DPCAV BLACK PEARL RC801 User manual

Part Number: LCD-RC801-NBC
Part Number: LCD-RC801-SMA
BLACK PEARL
RC801
7”Screen / 5.8GHz / FPV Diversity RX
Instruction Manual
Before operating the unit: Please read this manual thoroughly and retain it for future reference.

Table of Contents
Safety Notice.................................................................................................................................. 
Packing List................................................................................................................................. 
Battery............................................................................................................................................. 
Icons................................................................................................................................................ 
Operation Instructions.............................................................................................................. 
Function Instructions.................................................................................................................. 
Function In truction (continued) .....................................................................................................
Menu............................................................................................................................................ 
Specifications............................................................................................................................ 


Safety Notice
Warning
●In order to reduce the damage from fire, electric shock, or product hazard, do
not expose the unit to rain or moisture.
●Please use only the recommended accessories.
●Do not disassemble this product; It should be repaired by an authorized repair
person.
Battery
●DO NOT dismantle the battery.
●DO NOT short the battery terminals or touch them with metal objects. There is
explosion danger!
●DO NOT use a damaged or leaking battery.
●DO NOT throw the battery into fire
●DO NOT use or store the battery in a location that will exceed 65

.
●DO NOT drop or strike the battery.
●Keep the battery out of childrens’
’’
’reach.
●Please replace the battery immediately if its operating time has significantly
declined.
●Replace the battery with the same one or the equivalent recommended by the
manufacturer.
●This device uses a Lithium battery. Please discard at an official recycling
location.
Caution
●A strong magnetic field or frequency may affect the image and sound of this
device.
●DO NOT install or store this device in book cabinet, closet, or other closed
spaces to avoid such risks as electronic shock or fire due to overheating.
●DO NOT place this device near open fire.
●This device is not dustproof or waterproof. Use only indoors or weather
protected outdoor environments.


Packing List
Main Body Sun Shade
Battery Antenna AV Cable
(included with #LCD-RC801-SMA)
DC Input Cable DC Output Cab


Battery
Battery Installation (Battery included with #LCD-RC801-SMA)
●Push the battery socket with gold
contacts toward the gold contacts of
the battery compartment of the
device and press the battery
down. When the battery reaches
the bottom of the battery
compartment the battery will
automatically lock in place.
● An external 7VDC to 28VDC supply can be used instead of the rear mounted
battery pack.
Recharge the Battery
●Please use the recommended AC Adapter-Charger power supply to charge the
battery.
●Please recharge the battery fully BEFORE each use.
●During recharging the red indicator light is on. After recharging the green
indicator light is on.
Sun-Shade (3-piece hood)
Install the Sun-Shade
●3 pieces of baffles make up the sun-shade. First install the sides of main body
then install the top baffle.
●When you disassemble the sun-shade please take off the top baffle then the
right and left sides.


Icons
Function Icons
Screen Icons
●There are different icons in different working modes.
●When the battery icon is shown as it means it needs to be recharged.


Operation Instructions
Power on/off
●To turn on the monitor press and hold the power button. Release it when the
red light is on.
●To turn off the monitor press (and hold) the power button and release it after the
monitor shuts off.
Working Mode
●Press mode button can set up: DIV

RX1

RX2

AV IN

HDMI IN model.
●Video TV system set-up (except HDMI mode): Press menu button to enter
‘
‘‘
‘function’
’’
’then ‘
‘‘
‘Video sys’
’’
’to choose PAL or NTSC.
●The DIV

RX1

and RX2 modes are factory configured for all seven channels on
Band F (fully compatible with 5.8GHz ImmersionRC and FatShark).
Diversity Mode (normal applications)
●The duel antenna diversity function automatically selects the antenna (ANT1 and
ANT2) with the highest signal strength (RSSI) for best RF link.
●Antenna LED will show the current selecting antenna (strongest signal).
●< - > and < + > button controls the RF channel change. There are 7-channels are
available and they must match the channel used by the video transmitter.
●The DIV AV OUT jack is used for connecting a video recorder or an external
display.
NOTE: DIV AV OUT ONLY works under the diversity mode.
RX1 and RX2 Mode (special applications only)
●Under this mode the RF channel of RX1 and RX2 can be set up separately.
●< - > button selects the RX1 channel and the < + > button selects the RX2
channel.
● The RX1 AV OUT and RX2 AV OUT jacks can be used to connect external
monitors for viewing two different video transmitters at the same time.
●If there is only one transmitter being used then diversity mode is recommended
instead of RX1/RX2 mode.
●When using the RX1/RX2 modes with two transmitters be sure to space their RF
channels far apart to avoid adjacent channel interference.


