Dormakaba Alvarado SW1000 Owner's manual

Alvarado Manufacturing Company, Inc.
12660 Colony Street, Chino, CA 91710
Phone: [phone]
Fax: [phone]
[email protected]
www.alvaradomfg.com
PUD3448R3-0
SW1000/SW1000T
Motorized Pedestrian Security Gate
Installation and Operation Instructions

SW1000 Installation and Operation Instructions
Page 2 For Assistance: [email protected] [phone] PUD3448R3-0
Contents. ......................................................................................................................................................................... 2
Safety Precautions. ......................................................................................................................................................... 4
Safety Icons..................................................................................................................................................................... 4
Introduction...................................................................................................................................................................... 5
Purpose of this Manual. ............................................................................................................................................ 5
Intended Users.......................................................................................................................................................... 5
User Responsibilities. ............................................................................................................................................... 5
SW1000 Overview. .......................................................................................................................................................... 6
External Components. .............................................................................................................................................. 6
Internal Components................................................................................................................................................. 7
SW1000 Functionality. .............................................................................................................................................. 9
Installation Tools. ........................................................................................................................................................... 10
Parts List........................................................................................................................................................................ 10
Pre-Installation................................................................................................................................................................11
Conduit Requirements. ........................................................................................................................................... 12
Electrical Requirements. ......................................................................................................................................... 12
Environmental Requirements.................................................................................................................................. 13
Communication Requirements................................................................................................................................ 13
Gate Orientation...................................................................................................................................................... 13
Opening the Boxes. .................................................................................................................................................... 14
Pre-Installation Checklist. ....................................................................................................................................... 14
Installation Instructions.................................................................................................................................................. 15
Base Installation...................................................................................................................................................... 15
Tower Assembly Installation.................................................................................................................................... 16
Primary Power Wiring.................................................................................................................................................... 18
Access Control Wiring. .................................................................................................................................................. 19
Open Entry. ............................................................................................................................................................. 20
Open Exit. ............................................................................................................................................................... 20
Barrier Hold Open. .................................................................................................................................................. 21
Emergency Override. .............................................................................................................................................. 21
Emergency Override State Select........................................................................................................................... 22
Breakaway Alarm Output. ....................................................................................................................................... 22
Complete Installation..................................................................................................................................................... 23
Lid Installation. ........................................................................................................................................................ 23
Barrier Installation. .................................................................................................................................................. 24
Post-Installation Functions Check. ................................................................................................................................ 25
Powering On / Off.................................................................................................................................................... 25
Testing Lane Functionality....................................................................................................................................... 25
User Instructions. .................................................................................................................................................... 27
SW1000 Conguration. ................................................................................................................................................. 29
Connecting to the SW1000. .................................................................................................................................... 29
Using SwingGate Utility........................................................................................................................................... 30
Setting the Gate Closed Position (Home Position) Using the Utility. ...................................................................... 32
Maintenance.................................................................................................................................................................. 33
Options.................................................................................................................................................................... 34
Contents

SW1000 Installation and Operation Instructions
PUD3448R3-0 For Assistance: [email protected] [phone] Page 3
Appendix A - SW1000T Tandem Gate Instructions. ...................................................................................................... 35
Installation Tools...................................................................................................................................................... 35
Parts List. ................................................................................................................................................................ 35
Space Requirements. ............................................................................................................................................. 35
Conduit Requirements. ........................................................................................................................................... 36
DC Power Crossover Cable.................................................................................................................................... 37
Communication Crossover Cable. .......................................................................................................................... 38
Appendix B - Free-Egress Option.................................................................................................................................. 39
Considerations. ....................................................................................................................................................... 39
Activation Area. ....................................................................................................................................................... 40
Functions Test . ....................................................................................................................................................... 41
Appendix C - Setting the Home Position Manually. ....................................................................................................... 42
Appendix D - Portable Baseplate Installation. ............................................................................................................... 43
Troubleshooting............................................................................................................................................................. 45
Revision History............................................................................................................................................................. 46
Contents (Cont.)

