Dock Doctors Wall-Mounted Storage Rack User manual

Toll Free: 1-800-870-6756 | [e-mail] | www.thedockdoctors.com
Dock Doctors
The
®
LLC
1
© 2016 The Dock Doctors - V0416
A
B
C
D
E
F
G
The wall brackets of your storage rack need to be
mounted to a stud, header or other secure material.
NOTE: You will need 8 fasteners (not included) for
attaching the wall brackets to your wall. The length
and style of these will vary based on your mounting
surface and location.
The fasteners you provide cannot be raised above
the channel in the bracket once installed into your
surface.
MOUNTING your storage rack
WALL BRACKET
Wall-Mounted Storage Rack
Assembly Instructions
RACK COMPONENTS
PART NAME QTY
A. WALL BRACKET ...................4
B. UPRIGHT BAR (80”) .............2
C. UPRIGHT BAR END CAP .......4
D. ARM BRACKET .....................6
E. ARM (35”)............................6
F. ARM HULL GUARD (34”) ......6
G. ARM END CAP......................6

Toll Free: 1-800-870-6756 | [e-mail] | www.thedockdoctors.com
Dock Doctors
The
®
LLC
2
© 2016 The Dock Doctors - V0416
ALLEN BOLT
BRASS NUT
EYE BOLT
ALLEN WRENCH
ARM END CAP*
UPRIGHT BAR END CAP*
HULL GUARD*
NOTE: You will need 8 fasteners (not included)
for attaching the wall brackets to your wall.
The length and style of these will vary based
on your mounting surface and location.
The fasteners cannot be raised above the
channel once installed into your surface.
*Items are not to scale.
WALL BRACKET*
Wall-Mounted Storage Rack: Assembly Instructions
RACK COMPONENTS
PART NAME QTY
A. WALL BRACKET ........................ 4
B. UPRIGHT BAR (80”) .................. 2
C. UPRIGHT BAR END CAP ............ 4
D. ARM BRACKET .......................... 6
E. ARM (35”)................................. 6
F. ARM HULL GUARD (34”) ........... 6
G. ARM END CAP........................... 6
HARDWARE
PART NAME QTY
ALLEN BOLT ................................... 10
EYE BOLT ........................................ 6
BRASS NUT .................................... 16
ALLEN WRENCH .............................. 1
ADDITIONAL ARMS
if you ordered additional arms for a custom
conguration, each arm will have (1) eye bolt,
(1) allen bolt & (2) brass nuts.

Toll Free: 1-800-870-6756 | [e-mail] | www.thedockdoctors.com
Dock Doctors
The
®
LLC
3
© 2016 The Dock Doctors - V0416
Step 1: Pre-assemble hardware ARM BRACKETS:
Assembly of your rack will be easier if you install hardware onto
some of the components before assembling them onto the rack.
Install (1) allen bolt, (1) eye bolt and (2) brass nuts onto each of the (6) arm brackets.
Loosely install the allen and eye bolts onto the arm brackets (do not tighten them).
NOTE: You will have “left” and “right” arm brackets. When assembled, the allen and
eye bolts will face the inside of the rack when installed onto the rack (see Figure A).
left side arm
right side arm
ALLEN BOLT
BRASS NUT
EYE BOLT
channel
for brass
nut
channel
for brass
nut
allen
bolt
eye bolt
ARM BRACKET
To install the allen and eye bolts, hold the
arm bracket horizontally or place it on a
at surface. Slide (1) brass nut into the
channel. Use the included allen wrench to
slide the nut into place. Loosely thread the
allen bolt or eye bolt onto the brass nut.
ASSEMBLY TIP
Step 1
Parts Needed Quantity
Arm Brackets 6
Eye Bolts 6
Allen Bolts 6
Brass Nuts 12
Wall-Mounted Storage Rack: Assembly Instructions
A

Toll Free: 1-800-870-6756 | [e-mail] | www.thedockdoctors.com
Dock Doctors
The
®
LLC
4
© 2016 The Dock Doctors - V0416
Step 2: Pre-assemble hardware onto WALL Brackets:
Install (1) allen bolt and (1) brass nuts onto each of the (4) wall brackets.
Loosely install the allen bolts (do not tighten them).
ALLEN BOLT
BRASS NUT
channel for
brass nut
WALL BRACKET
allen bolt
channel for
brass nut
holes for
mounting to
wall
To install the allen and eye bolts, hold the
arm bracket horizontally or place it on a
at surface. Slide (1) brass nut into the
channel. Use the included allen wrench to
slide the nut into place. Loosely thread the
allen bolt or eye bolt onto the brass nut.
ASSEMBLY TIP NOTE: The fasteners you provide cannot
be raised above the channel once
installed into your surface.
Wall-Mounted Storage Rack: Assembly Instructions
Step 2
Parts Needed Quantity
Wall Brackets 4
Allen Bolts 4
Brass Nuts 4

