Kodak FLIK X10 User manual

User Manual
FULL HD MULTIMEDIA PROJECTOR KIT
KODAK FLIK X10

1. INTRODUCTION
Thankyou for purchasing the KODAK FLIK X10 Full HD Multimedia Projector Kit.
ThisUser Guide is intended to provide you with guidelines to ensure that
operationof this product is safe and does not pose risk to the user.
Anyuse that does not conform to the guidelines described in this User Guide
mayvoid the limited warranty.
Pleaseread all directions carefully before using the product and retain this guide
forreference. This product is intended for household use only. It is not intended
forcommercial use.
Thisproduct is covered by a limited one-year warranty.
Coverageis subject to limits and exclusions. See warranty for details.

• Product type: Projector
• Product length: 7.7”
• Product width: 7.7”
• Product height: 3.5”
• Native resolution: 1920 x 1080p
• Power input: 19 V, 3.78 A
• Display technology: LCD
• Light source: LED
• Light source life: 20,000 hours
• Brightness: 150 ANSI lumens
• Color saturation (NTSC): 100%
• Display colors: 16.7 million colors
• Pixel shape: Square
• Contrast ratio: 800:1
• Aspect ratio: 16:9
• Throw ratio: 1.3
• Keystone correction: Keystone ± 12°
• Projection screen size: 40” - 120”
• Projection distance: 3.9’ –11.5’ (1.2 m - 3.5 m)
• Image input modes: HDMI input x 2, USB input x 1
•
Speakers:Dual 3-watt speakers
• Audioout: 3.5 mm
• Poweron mode: ≤ 72 W
• Powero mode: ≤ 0.05 W
• Powersource required: Yes (plug-in power)
• Location:Indoor use only
• Installationrequired: No
• Adultassembly required: No
• Additionaltools required: No
• Countryof origin: China
• Warrantyincluded: Yes
• Warrantylength: 1 year
2. SPECIFICATIONS

• KODAKFLIK X10 Full HD Multimedia Projector
• Remotecontrol
• ACadapter with interchangeable plugs (US, UK, EU plugs)
• HDMI®cable
• Tripod
• 100”screen
• Packof adhesive hooks
• Carryingcase
• Userguide
• Donot attempt to disassemble this projector for any reason.
• Donot store the projector in areas where it will be exposed to high temperatures,
humidity, or direct sunlight. Exposure to any or all of these could permanently
damage the projector.
• Neverhandle the projector with damp or wet hands. This could damage the
projector or create the risk of electric shock.
• Keepthe projector out of the reach of children.
• Neverpoint the projector at someone else’s face or look directly into the projector
light. The light is bright and could cause damage.
• Donot use products such as alcohol, gasoline, diluent, or any other organic
solvent when cleaning or attempting to clean this product.
• Donot use this projector in an environment where it will be exposed to heavy dust
or humidity/moisture.
3. PACKAGECONTENTS
4. SAFETYPRECAUTIONS

• Neverdrop or shake the projector, as this could cause it to malfunction or
permanently damage the inside parts.
• Donot use the projector while bathing or in a shower.
• Donot place or store the projector where it can fall or be pulled into
a tub or sink.
• Donot place, drop, or submerge the projector in water or any other liquid.
• Ifthe projector somehow falls into water despite you taking all of the above
precautions, please do not reach into the water to retrieve it. Unplug it
immediately and then retrieve it.
• Takecare that objects and liquids do not fall or spill onto the projector.
1. Power
2. Source
3. VolumeUp
4. VolumeDown
5. FocusWheel
6. Keystone
7. Lens
8. DCCharging Port
9. HDMI®Input 1
10. HDMI®Input 2
11. USBInput 1
12. AudioOut Jack (3.5 mm)
13. IRReceiver
14. AdjustableFoot
15. TripodPort
5. PRODUCTOVERVIEW

• Donot attempt to disassemble this projector for any reason.
• Donot store the projector in areas where it will be exposed to high temperatures,
humidity, or direct sunlight. Exposure to any or all of these could permanently
damage the projector.
• Neverhandle the projector with damp or wet hands. This could damage the
projector or create the risk of electric shock.
• Keepthe projector out of the reach of children.
• Neverpoint the projector at someone else’s face or look directly into the projector
light. The light is bright and could cause damage.
• Donot use products such as alcohol, gasoline, diluent, or any other organic
solvent when cleaning or attempting to clean this product.
• Donot use this projector in an environment where it will be exposed to heavy dust
or humidity/moisture.
7
2
1
3 4
5
6
8 9 10 11 12 13
14
15

1. Power
2. Source
3. VolumeUp
4. VolumeDown
5. FocusWheel
6. Keystone
7. Lens
8. DCCharging Port
1. Power
2. Mute
3. OK/Confirm
4. NavigationButtons
5. Return
6. Source
7. SettingMenu
8. VolumeUp/Down
9. BatteryCompartment (Two (2) AAA needed)
6. REMOTECONTROL OVERVIEW

TheKODAK FLIK X10 Full HD Multimedia Projector can be placed on a tabletop, set up on
atripod, or mounted up on the ceiling. When placed on a tabletop, use the adjustable
footon the bottom of the projector to elevate the projector at an angle if needed.
Whenmounting the projector to the tripod or ceiling mount, fasten the projector using the
tripodport at the bottom of the projector.
7. MOUNTINGTHE PROJECTOR
Whilethe projector does include two (2) built-in
speakersfor regular use, you can also connect
eitherheadphones or a portable speaker to
the3.5 mm Audio Out Jack as shown in
theimage below.
8. USINGTHE AUDIO OUT JACK

