Dillenger C965 User manual

Product Specification and manual
Product
Mode
Dillenger C965
APT12LCD800S
Supplier Dillenger OEM
Factory 3, 13 Olympic Circuit
Southport QLD 4215
Australia

1 Product Name
1.1 Dillenger C965
1.2 Model:APT12LCD800S
2 Suppliers
Dillenger Pty Ltd
3 Electrical Parameters
24V/36V/48V battery supply
Rated operating current : 10mA
Max operating current : 30mA
Off leakage current < 1uA
Max output current to controller : 50mA
Operating temperature : -30～70℃
Storage temperature : -40～70℃
4 Dimensions & Material
4.1 Product shell is ABS, transparent window is made with high strength Acrylic, the
stiffness equal to tempered glass.
4.2 Dimensions : host/L90mm*W54mm*H13.3mm

5 Features
Suitable for low temperature，Min -30℃.
Ergonomic satellite thumb pad design
Speed display : AVG SPEED, MAX SPEED, SPEED (Real-time).
Kilometers/ Miles: Can be set according to preference
Smart battery indicator : Provide a reliable battery indicator
The brightness of the backlight adjustable : 5 increments
9-level Assit : 3-level/5-level/6-level/9-level... optional

Mileage indicator : Odometer/Trip distance/ Riding time
Error code indicator
Parameter settings : Multiple parameter can be set through computer USB port,
including Assist level / Wheel diameter / Voltage / Speed limit…
6 LCD instructions
The figure of LCD display see below:
7 Functional Description
7.1 Power On/Off
Press and hold Power button for 1 second to turn the display on or off.
S
p
eed mode
Speed display
Battery indicator
Lamp/back-light
Brake
PAS level
ERROR code
Mileage mode Mileage
information

7.2 Assist level operating
Press UP/DOWN button momentarily to change the assist level. Top assist level is 9,
0for neutral.
Assist operting
7.3 Speed mode switch& Mileage mode switch
Momentarily press POWER button can change the speed mode& the mileage
mode, Speed->AVG Speed->MAX Speed->Trip->ODO-> Time.
Speed mode switch& Mileage mode switch
*If there is no operation for 5 seconds, display will return Speed (Real-Time) display
automatically.
7.4 Back light
Press and hold UP button for 1 second to activate back light.
Time ODO Trip
MAX speed Speed
AVG speed

7.5 6km walk
Press and hold DOWN button for 1 second to activate walk mode. Release the
button to deactivate.
7.6Data reset
Press and hold UP & DOWN buttons together for 1 second to reset temporary data,
including AVG Speed / MAX Speed / Trip / Time.
8 Parameter setting
Double click POWER button in quick succession to enter parameter settings.
Momentarily press UP/DOWN buttons to change the parameter values, momentarily
press POWER button to switch to the next parameter. Double click POWER button in
quick succession to exit from the parameter setting state. The LCD will automatically quit
the parameter setting state when there is no input for 10 seconds.
The order of parameters is as follows (next page)

8.1 Kilometer / Mile : The location of speed displays symbol S7, press UP/DOWN
button rotate display the symbol km/h / MPH (Km / Mile)
8.2 .Backlight brightness : The location of speed displays symbol bL1, press
UP/DOWN button display symbol 1~5 to change the brightness of the backlight.
8.3 Auto off time : The location of speed displays symbol OFF, press UP/DOWN
button to change the value from1to 9, the number represent delay time (minutes)
before display shutdown automatically, default value is 5 minutes.
Backlight
Brightness Auto off time Wheel diameter
Voltage setSpeed limit set
Kilometer/Mile
Password

8.4 Wheel diameter : The location of speed displays symbol Wd, press UP/DOWN
button rotate display the symbol 16/18/20/22/24/26/700C/28/29, value represents the
diameter of the wheel (inch). Wrong value for wheel diameter will cause speed&mileage
abnormal.
8.5 .Voltage set : The location of speed displays symbol bU0, press UP/DOWN button
rotate display the symbol 24V/36V/UbE, UbE means user-defined voltage setting, this
parameter can be set through computer.
8.6 Password/Speed limit set : The location of speeds displays symbol PSd, require
to input passwords, press UP/DOWN buttons to change the password value (0~9),
short press POWER button to switch the password item, password is 4 digits, the
default password is "1919". Press POWER button when password adjustment is
completed. Display will return to the Voltage set item if the password is incorrect.
Correct password will enter the Speed limit set item.

8.7 Speed limit set : The location of speed displays symbol SPL, the location of
mileage displays speed limit value, the default value is 25km/h. Press UP/DOWN
buttons to modify the value, the value can be set from 10 to 45km/h. Press POWER
button to confirm when you finish the adjustment.
The maximum speed is also restrict by the motor and controller, not always the LCD settings
9 Error Code define
Dillenger C965 will display warning messageswhen there is a detectable error.LCD
display icon and the error code in speed readout. Error code is from 01 E - 07 E.
Error Code Error description Solution
01E Communication Error Check the cable connection
02E Controller protection Check three-phase motor cable
03E three-phase power error Check three-phase motor cable
04E Battery low Charge the battery
05E Brake error Check the brake connection.
06E Turn error Check turn to connect.
07E Hall error Check the hall connection
08-99E Reserved Please contact us

10 Assembly instructions
Please pay attention to the screw’s torque value, damaged caused by excessive torque
is not within the scope of the warranty.
There are 2 methods by which the clamp can be installed