Doufit TR-06 User manual

Instruction Manual
(10FT)
TR-06 Trampoline
If the item is damaged or you are missing some parts, please contact [email protected]
with your order number, we will try our best to solve it for you ASAP.

*The maximum weight capacity is 375 Lbs.
*The product must be assembled carefully by 2 adults.
*Place the trampoline on a flat, large and soft place to use, not concrete, asphalt, or any hard coating to prevent slipping
when jumping.
*Before exercise, please take off your valuable accessories, such as glasses, necklaces and watch, to avoid falling.
*Don't put anything in your pocket or on the trampoline during use.
*Don’t use it during smoking or after drinking.
*Don’t jump indoor or under low trees.
*The trampoline must be used in good weather.
*MATS and nets will age prematurely under the long-term direct sunlight. Please store the mat and net indoors If it
snows, rains or winds to prevent premature aging.
*Don’t wear clothes with hooks and shoes during use.
*Close the door on the net before useing.
*Please jump near the central area. Do not walk on the spring pad or the springs.
*Keep the jumping mat and the spring pad dry.
*Please exercise in a well-lighted place.
*Don't jump from the outside or high place to the trampoline.
*Don’t place anything obstacles under the trampoline.
*Don’t somersault or other dangerous jumps. Or you may be paralyzed or even death if landing with the head or neck!
*For children, they can only use it under the supervision.
*The trampoline can’t be used as a jumping board.
*Rest after a moderate jumping. Jumping for a long time will increase the risk of injury.
*Be sure whether the trampoline is loosen, worn, damaged or missing parts before each use.
*Please clean it with a wet cloth, do not use corrosive solvent cleaners and abrasive products.
*Don’t use this trampoline if you have any conditions or diseases as follows:
- Pregnancy;
- Breathing obstacle;
- Spinal injury, cerebral sclerosis,or acutely swollen joints;
- Osteoporosis, Gout, unhealed fractures or surgically implanted orthopedic supports;
- Hypertension, heart disease, or using a cardiac pacemaker;
- Using anti-coagulants in high doses.
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------

Page 2
Parts List
Notice：if any part is missing, distorted or broken when you receive the package, please contact
[e-mail] with your order number, we will send the replacement part to you as soon as possible.
5.Spring x 54
6.Spring pad 9.Net
11.Rope 12.Ladder frame x 2 13.Step pipe x 2
1.Foot pipe x 3 2.Leg pipe x 6 3.Frame pipe x 6 4.Jumping mat
10.Top cap x 6
（On upper support pipes）
7.Upper support
pipex 6
8.Lower support
pipe x 6
15.M6 * 75mm
carriage bolt x 12
14.M6 10mm bolt
x 6
22.Open end
wrench
21.Spring
hook x 2
20.Allen wrench
16.Bracket x 12 18.M6 lock nut
x 22
19.M6*35mm
bolt x4
23.Frame
joint x 6
24.M6*48mm
bolt x 6
25.M6 flat
washer x 6 26.Stake x 6
17.M6 washer
x 20
27.Pair of
gloves x 2
All parts in this package are listed as above.
The rope(No.11) and two hooks(No.21) are packed in the package of the instruction manual.
Please wear gloves(No.27) when assembling the trampoline.
The oil on the steel pipe is used to prevent rust. You can easily wipe it away.

