarily connect the GPIO Connector to the

Camera (see Section B) and use the BNC

Connector to connect to TV or Monitor (a BNC

Adaptor may be required).

Installation Overview SECTION 3

B. Hardware Installation - Optional GPIO

Connections

The Optional Connection includes the use of the

GPIO Cable for Alarm and/or PTZ Control.

• Feed the wires for the desired control into the

Camera through the stand.

• Connect the GPIO Cable to the GPIO Port

located to the right of the Ethernet Cable

Connection.

• Connect the wires to the GPIO block inside the

camera housing. Tuck the GPIO block below

the bracket once complete.

NOTE: The GPIO Block is color coded and labelled.

Please see Appendix #2 for Alarm Block

connections.

C. Adjusting the Included Lens

• Use the ZOOM and FOCUS controls on the front

of the attached lens to adjust:

zFOCUS - Adjust the lens to make

the image appear sharp and well

defined once the varifocal distance

has been set.

zZOOM - Increase or Decrease the

viewing distance for the camera

image (adjust the varifocal distance

between 7.5~50mm)

NOTE: Once all internal connections have been

made, set the desired angle for the camera and

secure the tightening screw on the camera base.

Replace the cover and tighten the screws with the

HEX tool.

Focus Zoom

Revision 1.0 19

Installation Overview

SECTION 3

D. Software Installation Overview

This IP device is provided with software applications to make the most of the Device. This

includes software for installing, configuring and managing 1 or more Digimerge IP Devices.

The following applications are included:

• DigiConsole (Included) - The

Digiconsole application loads from the

CD included with your package, and

provides you with the following:

• Web links to various resources and

documentation

• Discovery of all the Digimerge IP devices on

the network

• Network configuration of IP Devices

• Installs DigiConsole and Surveillance

application on your local PC

• Warranty information and DDNS registration

• DigiViewer (Runs on the IP Device) - This

application resides on the IP Product, and is

loaded into the default browser when a

connection to the device is made.

• Apple Quicktime (Free Download) - This

application is used for displaying a live video

stream from the Device. Quicktime can be downloaded at http://www.apple.com/

quicktime

NOTE: Minimum Quicktime version installed should be 7.1.6. Microsoft Internet Explorer users

can use the Digimerge ActiveX Component (automatically installed when you view video) instead

of Quicktime to view the Video.

• Surveillance / Recording Software - Used for displaying and recording up to 32 channels.

Both MPEG-4 and MJPEG Formats are supported.

Other manuals for DNB6300V

Table of contents

Popular Network Camera manuals by other brands

Panasonic

Panasonic WV-SC385PJ installation guide

Vivotek

Vivotek FE8181 Quick installation guide

Vivotek

Vivotek FE8391-V Quick installation guide

Digimerge DNB6300V User manual

Popular Network Camera manuals by other brands