SW1000 Installation and Operation Instructions
Page 4 For Assistance: [email protected] [phone] PUD3448R3-0
The following symbols are used throughout the manual to highlight important information and potential risks when
installing, servicing, or using the gates.
This symbol is used in this manual to warn installers and operators of potential harm. Please
read these instructions very carefully.
This symbol is used in this manual to designate potential conditions that may pose a risk to
pedestrians, personnel, property and equipment. Please read these instructions very carefully.
NOTE This symbol is used in this manual to designate useful information for the installer and operator.
Please read these instructions.
For questions, please contact Alvarado at [phone], Monday – Friday 7:00am to 4:00pm
PST. Please read this manual completely before installing or operating the purchased product.
Safety Icons
The SW1000 may present a risk to persons and property if it is not installed and/or operated
correctly. Therefore, this manual must be read in its entirety and all safety and operations
information must be followed. Note the following precautions:
• For indoor use only.
• Use only skilled individuals to install and service the gate.
• DO NOT operate the gate if it has been damaged in any manner. If damaged, have the unit repaired or
adjusted by a skilled service person before use.
• DO NOT modify or alter the gate.
• Have skilled individuals maintain the gate according to a proper maintenance schedule.
• In access control applications, train all personnel that will be using the gate in the proper method of operation.
In addition, properly train new users as they are added to the system.
• DO NOT use non-Alvarado parts to repair a damaged gate.
• Power off the gate before connecting or disconnecting any communication or power wiring to the gate.
• The product has a motorized barrier that opens and closes. Pedestrian trafc patterns must be considered
when determining installation location. Do not install this product in a location where cross trafc could bring
pedestrians within 3 feet of the gate.
Safety Precautions
CAUTION
WARNING
WARNING

SW1000 Installation and Operation Instructions
PUD3448R3-0 For Assistance: [email protected] [phone] Page 5
Introduction
This manual is intended for use by system integrators, facility operators, and owners responsible for installation of the
product, the facility access system, and the employees, vendors, and invitees that will use the equipment on a
day-to-day basis.
As owner or caretaker of the equipment, it is essential that you maintain your SW1000s and ensure safe product use
by the employees, vendors, and invitees that will be utilizing the product.
Refer to the Maintenance section of this manual for instructions on the proper maintenance of the product.
Intended Users
User Responsibilities
This manual covers physical installation, operation, conguration, and maintenance instructions for SW1000 Motorized
Pedestrian Security Gates. Please read this manual in its entirety before beginning installation.
Purpose of this Manual

SW1000 Installation and Operation Instructions
Page 6 For Assistance: [email protected] [phone] PUD3448R3-0
SW1000 Overview
The SW1000 is a motorized pedestrian gate that provides single direction or bi-directional access control. In the closed
or "home" position, the barrier is held in place by motor force. Upon receipt of a dry contact input from an access
control system or input device such as a push button, the motorized barrier opens 90 degrees away from the signal
direction.
The SW1000 is an ideal product to provide disabled or delivery access in conjunction with Alvarado's waist high or
optical turnstiles.
E
A
B
C
D
F
G
External Components
H
SW1000 - Exterior ViewSW1000 - Exterior View
Figure 1
Lid
Upper Cover
Barrier Clamps
Lower Cover
Power Button
Access Panel
Barrier Plates
Barrier
Base Plate
A
B
C
D
E
F
G
H
I
I

SW1000 Installation and Operation Instructions
PUD3448R3-0 For Assistance: [email protected] [phone] Page 7
Internal Components
SW1000 TowerSW1000 Tower
SW1000 / SW1000T - Interior ViewSW1000 / SW1000T - Interior View
Figure 2
I
J
K
L
M
N
O
I
J
K
L
M
N
O
SW1000T TowerSW1000T Tower

SW1000 Installation and Operation Instructions
Page 8 For Assistance: [email protected] [phone] PUD3448R3-0
O
I
J
K
M
L
N
Internal Components (cont.)
Digital Position Encoder -
The digital position encoder continually monitors the position of the barrier and works in conjunction with the
Motor and I/O - Motor Control Board to control barrier movement.
Motor -
The 24VDC brushless motor / planetary gearbox assembly moves the barrier.
Power Rectier Board -
This board receives 24VDC from the power supply and steps it down to 5VDC and 12VDC for
additional low-voltage requirements.
I/O - Motor Control Board -
This board serves as the interface point for the gate I/O signals and serves as the controller for the
motor operation and barrier movement.
Power Supply -
The power supply converts primary power to 24VDC low-voltage power for motor operation.
Communication Terminal Block (TB2) -
When wired as a tandem gate, the Secondary gate uses this terminal block to connect power and
communications crossover cables.
Conguration Terminal Block (TB1) -
This terminal block contans all available input & output connections.