Page 3
Assembly Method
Step 1: Assemble the foot pipes
For the step, please prepare three foot pipes(No.1), six
leg pipes(No.2), six M6*10mm bolts(No.14) and the
Allen wrench(No.20).
Attach six leg pipes to three foot pipes. And then screw
six M6*10mm bolts by using the Allen wrench.
Step 2: Assemble the frame pipes
For the assembly video, please visit:
www.youtube.com/channel/UCorBKk34KZgI96OyGSkjFdA
2
1
14
And then attach three foot pipe assemblies to the frame.
For this step, please prepare six frame pipes(No.3), six M6
lock nuts(No.18), two wrenches(No.20)(No.22), six frame
joints(No.23), six M6*48mm bolts(No.24), and six M6 flat
washers(No.25).
Attach a frame joint to the bigger side of the frame pipe.
If it is too difficult to insert completely, please knock the
square tube of the frame joint with a hammer.
Insert a M6*48mm bolt from the outside of the frame
joint. Screw a M6 flat washers and a M6 lock nut to fix.
Connect other frame pipes as above.
3
23
3
18
25
24
Attention: Don't knock the round tube! Or it will be deformed
and damaged.
Connect the smaller side of the second frame pipe and then
connect other frame pipes in the same way.
For the last connection, please place one side against the wall.
And then try your best to press frame pipes of the other side
inward, so that the frame can be connected well.
Attention: Before you connect all frame pipes, DON’T screw
bolts to fix them! Otherwise, the final main pipe will be
difficult to connect!
Please wear gloves(No.27) when assembling the trampoline.

Page 4
Step 3: Assemble the jumping mat
Attention: Two hooks of the spring(No.5) are different.
The more curved hook should be attached to the jumping
mat(No.4), while another side should be attached to the
frame.
You need to attach the springs by using the spring hook as
follows, or it will be difficult to finish.
Firstly, attach a spring every 10 holes.
Secondly, attach a spring every 5 holes.
Thirdly, attach a spring every 2 holes.
Finally, attach the remaining springs to the remaining
holes.
Step 4: Assemble the spring pad
Cover the spring pad(No.6) on the springs. And then tie
the rope under the pad.
1234
5
1
6
78
9
10
2345
6

For this step, please prepare six upper support pipes(No.7),
six lower support pipes(No.8), twelve M6*75mm carriage
bolts(No.15), twelve brackets(No.16), twelve washers
(No.17), twelve M6 lock nuts(No.18) and two wrenches
(No.20)(No.22).
Attention: The lower support pipe has two holes on one
side, while the upper support pipe doesn’t have.
Insert an below support pipes to each upper support pipe.
Attach six support pipe assemblies and twelve brackets
to the frame. And then screw twelve M6*75mm carriage
bolts, twelve washers and twelve M6 lock nuts by using
two wrenches.
There are six bands on the net. Insert six bands through six top caps(No.10) on upper support pipes.
Attach six plugs to six bands.
Insert the plugs to the sockets.
g
Align the connecting holes of the net to the triangular rings of the jumping mat.
Insert a rope(No.11) through the connecting holes and the triangular rings.

7
For this step, please prepare two ladder frames(No.12), two
step pipes(No.13), eight M6 washers(No.17), four M6 lock
nuts(No.18), four M6*35mm bolts(No.19) and two wrenches
(No.20)(No.22).
Attach two step pipes to two frame pipes. And the screw
four M6*35mm bolts, eight M6 washers and four M6 lock
nuts by using two wrenches.
Finally hook the ladder to the frame.
Attention:
Please place the trampoline on a flat ground to use, other-
wise, it will shorten the life of the trampoline;
After assembly, please do not drag the trampoline; If you
must move it, please re-adjust the trampoline after moving.
You can only use it again after you confirming that all of
the legs of the trampoline are perpendicular to the ground,
otherwise, the trampoline will tilt or even collapse.
26
Step 8: Fix the trampoline
Please place the trampoline on a flat ground.
Insert the wind stakes(No.26) on both ends of each foot pipe
to fix trampoline.
Attention:
Please place the trampoline on a flat ground to use, otherwise, it will shorten the life of the trampoline.
After assembly, please do not drag the trampoline. If you must move it, please re-adjust the trampoline
after moving. You can only use it again after you confirming that all of the legs of the trampoline are
perpendicular to the ground. Otherwise, the trampoline will tilt or even collapse.

If the item is damaged or you are missing some parts, please contact [email protected]
with your order number, then we will try our best to solve it for you ASAP .