Doufit EB-09 User manual

Instruction Manual
EB-09 Indoor Cycling Bike
!
* Please read the instruction manual carefully and follow it.
* Please keep the instruction manual for your later use.
* If you want to give this product to your friends, don't forget to bring them the instruction manual.

Catalogue
Precautions
Precaution
s--------------------------------------------------------------------------------------------------------- - --
Parts List ----------------------------------------------------------------------------------------------------------- - --
Exploded Drawing -------------------------------------------------------------------------------------------------- - -
Service
------------------------------------------------------------------------------------------------------------- - --
1
2
3
Usage Details
----------------------------------------------------------------------------------------------------------
7
Assembly Method
-------------------------------------------------------------------------------------------------- - -
4
Details of Monitor
------------------------------------------------------------------------------------------------- - -
6
7
To reduce the risk of serious injury, please read the following precautions before using the bike.
*The maximum load bearing is 120 Kg (about 264 Lbs).
*Don't use this bike without your physician's approval.
*If you feel unwell during using the bike, please stop using it immediately and consult your doctor for
instructions before next use.
*Keep children and pets away from the bike. The bike is designed for adult use only.
*For your safety, you must keep at least 0.6 meter away from anything around during exercise.
*Please place the bike on a flat, dry and solid place to avoid falling. If necessary, use a rubber mat underneath
to avoid slipping.
*Always check if all of the screws and bolts are tightened. And regularly check all of moving parts for
obvious signs of wear or damage.
*If you find any defective components or hear any unusual noise coming from the bike during use, don't use
the bike until the problem is solved.
*It is better to wear proper sportswear during exercise. Don't wear the clothes too loose to avoid getting stuck
and dragged.
*Before using, please warm up at first, Ride lightly, adjust your breath and pace to slowly get into motion.
*The flywheel is large inertia. If you want to brake urgently, you need to press down the resistance adjust-
ment knob to avoid muscle strain or other injures.
*Regular exercise with relevant nutritious diet is more effective for your fitness.
*Don't use the bike immediately after diet or drinking, you need to wait for at least 1 hour.
*Clean it with a wet cloth. Corrosive solvent cleaners are prohibited.
Page 1

Page 2
Parts List
Screw Accessories
14.M8 carriage bolt*4 16.M8 acorn nut*4 17.M6 Allen bolt*4 15.M8 curved washer*4
18.M6 flat washer*4 20.Allen wrench 21.Open end wrench*2
19.Plum nut
（Pre-installed）
Component
5.Handlebar
extension pipe
6.Knob*2
(one is pre-installed) 7.Handlebar 8.Monitor
9.Battery*2 10.Phone holder
11.Saddle extension
pipe (Pre-installed)
12.Saddle
（Pre-installed）13.Cable cover
4.Pedal*21.Frame 2.Front foot pipe 3.Rear foot pipe
SCAN
TIME
SPD
DST
CAL
ODO
Notice：if any part is missing, distorted or broken when you receive the package, please contact
[email protected] with your order number, we will send the replacement part to you as soon as possible.
13-15mm
17-19mm

Page 3
Exploded Drawing
4
3
2
814
15
16
18
17
7
10
13
5
12
11
19
6
1
6
SCAN
TIME
SPD
DST
CAL
ODO
PULSE

Page 4
Assembly Method
Step 1: Assemble the foot pipes
For this step, please prepare two foot pipes(No.2)(No.3), four M8 carriage bolts(No. 14), four M8 curved
washers(No.15), four M8 acorn nuts(No.16) and an open-end wrench(No.21).
Notice: There are two kinds of foot pipes. The front foot pipe has two wheels, while another one doesn't have
wheels.
Attach the front foot pipe to the front of the main frame. Notice the wheels should face outward.
Attach the rear foot pipe to the rear of the main frame.
Screw four M8 carriage bolts, four M8 curved washers and four M8 acorn nuts by using the wrench to fix them.
Step 2: Assemble the pedals
For this step, please prepare two pedals(No.4) and two open-end wrenches(No.21).
Notice: The letters "L" and "R" and the screwing directions of pedal bolts are indicated in the stickers on the
pedal.
The screwing directions of two pedal bolts are different.
Attach the pedals to the relevant pedal arms. Screw the left bolt anticlockwise and the right bolt clockwise
with two wrenches.
4
3
4L
R
2
15
16
14 14
15 16

Step4: Assemble the saddle
(This step is already installed, here is how to adjust the position.)
Insert the saddle extension pipe(No.11) to the back of frame. Screw the knob(No.6) to fix it.
Page 5
Step 3: Assemble the handlebar
For this step, please prepare knob(No.6), handlebar(No.7), monitor(No.8), two batteries(No.9), phone holder
(No. 10), cable cover(No.13), four M6 Allen bolts(No.17), four M6 flat washers(No.18), and Allen wrench
(No.20).
Attention:Please pull out the protective metal tube first.
Insert the handlebar extension pipe to the front of frame. Screw the knob to fix it.
Attach the handlebar to the handlebar extension pipe.
Screw four M6 Allen bolts, four M6 flat washers by using the Allen wrench.
Attach the phone holder to the handlebar.
Install two batteries into the back of the monitor.
Insert the monitor to the monitor holder in front of the handlebar.
Connect the sensor cables between the frame and monitor.
Insert the plug of the pulse sensor cable from the handlebar to the monitor.
Put the cables into the cable cover together.
12
19
6
7
17
18
8
9
10
Protective Metal Tube
Pull Out

Page 6
Details of Monitor
Parameters
Operation
Turn on/off
The monitor will automatically turn on when you start to exercise, and you can also turn on it manually by
pressing those buttons.
The monitor will automatically turn off after a while when you stop exercise.
If there is no data showing, please check if the wire has connected, or change the batteries.（The battery
model is AAA .）
Mode
Time(TIME) ---------------------This mode displays the time you have pedaled.
Speed(SPD) ----------------------This mode displays the speed of your exercise in real time.
Distance(DIST) ------------------This mode displays the distance you have pedaled.
Calories(CAL) -------------------This mode displays the calories you have burned during your exercise.
Odometer(ODO)-----------------------This mode displays the total distance you have pedaled since the exercise
bike was purchased or reset.
Pulse(PUL) ----------------------This mode displays your heart rate per minute.
Scan(SCAN) ---------------------This mode displays above 6 modes automatically in turns.
When“SCAN” is pointed in the above left corner of the screen, the data will switch automatically one by
one; And you also can scan each data by pressing the button.
Reset
If you long press the button over 3 seconds, all data will be reset except odometer.
If you re-install the battery, all data also will be reset.
Time(TIME) 00:00-99:59
0.0-99.9ML/H
0.0-999.9KCAL
0.00-99.99ML
Speed(SPD)
Distance(DST)
Calories(CAL)
0-9999MLOdometer(ODO)
SCAN
TIME
SPD
DST
CAL
ODO
PUL
Pulse(PUL) 40-240BPM

Page 7
Service
If you have any question or problem, please contact our service email
with your order number.
Usage Details
Our Website: www.doufit.net
Our Email Address: [email protected]
stop
Rotating clockwise the resistance knob, the resistance
will increase. On the contrary, rotating anticlockwise,
the resistance will reduce.
If you want to brake urgently, you need to press down
the resistance adjustment knob to avoid muscle strain or
other injures.
If the bike wobbles, please adjust two caps on the rear
foot pipe to adjust balance.