Dillenger KEY-DISP 26E User manual

KEY-DISP LED
Please read through carefully before using the display
Display User Manual
KEY-DISP 26E
English

2
Details
Product name and model
Electric bicycle LED display, model: KD26E.
Specications
- 24V/36V/48V Power supply
- Rated working current: 10mA
- Maximum working current: 30mA
- O leakage current: <1uA
- Supply controller working current: 50mA
- Working temperature: -20°C~ 60°C
- Storage temperature: -30°C~ 70°C
Dimensions
Features
- Battery level indicator
- Pedal Assistance (PAS) level indicator
- Push-assistance function
- Light on/o (optional)
Operation
The display has three buttons; up (+), down (-), and on/o (middle button).
Turning the system on/o
To turn the system on, hold the on/o (middle) button for 2s. Hold the middle button for 2s
again to turn the system o.
When the system is unused for more than 10 minutes, the system will switch o
automatically.
PAS level selection
The assistance level determines the power that the motor will provide. The default value is
level low. Press the (+) and (-) buttons to select higher and lower pedal assistance (PAS) levels.
The power levels are low, medium, and high. You can also set the PAS to zero.
The higher the level, the more power the motor will provide for you.
Battery indicator
The ve battery bars represent the charge level of the battery. When the battery level starts
getting lower, the bars will disappear one by one. It is recommended to charge the battery
before the battery level gets too low.

3
Operation
Features
- Battery level indicator
- Pedal Assistance (PAS) level indicator
- Push-assistance function
- Light on/o (optional)
Operation
The display has three buttons; up (+), down (-), and on/o (middle button).
Turning the system on/o
To turn the system on, hold the on/o (middle) button for 2s. Hold the middle button for 2s
again to turn the system o.
When the system is unused for more than 10 minutes, the system will switch o
automatically.
PAS level selection
The assistance level determines the power that the motor will provide. The default value is
level low. Press the (+) and (-) buttons to select higher and lower pedal assistance (PAS) levels.
The power levels are low, medium, and high. You can also set the PAS to zero.
The higher the level, the more power the motor will provide for you.
Battery indicator
The ve battery bars represent the charge level of the battery. When the battery level starts
getting lower, the bars will disappear one by one. It is recommended to charge the battery
before the battery level gets too low.

4
Operation continued
Using the push-assistance function
To use the push-assistance function, press and hold the (-) button. This will activate the
motor and the bike will go at a continuous speed of 6 km/h. The three power-assistance
level indicator lights will all ash while this function is in use. The push-assistance function
switches o as soon as you release the (-) button.
The push-assistance function may only be used when pushing the bike alongside you. There
is a danger of injury when the wheels of the bike do not make contact with the ground while
using the push-assistance function.
Switching the light on/o (optional)
If the lights of your bike are integrated in the system, you can use the display to turn them
on/o. To turn the lights on, press the (+) button for about two seconds until the lights turn
on. To turn them o, press the (+) button again until the lights turn o.
Connection layout

5
Dillenger HQ
CONTACT US
3/13 Olympic Circuit
Southport
QLD 4215
AUSTRALIA
Phone: [phone]
dillenger.zendesk.com
www.dillengerelectricbikes.com.au
© Dillenger 2016