DOSHISHA DCI-20DM User manual

please use home freezer
MAX
How to use 1
Parts Name
How to use 2
Preparation
Thoroughly wash all parts other
than the insulated container,
wipe o any water droplets and
dry thoroughly.
1.
※Toremovedirtfromtheinsulatedcontainer,
wringoutawetclothandgentlywipethesurface.
Slowly place the combined
ice molds into the water
reservoir.
4.
※Watermayspillwhenthecombinedice
moldsareplacedintothewaterreservoir.
Freeze the ice-making unit in
the freezer for at least 20 hours.
7.
※Theice-makingtimevariesdependingontheseason,
ambientconditions,frequencyoffreezeraccess,
freezermodelandthestoragecapacity.
Pour water up to the MAX line
of the water reservoir.
2.
Caution
Caution
Preparation
Use a freezer with a JIS rating of at least three stars (
Set the temperature dial of the freezer to "Strong" (-18 °C or cooler).
).
・


Air vent holes
freezer
Before use
Before using for the rst time, check that there are no defects such
as scratches, dents, or cracks.
Do not remove the sticker on the water reservoir.
Before using for the rst time, wash all parts other than the insulated
container with a sponge soaked in dishwashing detergent.
Insulated containers may lose color when detergent is applied.
In the event of a defect, discontinue use and contact your retailer or
our customer service oce.
•
•
•
•
Air vent holes
Extraction tabs
MAX line
DCI-20DM
DCI-20DM
DCI-20HT
DCI-20DM
DCI-20HTDCI-20HT
Ice molds
Water reservoir
Insulated container
3 42 Continuedonthereverseside
←110 ｍｍ→ ←110 ｍｍ→ ←109 ｍｍ→
Ice-
making
unit
Ice-
making
unit
Pour water in an area that is not prone to
water damage.
If the water is not lled to the MAX line,
the ice may not be a perfect shape.
Do not ll with any liquid other than water.
• 
• 
• 
Water may spray out of the air vents if
the molds are moved too forcefully.
Push them down until they are rmly
in place.
Water will spill from the water reservoir.
As it does so, the corners of the ice
molds will ll with water to ensure that
a complete 3D shape is formed.
Before performing this step, place the
molds on a tray to collect any water that
spills from the water reservoir.
• 
• 
Combine the 2 ice molds.3.
Caution
Ensure that the molds are securely
attached to one another.
• 
Wipe the outside of the water
reservoir before placing it into
the insulated container.
5.
Caution
Place the water reservoir on a at surface.
Wipe the outside of the wet water reservoir
thoroughly before placing it into the insulated
container. Push it down until it is rmly in place.
• 
• 
Place the ice-making unit in
the freezer. Place it slowly so
that water does not spill.
6.
Caution
Place on a at surface. Failure to do so
may cause water to spill.
If the insulated container is wet, wipe it
with a dry cloth before placing it in the
freezer, otherwise it may stick to the freezer
and cause damage.
Do not place any items on this product,
otherwise it may become deformed.
Carry the ice-making unit by the insulated
container, otherwise the insulated
container may fall to the ground.
• 
Do not use a two-star ( ) freezer.• 
Even if it’s a three-star freezer (
approximately 10 years of use. If you are using an older freezer, extend the freezing
time accordingly.
Do not place the ice-making unit near the freezer entrance. Open and close the freezer
as infrequently as possible, otherwise warm air may ow in and the freezer will not freeze
properly.
Do not place the product next to food which is still warm, as this may prevent the ice from
forming.
) freezer performance drops signicantly after• 
• 
• 
• 
• 
• 

