Dinar AirStyle AIRBRUSH User manual
2. HAND POSITION
Hold the airbrush as you would hold a beautiful pen, with
a gentle grip and ngers extended. Find a comfortable grip
and place your index nger on the lever. Use your index nger
to gently pull back on the lever.
ON/OFF
Button
CHARGER PORT
5 Volt, 1A. Only
MAKEUP CUP
(Add Makeup Drops)
COMPRESSOR
(Air Source)
AIRBRUSH
(Makeup Atomizer)
MAKEUP LEVER
(Controls Makeup Flow)
1. AirStyle™AIRBRUSH ALL-IN-ONE
Index nger on lever controls
makeup ow. Helps hold airbrush
Airbrush rests between
middle nger and thumb
QUICK START GUIDE
Videos
►
www.AirbrushMakeup.com/Howto/Dvd/
3. BRUSH SIZE FOR FOUNDATION COVERAGE
Shadow & Lips 1-2”
The Lever in the “Ready” position, Makeup off.
You will feel a continuous air ow when the compressor is on.
“Flush & Rinse” position is used to spray out makeup or
cleaner quicker.
Charge for 1 hour before using.
Can run on charger, but will not charge while in use.
Foundation, Blush, Eye Shadow or Liner are all applied
with the same Dinair Airbrush. The airbrush applicator
coverage size varies with distance you hold the airbrush
from the face. Apply at the recommeded distance.
Do not vary distance while applying.
READY
SHADOW
BLUSH
FOUNDATION
FLUSH & RINSE
Foundation (Brush) 5-6”
Blush (Brush) 3-4”
6” 2” 1”
½”
4”
4. LEVER CONTROLS MAKEUP FLOW
Each position is suggested for the optimal amount of makeup
for each application type.
Large Small Liner
Brush Size:
Distance:
Med
WARNING: Only charge with supplied AirStyle™ charger
or USB port. DO NOT use Dinair 12 Volt Power Adapter
5. TRY WITH WATER FIRST
MISTAKES EVAPORATE WHEN PRACTICING WITH WATER!
Put a few drops of water into the makeup cup. Where you can
add and mix makeup colors. It is recommended to parctice
with water rst.
Use a safety pin to make a small hole through the pour spout
safety seal. Angle Pin towards center of bottle.
Do not remove cap. Angle bottle to 90° and squeeze gently
to dispense drops of makeup into the makeup Cup. 900angle
keeps top of cap clean.
6. OPEN NOZZLE TIP SEAL - NOT THE CAP
OPEN TIP SAFETY SEAL
WITH PIN
HOLD UPRIGHT 90°
TO DISPENSE AND
KEEP CAP CLEAN
9. AIRBRUSH SPRAYING POORLY
Add cleaner to brush and vigorously brush airbrush tip
to remove stubborn dried makeup
PINCH IT &
SCRAP OFF!
BRUSH IT!
TOOTHBRUSH
Dinair Video and Tutorial Library
Learn how to airbrush makeup online!
Full Face, Hair, nails, tanning and so much more!
Explore our Online Video Library and Online Courses:
www.AirbrushMakeup.com/howto/media/face/
Call or visit us online!
Dinair’s Award-Winning Customer Service Team
looks forward to answering your questions
M-F 8:30am-5pm, SAT 10am-2pm PST.
800.785.4770
AirbrushMakeup.com | Help@Dinair.com
DO NOT
REMOVE
CAP
1. Pick your foundation Shade
2. Put 3 drops in the Cup to start
3. Hold the airbrush like a pen,
check your color on a tissue
4. Move airbrush in a circular or
oval motion at 5-6” from face
5. Pull the lever back gradually,
feel a light coolness of makeup
6. Watch for uneven skin tones
begin to blur and blend
7. Apply lightly to whole face, add
3 drops, again. 6 to 12 drop total
8. Lightly misting face, neck and ears as skin
tone becomes blended and even
Advanced
1. If blemish areas are pronounced
apply Dinair Neutralizer* before foundation
2. For the longest lasting coverage add
Dinair Makeup Extender* to makeup
More Info
Neutralizer - Special Coverage
• Apply before foundation to neutralize (conceal)
blemishes, freckles and unwanted coloration
• Neutralizer creates an ultra thin color blocking coverage
• Neutralize rst to prevent excess foundation look
Extender
• Makeup will last longer and be more water resistant
• Weddings. Travel in a tropical areas
• Oily skin, excess perspiration
• Active lifestyle and sports
7. FOUNDATION COVERAGE
Light
Passes
Good
Distance
Pinch tip with ngernails to remove dry makeup
8.CLEAN AND STORE
When you are ready to use your airbrush - remove your
cleaning-storage cap, start compressor and rinse out
airbrush cleaner with a few drops of water.
1) Put lever wedge between
the lever and front of the cup.
Hold the lever back, in full open
position.
2) Put 5 drops of Dinair
Airbrush Cleaner in the
makeup cup. Allow cleaner
to circulate. Push the nose
cap on.
3) Squeeze the nose tip until you see foam in the makeup cup. Foaming
shows that cleaner has circulated. Airbrush is now ready to be capped.
Always store your airbrush in caps with cleaner.
Add cleaner, circulate, cap it, soak your airbrush. To keep
it clean and ready between uses.
Patent Pending
www.AirbrushMakeup.com/Shop/Airbrush_Clean/
1
2
3
