OK
Input Source
ATV
AV
PC-RGB
HDMI
ANDROID
picture1
picture2
I. How to enter the Android System
Projector is turned on after the blue screen appears.
Please press the "source" button on projector top panel or remote control
select the source of the "Android" and press the "OK" button
to enter the main interface of the Android system (Android
System Loading need a little time) .
(As shown in picture 1)
Menu
Set
Home
Delete
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1,reserved buttons,no function
2,reserved buttons,no function
3,previous,next
4,setting
5,directional keys
6,home page
7,number confirmation
8,mute
9,volume down/up
10,menu
11,confirm/play/pause
12,return
13,number input
14,delete the number
II. How to operate Android System
1) After entering the main interface of Android System (As shown in Picture 2) .
there are two operating methods which can be selected:
A) Use the special mini "Android use" remote control .
B) Insert your computer mouse (wire or wireless) into the projector's
"USB1 or USB2"Interface . (As shown in Picture 3)
2) Function description of “Android use “ remote control
Android use
picture3
YPbPr
Instructions of Android Projector
19