dp smart ROGY Docking Instruction manual

43
21
Type-C USB Cable
(option)
USB to RJ-45 Adaptor
(option)
Batt. Power Indicator
3. Plug the Type-C connector of the USB cable in the
Type-C USB Port of Docking.
4. Plug the Type-A conector of the USB to RJ-45
adaptor in the Type-A Plug of Docking.
Note: 1. The Docking can be used alone without to
connect the USB cable and the RJ-45
adaptor as a power bank with the Rogy.
2. The type-A USB port of Docking also
support the UVC mode. Connect the other
Type-A plug of USB cable to a computer
which support the UVC driver then you can
use the Rogy as a web camera.
(Roay still support the UVC function
without to mount the Docking. It can
support the same UVC mode via the
type-c USB cable connect Rogy to a USB
port of PC directly.)
OPERATION 2
OPERATION 2
Tripod Mount Screw
Type-C USB Plug
Rogy
(option)
Tripod Mount
Type-C USB Port
2. Push down the Rogy on the Docking then turn the
Tripod Mount Screw Wheel clockwise and tight it.
1. Plug in the Rogy on the Docking.
Note: Make sure the tripod mount of
Rogy aim at the tripod mount
screw of Docking and the Type-C
USB Port has connect with the
Type-C USB plug of Docking.
OPERATION 1
OPERATION 1
Tripod Mount
Power / Reset Button
Battery Power Indicators
Type-C USB Port
Type-A USB Port
Type-C USB Plug
Tripod Mount Screw
Tripod Mount Screw Wheel
LED 4
LED 3
LED 2
LED 1
OVERVIEW
OVERVIEW
Quick User Guide
Quick User Guide
ROGY Docking
ROGY Docking

5 6
7 8
Thank you for your interest in our products and services. This
warranty is only applicable to Docking products purchased and
sold this time. This warranty covers any missing parts or quality
under normal use during the warranty period, and provides the
body (excluding accessories and consumables) with one year
warranty service. The warranty period is calculated from the date
of purchase and shipment. During the warranty period, if the
product fails under normal use, the company provides free
replacement and repair services.
However, if the following conditions are not covered by the
product warranty, the customer must bear the repair costs.
• Any natural damage, irresistible external force, abnormal
operation, or human-made damage (such as: the main unit is
exposed to liquid or moisture, the casing is broken, etc.).
• The user has to disassemble or repair the seal, sticker or
nameplate.
• Any incorrect or improper installation, maintenance, repair,
alteration or tampering with products other than those
indicated in the instructions for use of the product will not be
covered by the product warranty.
• The product is subject to wear and degradation due to natural
disasters, misuse, accidents, natural use, improper weather
conditions (such as lightning strike, flooding, rain, high tempera-
ture exposure, etc.) or lack of regular maintenance.
• The model and serial number of the product have been
altered, defaced or removed.
• Damage or scratches to the appearance of the product.
• Any other product design flaws, flaws, and damage to
materials.
• The warranty does not include any shipping costs, handling
fees, or other costs not related to the product warranty.
If you have other questions related to the use and maintenance
application, please call our customer service hotline or e-mail
directly, and a customer service specialist will contact you.
Service Line: + 886 2 2696 1069
e-mail: [email protected]
Web: https://dpsmart.com.tw/contact/
WARRANTY
WARRANTY
Specifications
Model: Battery Docking Station
Battery Type: Li-ion rechargable battery
Cell Capacity: 10000 mAh
Input: DC 5V / 3A
Output: DC 5V / 3A (max.)
Charging Time: Approx. 4 ~ 5 hours *1, *2
*1 With the certified DC 5V / 3A adaptor and the USB cable which
sold with Rogy.
*2 If charging the Docking and use the Rogy at the same time. Since
the top priority of the battery power will supply the Rogy and use
the remain power to charge the Docking. Therefor the charging
time shall be longer.
Operating Temperature: 0° C ~ 45° C (charge)
-20° C ~ 60° C (discharge)
Storge Temperature: -20° C ~ 45° C
Storge Humidity: 65% ± 20% RH
Dimension: ø86 (up) x ø78 (down) x 99 (H) mm
Weight: 383.7 g
Charge mode: LEDs will keep on.
Discharge mode: LEDs will off after 5 seconds. Press the Power / Reset key
to show the battery level. When LED1 blinking mean the
battery is low power under 5% and need to recharge.
LED 4
Off
Off
Off
Off
Off
On
LED 3
Off
Off
Off
Off
On
On
LED 2
Off
Off
Off
On
On
On
LED 1
Off
Blinking
On
On
On
On
Battery Level
Undervolatage
1-5%
5-25%
25-50%
50-75%
75-100%
Discharging
LED 4
Off
Off
Off
Blinking
On
Blinking
LED 3
Off
Off
Blinking
On
On
Blinking
LED 2
Off
Blinking
On
On
On
Blinking
LED 1
Blinking
On
On
On
On
Blinking
Battery Level
0-25%
25-50%
50-75%
75-99%
Fully Charged
Charging Error
Charging
TECHNICAL NOTES
TECHNICAL NOTES
7. Turn the Tripod Mount Screw Wheel counterclockwise to
release the Tripod Moubt Screw until the Rogy separate from
the Docking.
Note: Be careful and make sure you have holded the Rogy
(or holded Rogy and Docking together) before release
it to avoid drop down the Rogy when the tripod screw
separated.
OPERATION 4
OPERATION 4
5. Plug the Type-A connector of the USB cable to the USB
port of the DC 5V / 3A adaptor.
6. Insert a Ethement Cable in the RJ-45 port of the USB to
RJ-45 adaptor.
Note: The Docking will power on automatic when the Rogy
plug in the Docking and the USB port of Rogy has
connected. The Docking is charging the Rogy and
the charge indicator of Rogy will light.
USB Adaptor DC 5V/3A
(option)
Cat. RJ-45 Ethernet Cable
(option)
Charge Indicator
OPERATION 3
OPERATION 3

