DOURADA WM-779 User manual

™
™
1.5VAAA
1.5VAAA
CAUTION: To use this device properly, please read
the user’s manual before installation
FEATURES
Aluminum wireless optical mouse with 4 keys
Ergonomic design suitable for use in both hands
Compatible with computers featuring standard USB ports
SPECIFICATIONS
Resolution: 800/1200/1600 DPI
Wireless Range: 10M
Dimensions: 4.5" x 2.4" x 1.26"
Designed and distributed by indiCo, LLC
Oberlin, OH 44074 USA
DOURADA™ is a trademark of indiCo, LLC.,
and is registered in the U.S. and Canada.
2. Insert the USB nano receiver into your computer’s USB port
CONNECTING THE MOUSE
1. Open the battery cover and insert 2 x AAA batteries (not included);
Turn mouse on using the On/Off switch found on the bottom
USER MANUAL
CLASSICWIRELESS
OPTICAL MOUSE
CAUTION: To use this device properly, please read
the user’s manual before installation
CONNECTING THE MOUSE
1. Open the battery cover and insert 2 x AAA batteries
(not included); Turn mouse on using the On/Off switch
found on the bottom
2. Insert the USB nano receiver into your computer’s USB port
FEATURES
USB nano receiver can be stored inside the mouse, under the cover.
Features a maximum wireless range of up to 10M thanks
to advanced 2.4Hz wireless technology.
Powered by 2 x AAA batteries with a maximum
battery life of 12 months.
USB nano receiver supports plug & play functionality.
Simply insert the receiver into your computer’s USB port.
After 10 minutes of inactivity, the mouse will automatically enter
sleep mode. Press any button to wake up the mouse.
SPECIFICATIONS
Compatibility: Windows 8.1/8 / 7 / Vista/ XP; Mac
Resolution: 1000 DPI
Wireless Range: 10M
Power Source: 2 x AAA batteries (not included)
Mouse Dimensions: 4" x 2.25" x 1.25"
Designed and distributed by indiCo, LLC
Oberlin, OH 44074 USA
DOURADA™ is a trademark of indiCo, LLC.,
and is registered in the U.S. and Canada.
WIRELESS
OPTICAL MOUSE
USER MANUAL
WM-779
WM-796

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.