Eurostand Display iPad Post Mount User manual

iPad Post Mount
Assembly Instructions

1
Carefully remove iPad components
from carton.
2
Align central threaded hole of interface bracket with offset hole in
enclosure back. Insert screw through iPad enclosure and fully tighten to secure.
iPad Post Mount

3
Unlock the iPad enclosure by inserting key into security lock and rotate ‘QUARTER TURN ONLY’ clockwise or counter-clockwise through 90 degrees which
releases the locking pin. Return key back to original position to remove. Lift fascia out of enclosure and place iPad inside, gently pressing all four corners
down into mouldings to hold. Replace fascia and depress lock button to secure enclosure.

4
Locate bracket clamp grooves
into selected channel of 8-way post.
5
Adjust and tighten 4 screws at side of interface bracket until securely
clamped to post at required height.
iPad Post Mount
2018 rA