DiO Node User manual

Dio Node
User Manual
Rev. 1

Welcome to Dio!
We are so excited to welcome you to our community of
customers! Dio Node has been our labor of love to bring
your home a truly hassle-free audio experience. To keep
things hassle-free, we also designed this User Manual as a
short, fun, and easy-to-follow guide to your new speaker.
And since we know you’re going to want more for your
home, we’re giving you $10 off your next Dio speaker!
Just enter the code MOREDIO at checkout. Enjoy!
-Akarsh Vinod
Founder & CEO

Table of Contents
Setting Up Dio Node
Using Your Speaker(s)
What The Buttons Do
(Optional) Voice Assistant & Extra Features
Troubleshooting & Factory Reset
Updating Your Dio Node
Getting Support
Specs & Compatibility
Safety & Legal
FAQs
2
4
5
6
8
9
10
12
12
13

2
Setting Up Dio Node
You’re going to need your iPhone (or iPad) to set up your
speaker, so you may as well pull it out now and scan this QR
code for detailed setup instructions.
But if you’re old-fashioned, you can also find the printed
instructions on the next page
dioconnect.com/setup

3
Setting Up Dio Node (Cont.)
1. Plug in the speaker to power.
You will see a white light start to blink on the back of the speaker.
This means the speaker is booting up.
2. Wait for the speaker light to start blinking red.
This means it is now ready to be set up on Wi-Fi.
4. You will see “SET UP NEW AIRPLAY SPEAKER...” listed on the
page. Click on the Dio speaker listed and follow the
on-screen instructions to set up and name your speaker.
And...done! Ta-da! Your speaker is now ready to play.
That was easy, right?
3. Go to your iPhone/iPad’s Wi-Fi settings.
Open the Settings app, then click on “Wi-Fi”.

Using Your Speakers
4
1. Open Control Center on your iOS device
iPhone X & later: swipe down from the top-right corner of the screen
iPhone 8 & earlier: swipe up from the bottom of the screen
iPad: swipe down from the top-right corner of the screen
3. Tap on the speakers you want to use
4. Play your audio!
2. Tap on the AirPlay icon
The following instructions are for iPhone and iPad. To see how
to use Dio Node with other devices, including Apple TV, please
visit dioconnect.com/how-it-works.
Note: To use your Dio speakers, your device must be connected
to the same Wi-Fi network as your speakers.

What The Buttons Do
5
Volume UpVolume Down
Pause/Play
Additional Functions
Check for Firmware Updates: Press & hold all three buttons at once
Reset Wi-Fi Connection: Press & hold the “+” and “–” buttons
Factory Reset: Press & hold the middle and “+” buttons

(Optional) Voice Assistant & Extra Features
6
Dio Node speakers do not have microphones or voice
assistants built-in and do not require an extra app to use.
However, you may add your Dio Nodes to the Apple Home
app to enable the following features:
▶ Use Siri on your Apple devices to control Dio Node
▶ Send Intercom messages from your phone to
Nodes across the home
▶ Set up home automations for Dio Node
▶ Create speaker group presets
▶ Create shortcuts in Control Center for Dio Node
To view instructions to set this up, please go to
dioconnect.com/home-app or see the next page

Voice Assistant & Extra Features (Cont.)
7
Note: before following these instructions, make sure your Dio Node
speakers are already set up on your home Wi-Fi network as described
in the Setting Up Dio Node section
1. Open the Home app on your iPhone / iPad
2. Click the “+” sign and
select “Add Accessory”
3. Click “More options...”
above the camera screen
4. Your Dio Node will
appear on the list.
Select it and follow
on-screen instructions
to proceed.

Updating Your Dio Node
8
We may release occasional updates to improve Dio Node’s
performance or add new features. To protect your home’s
network security, we make these updates completely
opt-in. The following steps show how you can check for
and install updates on your Nodes:
1. Press and hold all three buttons on Dio Node at once.
The light on the back panel will flash. Node will now check for new
updates.
2. If the light turns green, that means Dio Node is installing
a new update
If it does not turn green, that means there are no new updates to
install and your Node is on the latest version.
For more information on each update, visit
dioconnect.com/node/release-notes. You will also receive
an email whenever a new update is released.

