DRACAST LED2000 User manual

STUDIO SERIES LED2000 INSTRUCTION MANUAL

THANK YOU
• Thank you for purchasing your Dracast STUDIO Series LED2000. We’re
condent that your Dracast light will provide years of reliable service.
• Please review this instruction booklet before using your Dracast light.
• To ensure proper continued operation, only use the power supply that is
included with your Dracast LED2000.
• To protect your eyes, do not look directly into the LED2000 while it is
powered on.
• To prevent electric shock, the LED2000, power supply, and any batteries
should be kept away from water or excessive moisture. Never submerge
the LED2000 or power supply.
• Make sure that the ventilation slots on the back of the LED2000 are clear
during operation. Covering these vents will cause the unit to overheat and
possibly malfunction.
• To extend the life of the LED2000, turn the unit o when it is not in use.
• Store the LED2000 in a clean, dry place with good ventilation. Do not store
the LED2000 in direct sunlight for extended periods.
• In case of malfunction, do not open your Dracast LED2000 unit. Please
consult your nearest Dracast repair center for assistance. Opening the
Dracast unit will void its one-year warranty.
FEATURES
• Anodized aluminum frame and all-metal chassis
• DIgital display with light output, color temperature, and DMX address
• Local and remote DMX control
• 95 CRI (Color Rendering Index) for ultra-pure light
• High output. Up to 10000 Lux or 929 Footcandles
• Included mounting yoke for use with 5/8”(baby pin) studs
• Locking yoke knobs
• Optional barn doors, lters, soft boxes, and more
• x1 Dracast STUDIO Series LED2000
• x1 24V A/C Power Supply for LED2000
• x1 5/8” Mounting Yoke
• x1 Nylon soft carrying case
• x1 Clear plastic LED board protector
INCLUDED IN THE BOX

OPERATING INSTRUCTIONS
Powering the light
The Dracast STUDIO Series LED2000 has one power option to choose from.
- A/C Power - Plug the power supply (included) into the XLR port on the back
of your LED2000. Press the power switch to“ON”
Understanding the Controls
Your Dracast STUDIO Series is equipped with full DMX 512 remote functional-
ity. The dimming and color controls (if available) can be controlled either via a
standard DMX controller or locally by using the control panel
on the back of the xture.
The control panel has an Digital display and four buttons directly below it.
These four buttons perform the following actions.
SETUP - Cycles through each adjustable option. (Currently selected menu item
ashes.)
UP - Adjust the selected item up.
DOWN - Adjust the selected item down.
ENTER - Conrms the current selection.
PHOTOMETRIC DATA
LED2000 STUDIO 5600K
DRS-LED2000-DX
3 ft / 0.9 m 6 ft / 1.8 m 9 ft / 2.7 m 12 ft / 3.6 m
929 fc
10000 lux
321 fc
3450 lux
166 fc
1785 lux
98 fc
1050 lux
LED2000 STUDIO 3200K
DRS-LED2000-TX
794 fc
8550 lux
274 fc
2950 lux
137 fc
1475 lux
84 fc
900 lux
LED2000 STUDIO
3200K - 5600K
DRS-LED2000-BX
376 fc @ 3200K
753 fc @ 4400K
390 fc @ 5600K
4050 lux @ 3200K
8100 lux @ 4400K
4200 lux @ 5600K
127 fc @ 3200K
251 fc @ 4400K
139 fc @ 5600K
1370 lux @ 3200K
2700 lux @ 4400K
1500 lux @ 5600K
65 fc @ 3200K
123 fc @ 4400K
68fc @ 5600K
700 lux @ 3200K
1325 lux @ 4400K
730 lux @ 5600K
39 fc @ 3200K
73 fc @ 4400K
40 fc @ 5600K
420 lux @ 3200K
785 lux @ 4400K
430 lux @ 5600K

LED2000 STUDIO SERIES DETAILS PRODUCT SPECIFICATIONS
Anodized Aluminum Frame
DMX Panel, Local Dimer and Color
Temp Controls
Locking Yoke Knobs
Power Switch
A/C Power Input
5/8” Aluminum
Mounting Yoke
Optical System: 2048, 5mm LED bulbs in 32 x 64 arrangment
Light Aperture: 4.75 x 10 inches (331mm x 558m)
Beam Angle: 45 degrees
Weight: 9.5 lbs
Handling: Aluminum Yoke, Dual Locking Tilt Control
Mounting: Baby 5/8” Pin
Tilt Angle: +/- 90 degrees
Voltage Input: 24 V DC
Power Consumption: 130 W
Power Connection: 4-Pin XLR, 110 - 240 VAC, 50 - 60 Hz, 2.0 A
Battery Connection: N/A
Battery DC Voltage: N/A
Battery Light Output: N/A
Color Temperature: 3200K - 5600K (Variable or xed color tempera-
ture depending on model)
Color Rendition: CRI > 95
Dimming: 0 - 100% Continuous
Controls: Local On-Board Manual Controls, RJ45 DMX In / Out Ports
Housing Color: Anodized Blue / Black
Housing build: Aluminum
Estimated LED Lifetime: 50,000 hours
Digital Status Display
DMX In/Out Ports

www.dracast.com
408.229.9222