How to use 3
DCI-20DM/DCI-20HT
Clear Ice Maker
User Manual
Thankyouforpurchasingthisproduct.Thisproductisdesignedforhomeuse.Pleaseread
thisinstructionmanualcarefullybeforefirstusetoensureproperoperationandkeepitina
safeplaceforfuturereference.
Unloading your ice
Remove the ice-making unit from
the freezer and leave it to thaw for
about 10 minutes.
8.
Remove the ice molds from the
insulated container by lifting the
tabs on each side.
9.
Caution
After separating the ice molds,
remove the ice from the left and
right molds.
10.
How to improve the appearance of your ice
To remove protrusions, tap the ice gently with
the handle of a spoon or other utensil.
Dierences in freezer environment and water
quality may aect the quality of your ice.
※
Ice may form in the water reservoir. This is
normal and does not indicate a defect.
※
If you cannot separate the ice from molds,
leave the molds to thaw for a few minutes.
※
Tips for making clear ice
If used immediately after being removed from the molds, cracks may
form in the ice . For an optimal appearance, leave the ice at room
temperature and wait until there is no more white frost on the surface.
Cleaning and care
If ice remains in the water reservoir, allow it to thaw and
loosen before removing.
1.
Do not pour hot water into the water reservoir, as this may cause it to
break or become deformed.
This symbol warns of death or serious injury.Warning
This sign warns of injury or damage to property.Caution
Prohibited
Specications
Materials:
Precautions for use
Ice mold / thermoplastic elastomer
Water reservoir / polypropylene
Insulated container / polypropylene
・Do not place near re.
・Do not heat the product or place it in a microwave.
・Do not use alcohol, thinner, benzene, polish or
・metal scrubber for cleaning.
・Do not place in a dishwasher or dish dryer.
・Do not drop or hit the product.
・Do not leave the product in water.
Caution Do not forcibly remove the water reservoir, as this may damage
the product.
Underage drinking is prohibited by law.
The manufacturer reserves the right to change the product specications
without prior notice.
The diagram and illustration in this manual are for reference only. The actual
product is subject to manufacturer specications.
In the event of discrepancies between the Chinese and English version of
this user manual, the Chinese version shall prevail.
•
•
Lift the water reservoir out of the insulated container.2.
Rinse all parts other than the insulated container with
water, place them on a cloth and leave to dry.
3.
※To remove dirt from the insulated container, wring out a wet cloth and gently
wipe the surface of the container.
5 16
←110ｍｍ→ ←110ｍｍ→←109ｍｍ→
Never disassemble, modify or
repair this product.
Failure to observe this warning may
cause an accident or injury.
Prohibited
Do not use for commercial or other
purposes, or in non-domestic settings.
This product is designed for home use only.
Prohibited
Do not subject the ice-making unit to strong
vibrations.Do not step on, throw or drop the unit.
Failure to observe this warning may cause
an accident or injury.
Prohibited
Not for use by unsupervised children;
keep out of reach of infants.
May cause injury to children who accidentally
drink from the insulated container.
Prohibited
Do not place frozen items on this product.
Prohibited
Do not use household detergent, thinner,
benzene, alcohol, polishing powder,
or metal scrubbers to clean the product.
Failure to observe this warning may result
in damage, deformation or discoloration.
Prohibited
Do not use dishwashing detergents
containing citrus-based ingredients
such as orange or lime.
Prohibited
Do not heat in the microwave.
This may produce dangerous sparks.
These may result in discoloration and
deformation.
Prohibited
Prohibited
Do not leave in water for a
long time.
Do not put any liquids other than
water into the ice-making unit.
This may cause the product to rot or
deteriorate or cause mold to grow.
Failure to observe this warning may cause
deformation and discoloration.
Prohibited
Prohibited
Do not soak the ice-making unit in water
while cleaning. Do not place the unit in a
dishwasher or dish dryer.
Do not leave in the freezer for a
long time.
This may cause the ice-making unit to
deteriorate and become damaged.
Thoroughly dry all parts of the ice-making
unit in accordance with the instructions
in the"Cleaning and Care" section.
Failure to do so may result in unpleasant odours.
Prohibited
Instructions
Do not place on the edge of a table.
This may cause the product to fall and
cause damage or injury.
Prohibited
Do not use or store in high humidity,
re, or direct sunlight. Failure to observe
this warning may damage or deform the
product.
Failure to observe this warning may cause the product to become deformed.
Failure to observe this warning may
cause deformation and damage.
Take care not to spill water when
moving the lled ice-making unit.
Instructions
Clean thoroughly after use.
Improper hygiene can cause health
problems.
Instructions
Use the product on a at table.
Failure to do so may cause the product to fall over and cause damage or injury.
Instructions
If you cannot remove the ice molds, leave them to
thaw again for a few minutes.
If you are still unable to remove the ice molds,
they may be stuck to the water reservoir. Remove
the water reservoir from the insulated container,
run water around the water reservoir,
and then remove the ice molds.
• 
• 
Caution
Cold tolerance temperature: -30°C
•
•