SW1000 Installation and Operation Instructions
PUD3448R3-0 For Assistance: [email protected] [phone] Page 9
A summary of SW1000 functionality is presented below.
Barrier Breakaway
The SW1000 utilizes motor force to provide resistance against a user pushing or pulling the barrier open. When the
barrier is forced, an alarm sounds and the barrier "breaks away" allowing the barrier to move freely. An output is
generated from the Communication Terminal block - TB2 for monitoring purposes. After a dened time (4 seconds
is the default), the gate resets and resumes normal operation. The force it takes to push or pull the barrier open is
congurable using SwingGate Utility.
Barrier Impact
Should the barrier encounter an obstruction while opening or closing, the barrier will stop moving and an alarm will
sound. After a dened period, the barrier resets and the gate resumes normal operation.
Fire Alarm / Emergency Override
Activation to open the gate in conjunction with a re alarm / emergency override signal is achieved by supplying a
sustained dry contact signal to the appropriate input on the Conguration Terminal block - TB1. When the input signal
is received, the gate opens in the exit direction and remains open until the input signal is removed. When the input
signal is removed, the gate resumes normal operation.
The SW1000 default conguration for re alarm / emergency override input signals is normally open, but can be
congured to interface with normally closed input signals using the Conguration Terminal block - TB1.
Power Failure
When power is removed from the unit, the SW1000 barrier moves freely in either direction. When pushed or pulled to
the open position, the barrier remains open. When power is restored, the gate resumes normal operation.
Barrier Cycle
Barrier cycle refers to the period of time it takes for the barrier to open or close. Barrier open and close settings can
be dened using the SwingGate Utility.
Dwell Time
Dwell time refers to the period of time the barrier remains in the open position (allowing a user to pass through the
gate) before returning to the closed position. Dwell time can be congured using SwingGate Utility.
Barrier Hold Open
After an Open Entry or Open Exit activation, the gate is held open indenitely using an integrated toggle switch (not
supplied by Alvarado). When the toggle is released, the barrier returns to the home position. Typically, this is used to
allow delivery personnel or a group of visitors entry/exit to the facility without credentials.
Security Alarm
The Security Alarm sounds when the barrier is pushed or pulled beyond the user-dened position. The Security Alarm
position can be congured using SwingGate Utility.
SW1000 Functionality

SW1000 Installation and Operation Instructions
Page 10 For Assistance: [email protected] [phone] PUD3448R3-0
Installation Tools
• Hammer Drill
• 5/8" Concrete Drill Bit
• Pencil
• Shop Vac
• Straight Edge Level
• Rubber Mallet
• Torque Wrench (in-lbs.)
• Torque Wrench (ft-lbs.)
• 9/16" Socket
• Fish Tape
• #2 Phillips Head Screwdriver
• Clear RTV Silicone
• Hex Wrenches:
3/32", 5/32", 5/64", 1/4"
This tower is shipped partially assembled. Only the barrier needs to be installed once the tower is anchored in the
desired location. Make sure that none of these parts are missing and/or damaged before beginning installation. If parts
are missing and/or damaged, please contact Alvarado Technical Support at [phone].
Also Included:
Parts List
• (4) Concrete Anchor Package (Qty 1)
• Barrier Clamp Screws (Qty 4)
• Barrier Plate Screws (Qty 4)
• Top Cover Screws (Qty 3)
• Access Panel Screws (Qty 4)
• SW1000 Utility USB (Qty 1)
Base Plate
(Qty 1)
Access Panel
(Qty 1) Barrier Clamp
(Qty 2)
Barrier Plate
(Qty 2)
Lid
(Qty 1)
Tower Assembly
(Qty 1)
Barrier
(Qty 1)
Lower Cover
(Qty 1)
Upper Cover
(Qty 1)
Refer to Appendix A for information and instructions
speci c to SW1000T tandem gate installations.
NOTE