Dorel Asia WM3342TY User manual

BAKER'S RACK
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
LOT NUMBER:
(TAKEN FROM CARTON)
MODEL NO: WM3342TY
DATE OF PURCHASE:
0-65857-15049-0
NOTE:
DOREL ASIA
UPC CODE:
_______ / _______ / _______
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSIS
1-800-295-1980
DO NOT RETURN PRODU
E-MAIL:DAS@DORE

* Ensure all parts and components are present before beginning assembly.
* Assemble on soft, smooth surface to prevent damage to product finish.
* DO NOT use power tools.
* CAUTION: Adult assembly required.
* Assembly may require two people.
* Estimated assembly time: 20 minutes.
Dust this item regularly with a soft, lint-free cloth to prevent soil build up. Wipe away spills
immediately to prevent staining using a clean cloth dampened with water. Do not use liquid or
abrasive cleaners on the metal frame as this may damage the finish.
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
NOTES
WARNING: Should this product
become damaged, and/or components are
broken or missing, DO NOT USE.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
DOREL ASIA LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This warranty
is valid only upon presentation of proof of purchase. This is solely limited to the repair or replacement
of defective furniture components and no assembly labor is included. This warranty does not apply to
any product which has been improperly assembled, subjected to misuse or abuse or which has been
altered or repaired in any way. This warranty gives you specific legal rights and you may also have
other rights which vary from State to State
CARE AND CLEANING
CUSTOMER SERVICE
If you are missing parts, like the feet or washers, or have any questions about this product, contact our
customer service representative first! CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100

HARDWARE LIST
PARTS LIST
TOP BACK FRAME
CROSS
1 PC
SMALL SHELF-
2 PCS
TOP SIDE FRAME
2 PCS
H
J
RIGHT FRONT
LEG-1 PC
LARGE LOWER
SHELF-2 PCS
Φ3/16"×3/8"Lg.
HEX SOCKET HEAD BOLT
26 PCS
Φ3/16"×1"Lg.
HEX SOCKET HEAD BOLT
14 PCS
G
F
I
LARGE TOP
SHELF-1 PC
POST
2 PCS
ALLEN WRENCH
1PC
E
B
A
LEFT FRONT LEG
1 PC
BOTTOM BACK
FRAME-1 PC
TOP BACK
FRAME- 1 PC
D
C
WM3342TY
BAKER'S RACK
3
2
1
FIGURE 15
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
- 2 -

BAKER'S RACK
FIGURE 15
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
STEP 1
Attach left front leg (E) and right front leg (F) to large top shelf (D) with hex socket head bolts
(1). Use Allen Wrench (3) to tighten bolts.
Note: Do not fully tighten bolts (1). Leaving the bolts loose will facilitate assembly in the
following steps.
E
3
1
- 3 -
WM3342TY

BAKER'S RACK
A
FIGURE 15
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
STEP 2
Insert posts (C) into the corners of bottom back frame (A).
NOTE- One of the holes in posts (C) is larger than the others. Posts (C) must be positioned as
shown in Photo 1 for proper assembly.
Secure posts (C) to bottom back frame (A) using hex socket head bolts (1) (refer to Photo 2).
Attach large top shelf (D) to bottom back frame (A) using hex socket head bolts (2) as shown. Use
Allen Wrench (3) to tighten bolts. (Photo 3)
Note: Do not fully tighten bolts. Leaving the bolts loose will facilitate assembly in the following
steps.
3
2
1
C
C
BACK VIEW BACK VIEW
BACK VIEW
Larger hole
D
PHOTO 1
PHOTO 2
PHOTO 3
A
A
- 4 -
C
WM3342TY

BAKER'S RACK
STEP 3:
Attach large lower shelves (G) to front legs (E & F) & bottom back frame (A) with hex
socket head bolts (1 & 2). Use Allen Wrench (3) to tighten bolts. Start by attaching one
large lower shelf (G) in the middle, and then the remaining large lower shelf (G) on the
bottom.
Note: Do not fully tighten bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
FIGURE 15
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
3
2
1
E
E
E
Attach middle shelf
first.
- 5-
WM3342TY

BAKER'S RACK
FIGURE 15
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
STEP 4
Insert top back frame (B) through posts (C) to bottom back frame (A). Secure with hex
socket head bolts (1). Use Allen Wrench (3) to tighten bolts.
Note: Do not fully tighten bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
3
1
- 6 -
WM3342TY

BAKER'S RACK
FIGURE 15
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
STEP 5
Attach top side frames (H) to top back frame (B) and large top shelf (D) with hex socket
head bolts (2). Use Allen Wrench (3) to tighten bolts
Note: Do not fully tighten bolts. Leaving the bolts loose will facilitate assembly in the
following steps.
3
2
- 7 -
WM3342TY

BAKER'S RACK
FIGURE 15
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
STEP 6
Attach top back frame cross (J) to top back frame (B) with hex socket head bolts (1).
Attach small shelves (I) to top back frame (B) and top side frames (H) with hex socket head
bolts (1&2) as shown. Use Allen Wrench (3) to tighten bolts.
Note: Fully tighten all bolts previously installed with Allen Wrench (3)
3
2
1
FRONT VIEW
BACK VIEW
- 8 -
WM3342TY

BAKER'S RACK
FIGURE 15
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Step 12
Step 13
Step 14
Step 15
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
CAUTION: This unit is intended for use only with the
products and maximum weights indicated. Use with other
products or products heavier than the maximum weights indicated
may result in instability or causing possible injury.
Maximum Weight per
small shelf- 10 lbs
Maximum Weight per
large shelf- 15 lbs
- 9 -
WM3342TY

MODEL #: WM3342TY
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity: (Please be sure to list model number or SKN number)
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Customer Service Phone Number 1-800-295-1980
Email: [email protected]
Customer Service Fax Number 514-353-7819