dji Snail User manual

DJI SNAIL
Propeller Adapter
V1.0 2016.12
User Guide
使用说明
使用說明
ユーザーガイド
사용자 가이드
Bedienungsanleitung
Guía del usuario
Guide de l’utilisateur

EN
CHS
CHT
JP
KR
DE
ES
FR
Contents
User Guide 2
使用说明 6
使用說明 10
ユーザーガイド 14
사용자가이드 18
Bedienungsanleitung 22
Guía del usuario 27
Guide de l’utilisateur 31

2
EN
Disclaimer and Warning
Thank you for purchasing the DJI™ Snail series
product (hereinafter referred to as “product”).Read this
disclaimer carefully before using this product. By using
this product, you hereby agree to this disclaimer and
signify that you have read it fully. Please install and use
this product in strict accordance with the User Guide.
SZ DJI TECHNOLOGY CO., LTD. and its afliated
companies assume no liability for damage(s) or injuries
incurred directly or indirectly from using, installing or
modifying this product improperly, including but not
limited to using non-designated accessories.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD.
(abbreviated as “DJI”) and its afliated companies.
Names of products, brands, etc., appearing in this
document are trademarks or registered trademarks
of their respective owner companies. This product
and document are copyrighted by DJI with all rights
reserved. No part of this product or document shall
be reproduced in any form without the prior written
consent or authorization of DJI.

3
EN
This disclaimer is produced in various languages.
In the event of divergence among different versions,
the Chinese version shall prevail when the product
in question is purchased in China, and the English
version shall prevail when the product in question is
purchased in any other region.
Introduction
The Snail Propeller Adapter is designed to secure
the Snail 6048-3D Propellers and 5048 Tri-Blade
Propellers on the Snail 2305 Racing Motor.
In the Box
Adapter (Black) ×1 Adapter(Red) ×1 Screws(M2×4)

4
EN
Assembling the Adapters
Tools Required: M2 hex key
Remove the screws securing the Quick-Release
Propeller Adapter on the 2305 Racing Motors, the
spring and the Quick-Release Propeller Adapter if
there is any.
1. Remove the cap on the Snail Propeller Adapter.
2. Align the holes of the black Propeller Adapter
with the holes on the CW motors. Insert the M2×4
screws and tighten to secure. Align the holes of
the red Propeller Adapter with the holes on the
CCW motors. Insert the M2×4 screws and tighten
to secure.

EN
Put the screws in the correct place during
installation and removal.
Ensure that all the three screws are rmly secured.
Specication
Weight (Single One): 2.7g
Thiscontentissubjecttochange.
Download the latest version from
http://www.dji.com/snail
DJIisatrademarkofDJI.
Copyright©2016DJIAllRightsReserved.

6
CHS
免责声明
感谢您购买 DJITM Snail 竞速多旋翼动力系统系列配
件。在使用 Snail 竞速多旋翼动力系统系列配件之前，
请仔细阅读本声明，一旦使用，即被视为对本声明全
部内容的认可和接受。请严格遵守说明安装和使用该
产品。因用户不当使用、安装、改装（包括使用非指
定的 DJI 零配件，如：电机、电调、螺旋桨等）造成
的任何损失，深圳市大疆 TM 创新科技有限公司及其关
联公司将不承担任何责任。
DJI 是深圳市大疆创新科技有限公司及其关联公司的
商标。本文出现的产品名称、品牌等，均为其所属公
司的商标或注册商标。本产品及说明为深圳市大疆创
新科技有限公司版权所有。未经许可，不得以任何形
式复制翻印。
关于不同语言版本的免责声明可能存在的语义差异，
中国以中文版为准，其他地区以英文版为准。

7
CHS
简 介
Snail 普通桨转接件适配于 Snail 6048-3D 桨及 Snail
5048 三叶桨，用于固定适配桨叶于 Snail 2305 竞速
电机上。
物品清单
转接件（黑色）×1转接件（红色）×1螺丝（M2×4）
安 装
安装时请自备适用于桨座固定螺丝（M2×4）的内六
角扳手。
若用户手中的 2305 竞速电机上已安装快拆桨桨座，
则需先行拆下快拆桨桨座：

8
CHS
1. 取下普通桨转接件上的旋帽。
2. 将红色普通桨转接件与 CCW 电机上的安装孔对
齐，黑色普通桨转接件与 CW 电机上的安装孔对齐，
拧紧螺丝进行固定。
拧开 2305 竞速电机上用于固定桨座的螺丝，并取下
原快拆桨桨座及弹簧。