DMP Electronics TCM-01 User manual

English
Installation Instruction
UNPACKING INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
                

               
                
         
      
               
           
                 
               
      
              
         

         
  
5kg/11lbs 75x75 100x100
VESA
kg


Supplied Parts List

  
       
 
  
 
    
   


This Thin Client Mount can be installed as following three methods.
4
 
7
 
9
 

Install with VESA mount

Attach Rubber Pads as shown.
Step 1
Attach Bracket B shown to a VESA mount.
Step 2
4x 2x
4x
4x


:          
      
 

4x
4x
4x


 

Attach Bracket A to a monitor.
Step 3
Attach Plastic Knobs.
Step 4 Attach Thin Client.Step 5
2x
Install with VESA mount
:         
 


Secure Thin Client.
a.   b.   
c.  
Step 6
If you are using the strap and buckle, clip buckele together and
tighten strap.
Step 7
  
Install with VESA mount

4x
2x
Install on 35-42mm pole

Attach Rubber Pads as shown.
a & b1.       
a & b2.       
Step 1
a.         
b.   
Step 2
35-38mm 40-42mm

  

35-38mm 40-42mm

2x


a.     
  
b.  
c.   
d.  
Step 3
If you want to use the optional strap and buckle.
a.           
 
b.  
Step 4

 
  
Install on 35-42mm pole

Attach Rubber Pads as shown.
4x 2x
Install under desktop

Step 1
Attach Bracket A as shown.
Step 2


:      
    
     

Attach Bracket B.

Step 3
Attach Thin Client.
Step 4
2x
Install under desktop

a.  
b.   
c.  
a.             
b.  
Secure Thin Client.

Step 5
If you are using the optional strap and buckle:
Step 6



 
Install under desktop