AV IN Mode
●The AV IN mode is for external NTSC/PAL video and audio signals. For example,
you can connect the Black Pearl to any quality made FPV receiver (900MHz,
1.2GHz, 1.3GHz, etc.).
●In AV IN mode the internal wireless receivers automatically shut down to extend
battery life.
HDMI Mode
●HDMI can input HD video to show much clearer image and automatically adapt to
the resolution (the maximum input 1920X1080/60Hz).
●In HDMI mode the internal wireless receivers automatically shut down to extend
battery life.
●Pressing the mode button during the HDMI mode may have slow response. This
is a normal behavior.


Function Instructions
ZOOM Function
●Vertical Scaling
This function can alter the vertical size (zoom) scaling. Long press < > button to
ZOOM IN

long press < > button to ZOOM OUT (back to original scale)
Attention: HDMI does not support vertical scaling.
For example: original scale ZOOM IN
●Horizontal Scaling
This function can alter the horizontal size (zoom) scaling.
The default is 16:9 mode (ZOOM IN full screen display). To change the setting please
enter the menu->Function-> Display Ratio and choose 4

3 or 16

9 screen format. For
example:
Original scale 16:9 (ZOOM IN)
The scaling functions can be used to obtain the display format that you want. For
example, the images shown above can be made to appear as follows:


Function Instructions (continued)
DNR
When an external signal is input the DNR (digital noise reduction) can be used to
reduce video noise caused by some types of RF interference. The DNR features may
not function on all interference so please experiment with it to see if it helps your
video image.
Display Direction
In the menu, Flip Horizontal and Flip Vertical can control video display direction. Flip
Horizontal is for image mirror display. Flip Vertical is for upside down display.
- This feature helps CAMERA inverted installations.
- Attention: The screen icon will also change display direction


Menu
(Bold text is menu function)
While the monitor is turned on, enable the on screen menus by quickly pressing and
releasing the power
button (half-second press). The menus consists of 4 directories: Color

Sound


Function

and RF.
Press button to enter settings.
Press or buttons to browse options and adjust values.
Color
●Picture Mode Bright
Standard Default setup (recommended setting)
Soft
User-Brightness

Contrast

Saturation

Sharpness
●Color Temp Warm
Normal
Cool
●DNR off Turn off DNR
Low Minor noise
Mid Middle noise
High May reduce the quality of the image
Sound
●Sound Mode Standard
Class
Dance
Live
Pop
Rock
User-Bass

Treble
●Balance 0~20 adjust left/right speaker balance. The default is 10
(both speakers have the same volume).
Function
●Language English

French

German

Spanish

Portuguese

Japanese


Russian

Italian
●OSD setting OSD Timeout 0~60 seconds
Transparency 0~4 level (translucent display effect)


Specifications
•
••
•Display Ratio 4

3
16

9
Auto (Display full screen according to input resolution)
●Reset Restore factory settings
●Auto Power Off Off

15Mins

30 Mins

45 Mins

60 Mins
●Flip Horizontal On

Off (Mirror image display control)
●Flip Vertical On

Off (Image 180 degree rotation control)
●Icon On

5 Sec

10 Sec

15Sec

20 Sec

25 Sec


30 Sec

35 Sec

40 Sec

45 Sec

50 Sec


55 Sec

60 Sec ㎡㎡㎡
Set the status icon on the screen (shown all the time or
hidden automatically according to set time)
●Video Sys PAL or NTSC. Check setting before first use!
Wireless
●-Diversity band F
●-RX1 band F
●-RX2 band F


Diagonal 7 inch
Resolution 1024X600
Contrast 700:1
Display
Screen
Luminance 300cd/
BAND F
CH 1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
FREQUENCIES
5740M
5760M
5780M
5800M
5820M
5840M
5860M
5880M
Sensitivity
-90dBm ±1dBm
Channel
32Channel ( 4 Band X 8 Channel )
Antenna
2 X SMA, 50 ohm
Diversity
Antenna diversity (dual receivers)
TV System
NTSC/PAL
Video level
1.0Vp-p Typ, 75ohm
Wireless
Receiving
Audio level
1.0Vp-p Typ, 10Kohm
RX1 AV OUT
VideoAudio output
RX2 AV OUT
VideoAudio output
DIV AV OUT
Diversity receiving, VideoAudio output
AV IN
VideoStereo Audio input
HDMI IN
A Type, HDMI 1.3 Digital Input, Support HDMI Audio in
AV
Port
Speakers 8Ω/1W X 2
DC IN
728V/ 2A
DC OUT
Output VoltageDC IN or battery voltage, 1A Max
Battery 11.1V/1000mAh (3 series LiPo cells), optional
Power
Supply
Watts 12V input: 7.8W
Main
183X126X19.5mm (not including sun shade)Size
Battery
105X87.5X6.7 mm
Main body
350 gWeight
Battery
95 g
Tripod connector ¼-20 thread (camera tripod mount)
Working Temperature
-
10℃+65 ℃