domi outdoor living LGCF1551 User manual

[e-mail]
2019-2023 Domi Outdoor Living LLC. All Rights Reserved.

Step 1:Use 6 screws 9#, gaskets and caps to
connect 2 part H2 with part #C/J1/C1 as shown
in ① to form a front side wall panel.
Step 2: Place the assembled front side wall
panel (C/J1/C1) on the bottom frame(A1),
using 5 screws 1# and gaskets to fix.

Side View
X2
X4

Step 1: Place part #J1/C/J on the bottom frame
(A6/A4), using 7 screws 1# and gaskets to fix.
Step 2: Use 2 screws 9# and gaskets to install 2
part#（H5+H6）with part#C & J1, then put on the
plastic caps as shown in ①.
Step 3: Use 2 screws 9# and gaskets to install 2 part#（H5+H6）with part#J1 & C, then put on
the plastic caps as shown in ③.
Step 4: Use 4 screws 9# and gaskets to install 2 part#（H5+H6）with 2 part#J, then put on the
plastic caps as shown in ⑤.
Repeat the above procedures to assemble the another side as shown in ②④⑤.
Step 5: Use 2 screws 9# and gaskets to installe 2
part#（H4+H3）with part#C & J, then put on the
plastic caps as shown in ③.
Step 6: Use 2 screws 9# and gaskets to installe
2 part#（H4+H3）with part#J & C, then put on the
plastic caps as shown in ④.

Step 1: Use 7 screws 1# and gaskets to fix 2 part#J on the bottom frame(A5 & A6).
Step 2: Use 6 screws 9# and gaskets to fix 2 part#J with 2 part#(H5+H6), then put on the
plastic caps to form a whole side wall as shown in ①②.
Repeat the above procedures to assemble another side wall.
Step 3: Use 13 screws 1# and gaskets to fix 4 part#J on the bottom frame(A4 & A3).
Step 4: Use 10 screws 9# and gaskets to fix 4 part#J with 2 part#(H3+H4), then put on the
plastic caps to form a whole back wall as shown in ①②.

Step1: Connect part #B1 and part #B2, insert part #B7 & B8 on the inside of
part #B1/B2 with 6 screws 12# and gaskets as shown in ①.
Step2: Connect part #B3 and part #B4, insert part #B7 on the inside of part #B3/B4
with 6 screws 12# and gaskets as shown in ②.
Step3: Connect part #B5 and part #B6, insert part #B7 on the inside of part #B5/B6
with 6 screws 12# and gaskets as shown in ③.
Repeat the above procedures to assemble another top beam.

①
②
Enclose with part #B5/B3, part #B4/B6, part #B5/B2, part #B1/B6, according to the figure
above, and the part#B connects the four corners, then fixed with 16 screws 12# and gaskets
as shown in ①②.
Fix 2 part #C4 on part #B1, part #B2 by 4 screws 9#, gaskets as shown in ③④.
You can also install the top frame on each wall separately.
!

Place the assembled beam (B1,B2, B3,B4,B5,B6)
on the upper end of the wall panel, and f ix with
59 screws 1# and gaskets as shown in ①②.
Fix the upper end of the part #C1/C2 with
part #B1 and part#C4 by using screws 3#, the
nuts and gaskets are on the back side as shown
in ③④.in ③④.

Assemble the part#G2 to the one side of part#K4 with 4 screws 2# gaskets and nuts.
Assemble the part#G1 to the one side of part#K1 with 4 screws 2# gaskets and nuts.

The roof panel K1/K4 is fixed with top frame
D1/D2 by using screws 2#,gaskets and nuts
as shown in ③,then fix with screw 1#
and gaskets to side top beam as shown
in ④.
D1 D2