Troubleshooting & Factory Reset
9
Understanding the Indicator Light
Steady Red: Not connected to Wi-Fi
Blinking Red: Ready for Wi-Fi setup
Steady Green: Firmware updating
Blinking White: Speaker booting up
Steady White: Wi-Fi setup complete
Troubleshooting or Changing Your Wi-Fi Connection
If the indicator light is red or you are having other issues with your
speaker, you can reset the Wi-Fi connection. To do so, press & hold
the “+” and “–” buttons at the same time until the indicator light
flashes. Once it begins blinking red, follow the instructions on page 2
to set up your speaker again.
You may also need to update your speaker. Follow instructions on
page 8 to do so.
Factory Reset
You can reset your Node
to factory conditions by
pressing & holding the
middle and “+” buttons at
once. This will completely
reset your speaker.
Steady Blue: Speaker in use

FAQs
10
Why does it take a moment for my audio to start playing from Dio Node?
This is completely normal. Your speakers first collect a slight buffer of audio
so that they can all stay perfectly in sync even if their streaming connection
is inconsistent.
Why don’t phone calls come through my Dio Nodes?
Because Dio Node doesn’t have built-in microphones, it cannot take phone
calls. As such, phone calls won’t play on Dio Node.
Why don’t certain apps play on my Dio Nodes?
The only types of sounds that won’t get transmitted to Dio Node are audio
calls and system sounds. If an app is not transmitting its audio to Dio Node,
that is because the app has classified its sound as an audio call. Apps that
classify sounds as “regular” audio content will automatically stream to Dio
Node when connected to your speakers.
How many Dio Nodes can link together at once?
There is no limit!
Can others in my home also use these speakers?
Yes! Any compatible Apple devices on your Wi-Fi network will be able to
connect to your speakers with no additional steps. Just open the AirPlay
menu on other Apple devices to access the speakers from them.

Can I connect my Dio Nodes to my TV?
Dio Node doesn’t work directly with televisions, but it does work with Apple
TV Gen. 4 (tvOS 11.4) or later. For more information on using Dio with Apple
TV, visit dioconnect.com/how-it-works.
FAQs (Cont.)
11
Does Dio Node work with Mac or Windows computers?
There is limited native functionality on Mac and iTunes on Windows. You
can get a 3rd party app like Airfoil (Mac) or TuneBlade (Windows) to expand
to full functionality. For more information on Mac and Windows
compatibility, visit dioconnect.com/how-it-works.
Can Dio Node work with other speakers?
Dio Node can be used with any other Apple AirPlay 2-enabled speakers,
including brands like Sonos, Bose, Bang & Olufsen, etc. You just need to
select those speakers along with Dio Node from your AirPlay menu. You
can see a list of compatible 3rd party speakers, soundbars, and other audio
accessories at dioconnect.com/compatible-speakers.
Can Dio Node do smart home stuff?
Dio Node has no built-in microphones or voice assistants, but can do some
additional smart home functions if desired. Go to the (Optional) Voice
Assistant & Extra Features section (pg. 6) for more information.

You can request additional support or give feedback by emailing
[e-mail] or going to dioconnect.com/support.
You can also tweet @DioTechnologies for support or feedback.
You can view our return policy and warranty information at
dioconnect.com/legal/terms.
Getting Support
12
Specs & Compatibility
Minimum Requirements
iPhone: iOS 11.4 or later
iPad: iPadOS 13.0 or later
Apple TV: tvOS 11.4 or later
*Mac (limited): 2011 model or later
*Android & other: Not compatible
*Please note: there may be third
party apps to expand functionality
for Mac, Windows, or Android.
Technical Specifications
Connectivity: Wi-Fi 802.11 a/b/g/n.
Wi-Fi Frequency: 2.412-2.483 GHz,
maximum power ≤ 20 dBm (EIRP)
Power: 5V 2A DC input, 5.5mm
barrel connector (no battery).
Accessories: Power adapter
included. 100-240V input. 1.5m (59
in.) cable length.
Stereo Separation: Mono