Toturn the projector on or o, press the Power button on top of the projector or press the
Powerbutton on the remote control.
Youcan use this projector with:
• HDMI®Input 1
• HDMI®Input 2
• USBInput 1
Toswitch between source types, tap the Source button on top of the pro jector or use the
Sourcebutton on the remote control.
9. POWERINGTHE PROJECTOR ON/OFF
10. USINGDIFFERENT MEDIA SOURCES

MAINPAGE:
• The Main Page is your start page for all operations with your projector.
• When unit is powered on, the Main Page will load automatically.
• To return to the Main Page at any time, press the Back button until the
Main Page loads.
Video:Navigate to this icon and press the OK button to select. This will access
theVideo page, where your video files will be available for playback.
Photo:Navigate to this icon and press the OK button to select. This will access
thePhoto page, where your photo files will be available for playback.
11. NAVIGATINGYOUR PROJECTOR

HDMI®:Navigate to this icon and press the OK button to select. This will
accessthe HDMI® page, where a HDMI® source can be selected.
Setting:Navigate to this icon and press the OK button to select. This will
access the Setting page, where you can adjust the settings for
yourprojector, such as Display and Color.
VIDEOPAGE:
Yourvideo files will be displayed. Navigate to the file you wish to open and press the
OKbutton to begin playback. During playback, navigate to the Control Bar at
thebottom of the screen and press the OK button to select your desired option.
NOTE:The Video and Photo option will only be available when a USB device is
connectedto the projector. If no USB device is detected, then the Video
andPhotooption will be unavailable.
VideoOptions on the Control
Barinclude:
Play/Pause
Rewind
FastForward
Previous
Next
Stop
RepeatAll/Repeat None/Repeat 1
RandomOn/Random O 
SetA
Playlist
Info
SlowForward
StepForward
Go toTime
AspectRatio

PHOTOPAGE:
Yourphoto files will be displayed. Navigate to the file you wish to open and
pressthe OK button to open the desired file. During playback, navigate to the
ControlBar at the bottom of the screen and press the OK button to select your desired option.
HDMI®PAGE:
YourHDMI® sources will be displayed. Navigate to the HDMI® source you wish to
useand press the OK button to confirm your selection.
PhotoOptions on the Control
Barinclude:
Play/Pause
Previous
Next
Stop
RepeatAll/Repeat None/Repeat 1
RandomOn/Random O 
Music
Playlist
Info
RotateClockwise
RotateCounterclockwise
ZoomIn
ZoomOut
Slideshow

SETTINGPAGE:
Fromthe Setting Page, you can navigate to other menus using Navigation buttons on the remote.
Adjustthe language, zoom, display, and more from these menus.
VideoOptions on the Control
Barinclude:
Play/Pause
Rewind
FastForward
Previous
Next
Stop
RepeatAll/Repeat None/Repeat 1
RandomOn/Random O 
SetA
Playlist
Info
SlowForward
StepForward
Go toTime
AspectRatio
NOTE:If the projector is powered on
witha HDMI device already plugged
in,then the projector will automatically
gointo the HDMI source that is
connected.

LANGUAGEMENU:
Fromthe Setting Page, navigate to the Language option and press the OK
buttonto confirm. In the Language Menu, dierent languages can be selected.
Navigatethrough the language options and press the OK button to select
yourdesired language.
ADJUSTINGFOCUS:
Ifthe image on the screen appears fuzzy or unfocused when you turn the
projectoron, use the focus wheel on the top to correct the image. Move the wheel
leftor right until the image appears sharp and clear. The keystone dial behind the focus wheel
allowsyou to adjust the viewing angle of the screen.

NOTE:For best performance, the projector must be located a minimum distance of 3.9 feet
(1.2meter)from the screen.
ADJUSTINGVOLUME:
Toadjust the projector volume during playback, use the +and –buttons on the
topof the projector or the Volume buttons on the remote control.

DISPLAYMODE MENU:
Fromthe Setting Page, navigate to the Display Mode option and press the
OKbutton to confirm. In the Display Mode Menu, dierent display modes can
beselected. Navigate through the display modes and press the OK button to
selectyour desired display mode.
COLORMENU:
Fromthe Setting Page, navigate to the Color option and press the OK button to
confirm.In the Color Menu, dierent color options can be selected. Navigate
throughthe color options and press the OK button to select your desired color.

ROTATEMENU:
Fromthe Setting Page, navigate to the Rotate option and press the OK button to
confirm.In the Screen Rotate Menu, dierent rotate options can be selected.
Navigatethrough the rotate options and press the OK button to select your
desiredscreen rotate option.

ZOOM MENU:
Fromthe Setting Page, navigate to the Zoom option and press the OK button to
confirm.In the Zoom Menu, adjust the zoom of the screen. Use the directional
buttonson the remote control and press the OK button to confirm your
desiredzoom.

12. CONNTECTING EXTERNAL DEVICES
USBDrives
Toaccess photos or videos stored on any USB drive, simply insert the removable storage
deviceinto the USB port on the back of the projector. The projector will read the files directly
fromthe drive. You can access them from the Main Page by selecting the Photo or Video
optionson the main page.
HDMI®Compatible Devices
Whenusing an HDMI compatible device, such as a laptop, personal computer, smartphone,
tablet,video game console, or streaming device, connect an HDMI cable from the device to
yourprojector to access the device on the projector.
Forsome devices, you will require an HDMI-to-HDMI cable and/or adapters, which you will need
topurchase separately. To make things a little easier, we’ve compiled this table of devices and
adaptersfor your convenience.
NOTE:When using a streaming device such as a Fire TV Stick or a Roku® Streaming Stick™,
youcan power on the streaming device by connecting the USB cable to the USB port
onthe back of the projector.

Streamingdevices with
HDMIport HDMIcable to streaming device