9 10
11 12
BATTERY SAFETY NOTICE
BATTERY SAFETY NOTICE
Built-in Rechargeable Battery
In order to prolong the battery life, it is recommended to charge the
battery to more than 30% ~ 50% of the power every time, and recharge it
at least every three months to avoid excessive battery discharge.
Warning: If the liquid of the battery gets into your eyes accidentally,
do not rub your eyes and immediately rinse eyes
thoroughly with water such as clean water. Seek medical
attention immediately, otherwise it may cause vision
damage.
Attention: • Please charge the lithium ion battery in a place where the
room temperature is 5 ~ 35 °, otherwise it may cause the
battery failed to charge or the charging time is too long, or
may cause the battery to age.
• Please pay attention to the charging situation at any time,
and keep away from flammable materials.
• When the battery charge indicator of the camera shows it is
fullly charged, you should stop charging immediately.
• When the charging time greatly exceeds the time specified
by the lithium-ion battery but the charging has not been
completed, please stop charging.
Built-in Rechargeable Battery
Denger: Do not try to replace the built-in lithium ion rechargeable battery.
If you use a battery type that is incompatible with the assigned
model, there may be an explosion, overheating, or other risks.
Do not try to disassemble or modify the built-in battery pack. If
you try to disassemble or modify the battery pack, it may cause
risks of an explosion or leakage of battery fluid.
When disposing of the battery, please follow all relevant local laws or
regulations. Do not dispose of the battery pack as municipal waste,
please dispose of the discarded battery according to the relevant
instructions.
The built-in battery pack contains a small amount of harmful substances,
to avoid injury:
• Except for the professional maintenance enginner assigned by the
original manufacturer, the battery shall not be replaced.
• Keep the battery pack away from fire or other heat sources.
• Do not expose the battery pack to water, rain, or other corrosive liquids.
• Do not place the battery pack in an extremely high temperature
environment.
• Do not pierce with nails, hit with a hammer, step on with your feet,
strongly hit or throw the battery.
• Avoid short circuit of the battery pack.
• Keep the battery pack out of the reach of young children and pets.
• Do not place the battery pack in an environment with extremely low air
pressure. It may cause an explosion or flammable liquid or gas leakage
from the battery.
BATTERY SAFETY NOTICE
BATTERY SAFETY NOTICE
• Requirements in AT / BE / BG / CZ / DK / EE / FR / DE
/ IS / IE / IT / EL / ES / CY / LV / LI / LT / LU / HU / MT /
NL / NO / PL / PT / RO / SI / SK / TR / FI / SE / CH /
UK / HR. 5150MHz~5350MHz is for indoor use only.
• Radio equipment specifications:
(a) frequency band(s) in which the radio equipment operates
2412 ~ 2472 MHz / 5120 ~ 5350 MHz
(b) maximum radio-frequency power
18.63 dBm ~ 18.75 dBm
• SAR is measured with the device at 5 mm to the body, while transmitting
at the highest certified output power level in all frequency bands of the
device. The maximum SAR value is 0.019 W/kg (head/body) averaged
over 10 gram of tissue.
• This equipment should be installed and operated with a minimum
distance of 5 cm between the radiator and your body.
• Simplified DoC:
Hereby, dp smart technology declares that the radio equipment type
Rogy Battery Docking is in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the
following internet address: No. 287-2, Sec. 3, Chengde Rd., Datong
Dist., Taipei City 103, Taiwan
SAFETY NOTICE
SAFETY NOTICE
Federal Communications Commission (FCC) Statement
15.105(b)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
15.19
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) This device may not cause harmful interference and
2) This device must accept any interference received, including interfer-
ence that may cause undesired operation of the device.
15.21
You are cautioned that changes or modifications not expressly approved
by the part responsible for compliance could void the user’s authority to
operate the equipment.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the
radiator and your body.
FCC ID : 2AVSX-ROGYBATTERYDOCKING
SAFETY NOTICE
SAFETY NOTICE