13
Safety & Regulatory
Important Safety Instructions
1) Read these instructions. Keep these instructions. Heed all warnings.
2) Do not use Dio Node near water or where it might be exposed to
dripping or splashing. Keep away from all sources of liquid. Do not
expose to moisture, dampness, or wet weather, such as rain, snow, or
fog. Do not place any object filled with liquid, such as vases, on top of it.
3) Clean only with a dry cloth. Unplug from power before cleaning.
4) Do not block any ventilation openings. Install in accordance with
manufacturer’s instructions.
5) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
6) Protect the power cord from being walked on or pinched,
particularly at the power adapter, convenience receptacles, and the
point where it exits from Dio Node.
7) Only use attachments/accessories specified by Dio.
8) During operation, speaker vibration could cause Dio Node to move.
Ensure that Dio Node does not fall from its mounting surface. Do not
hang the product by its power cable.
9) Unplug Dio Node during lightning storms or when unused for long
periods of time.
10) Refer all servicing to qualified service personnel. Servicing is
required when Dio Node or the power adapter has been damaged in
any way, such as by liquid spill, rain or moisture exposure, or dropping.
11) Power Dio Node with the included power adapter. Ensure the power
cable is fully inserted into the power adapter before you plug the
adapter into a power outlet.
12) Dio Node has no on/off switch. Dio Node may appear to be off and
disconnected from its power source when it is actually still connected
and in standby. To disconnect it from power, unplug the power
adapter. Make sure the adapter is always easily accessible. When
connecting or disconnecting it, always hold the adapter by its sides. Do
not unplug by pulling the power cable. Keep fingers away from the
metal part of the plug.
13) Dio Node is for indoor use only. Using Dio Node in rooms or climates
with high humidity or high temperatures may damage it.
14) Dio Node may be damaged by improper storage or handling. Be
careful not to drop it when it is being transported.
Regulatory and Legal Information
NOTE: This product has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this product does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of more of
the following measures:
▶Reorient or relocate the receiving antenna.
▶Increase the separation between the equipment and receiver.
▶Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
▶Consult the dealer or an experienced radio/TV technician for
help.
This device complies with FCC and ISED Canada radiation
exposure limits set forth for an uncontrolled environment. This
device should be operated with a minimum separation distance
of 20cm (8 inches) between the equipment and a person’s body.
The transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules and with ISED
Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.

Warning / Avertissement
To reduce the risk of fire or electric shock, do not expose this device to
rain or moisture.
Pour réduire le risque d'incendie ou de choc électrique, n'exposez pas
cet appareil à la pluie ou à l'humidité.
Caution
Changes or modifications not expressly approved by Dio Technologies,
Inc. could void the user’s authority to operate the equipment.
14
Safety & Regulatory (Cont.)
CAN ICES-003(B)/NMB-003(B)
Le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil
doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
Le présent appareil est conforme aux limites d'exposition aux
rayonnements de la FCC et ISED Canada établies pour un environnement
non contrôlé. Cet appareil doit être utilisé avec une distance minimale de
séparation de 20 cm entre l'appareil et le corps d'une personne.
Dio Node requires DC input. AC power adapter is
included with purchase.
For Europe:
Dio Technologies, Inc. declares that this product, model Dio
Node Gen 1, complies with Directives 2014/53/EU, 2009/125/EC,
2011/65/EU, 2014/30/EU, and 2014/35/EU. A copy of the EU
Declaration of Conformity is available at dioconnect.com/compliance/EU.
This symbol indicates that the product may not be treated as
regular household waste. To dispose of the product, please
deliver it to the applicable collection point for the recycling of
electrical and electronic equipment according to local laws and
guidelines. By recycling this product correctly, you will help
conserve natural resources and ensure the protection of human
health and the environment. For more information about recycling this
product, please contact your local city office, your household waste
disposal service, or the retailer where you purchased this product.
The TÜV mark certifies that this product has been
extensively tested for safety and complies with all
national, regional, and international regulations as
well as best practices for ecodesign.
Dio Node has been tested and certified for Wi-Fi
operation. The Wi-Fi CERTIFIED® Logo is a
registered trademark of Wi-Fi Alliance®.
Use of the Works with Apple badge means that an accessory
has been designed to work specifically with the technology
identified in the badge and has been certified by the
developer to meet Apple performance standards.
Some icons in this document were created by Arkinasi from
www.flaticon.com.
Apple, AirPlay, Apple TV, iPad, and iPhone are trademarks of
Apple Inc., registered in the U.S. and other countries.

[This Page Intentionally Left Blank]

Dio Technologies, Inc.
Los Altos, CA 94022
dioconnect.com