Toll Free: 1-800-870-6756 | [e-mail] | www.thedockdoctors.com
Dock Doctors
The
®
LLC
5
© 2016 The Dock Doctors - V0416
Step 2: Measure and Attach Upper Wall Brackets
NOTE: The wall brackets of your storage rack need to be mounted to a
stud, header or other secure material.
The distance between the top and bottom brackets should be a
maximum of 80.5” (see Figure B). The distance between the top
brackets can vary based on the width you need for your storage needs
and the locations of studs or headers in your mounting surface.
Mount the TOP BRACKETS to the wall in the position desired using the
appropriate fasteners (not supplied) for your surface.
Make sure the fastener is not raised above the channel once
installed into your surface. (Note: Do not mount the bottom
brackets yet, you will mount them in Step 4).
Width varies based on your storage needs
Maximum mounting
distance from top to
bottom bracket is 80.5”
Measure from
center of top hole
on top bracket...
...to center of
bottom hole on
bottom bracket
80.5” or less
WALL BRACKET
WALL BRACKET
80.5” or less
* You will need 8 fasteners (not
included) for attaching the wall
brackets. You will use (4) four in Step 2,
and (4) four in Step 4. The length and
style of these will vary based on your
mounting surface and location.
B
Wall-Mounted Storage Rack: Assembly Instructions
Step 2
Parts Needed Quantity
Wall Brackets 2
Fasteners* 4
(you provide)

Toll Free: 1-800-870-6756 | [e-mail] | www.thedockdoctors.com
Dock Doctors
The
®
LLC
6
© 2016 The Dock Doctors - V0416
Wall-Mounted Storage Rack: Assembly Instructions
STEP 3: Attach Upright Bars to Upper Wall Brackets
Take (1) upright bar and slide it into one of the top brackets that you mounted
in Step 2 (see Figure C).
Slide the bar about 6 inches above the top bracket (see Figure D), then hand-
tighten the allen bolt on the wall bracket to hold the upright bar in place.
Repeat with the other upright bar.
upright bar
wall bracket
Slide upright bar about
6” above wall bracket
- this will allow you to
install lower bracket in
the proper position in
Step 4.
wall bracket
Step 3
Parts Needed Quantity
Upright Bar 2
C D

Toll Free: 1-800-870-6756 | [e-mail] | www.thedockdoctors.com
Dock Doctors
The
®
LLC
7
© 2016 The Dock Doctors - V0416
Wall-Mounted Storage Rack: Assembly Instructions
STEP 4: Attach Lower Wall Brackets
Align and mark the BOTTOM WALL BRACKETS, making sure they are no
more than 80.5” below the top brackets (see Figure E).
Mount the BOTTOM WALL BRACKETS to the wall in the position
desired using your supplied fasteners.
Maximum mounting
distance from top to
bottom bracket is 80.5”
Measure from
center of top hole
on top bracket...
...to center of
bottom hole on
bottom bracket
80.5” or less
Step 4
Parts Needed Quantity
Wall Brackets 2
Fasteners 4
(you provide)
E

Toll Free: 1-800-870-6756 | [e-mail] | www.thedockdoctors.com
Dock Doctors
The
®
LLC
8
© 2016 The Dock Doctors - V0416
Wall-Mounted Storage Rack: Assembly Instructions
STEP 5: Attach Arm Brackets
Take (3) arm brackets and slide them onto the upright bar from the
bottom (see Figure F).
Position them in the approximate positions shown below. Once
positioned, hand-tighten the allen bolts on the side of the arm brackets
to secure them to the upright bar.
18”
22”
22”
ARM BRACKET
LOWER WALL
BRACKET
Step 5
Parts Needed Quantity
Arm Brackets 6
F

Toll Free: 1-800-870-6756 | [e-mail] | www.thedockdoctors.com
Dock Doctors
The
®
LLC
9
© 2016 The Dock Doctors - V0416
Wall-Mounted Storage Rack: Assembly Instructions
STEP 6: Upright Bar into Lower Wall Bracket
6.1: Loosen the allen bolt on either top wall bracket, then slide the upright bar
(with arm brackets in position) into the lower bracket.
6.2: Hand-tighten the allen bolts on the upper and lower wall brackets to secure
the upright bar in place.
6.3: Repeat Steps 6.1 and 6.2 with the other upright bar.
STEP 7: Attach End Caps
Take (4) upright bar end caps and place them on the top and
bottom of each upright bar.
UPRIGHT BAR
END CAP
UPRIGHT BAR
END CAP
TOP WALL
BRACKET
BOTTOM WALL
BRACKET
Step 6
Parts Needed Quantity
Upright Bar End Caps 4
UPRIGHT BAR END CAP

Toll Free: 1-800-870-6756 | [e-mail] | www.thedockdoctors.com
Dock Doctors
The
®
LLC
10
© 2016 The Dock Doctors - V0416
Wall-Mounted Storage Rack: Assembly Instructions
HULL GUARD
END CAP
with tie-down opening
STEP 8: Install Arms, Hull Guards & Arm End Caps
NOTE: Depending upon the type of crafts you will store on the rack,
you may want to adjust the position of the arms.
Install (6) arms into the arm brackets on each upright bar. Hand-tighten the
allen bolts to secure the arm to the arm bracket.
Install hull guards and end caps onto each arm (see Figure G).
STEP 9: Tighten All Bolts
Once you have all the components assembled and the arms
spaced for your conguration, tighten all allen bolts and eye
bolts with the provided allen wrench to complete the assembly
and secure your rack.
Step 8
Parts Needed Quantity
Arms 6
Hull Guards 6
Arm End Caps 6
G