Dragon Touch Vision 3 User manual

V4.0
VISION 3
ACTION CAMERA

1
CONTENTS
Contents --------------------------------------------------------------------------------------------------- 01
What's in the Box--------------------------------------------------------------------------------------- 02
Your Vision 3 --------------------------------------------------------------------------------------------- 03
Getting Started ------------------------------------------------------------------------------------------ 05
Overviews of Modes ---------------------------------------------------------------------------------- 06
Customizing Your Vision 3 -------------------------------------------------------------------------- 09
Connecting to the XDV App------------------------------------------------------------------------- 13
Playing Back Your Content-------------------------------------------------------------------------- 14
Deleting Videos and Photos on Your Vision 3------------------------------------------------ 14
Transferring Your Data------------------------------------------------------------------------------- 14
Transferring Your Data to A Smartphone or Tablet --------------------------------------- 15
Adjusting the Zoom Level -------------------------------------------------------------------------- 17
Reformatting Your Memory Card ---------------------------------------------------------------- 17
Maintaining Your Camera --------------------------------------------------------------------------- 17
Maximizing Battery Life ------------------------------------------------------------------------------ 18
Battery Handling and Storage --------------------------------------------------------------------- 18
Remote ----------------------------------------------------------------------------------------------------- 19
Mounting Your Camera ------------------------------------------------------------------------------ 21
Contact Us------------------------------------------------------------------------------------------------- 23
EN

2
󾙕
󾙓
Waterproof
Housing x 1
Battery Charger
x 1
Battery
x 2
USB Cable
x 1
Remote Control
x 1
Remote Control
Strap x 1
C Mount
x1
Buckle Mount
x1
J-Hook Mount
x1
A Mount
x1
D Mount
x1
Helmet Mount 2
x 1
E Mount
x1
H Mount
x 1
Helmet Mount 1
x 1
F Mount
x1
Bandage
x 4
Tether
x 5
Lens Cloth
x 1
Double-Sided
Adhesive Tape x 2
Quick Start
Guide x 1
Clip 1
x 1
Protective
Backdoor x 1
Clip 2
x 1
What's in the Box
EN

3
Shutter / Select Button
Wifi indicator
Power / Mode / Exit Button
USB Port
Memory Card Slot
Micro HDMI Port
Lens
1
2
3
4
5
7
6
4
7
5
6
1
3
2
Your Vision 3
EN

4
Note: The camera will not record audio when it is in the waterproof case.
14
8
11
12
13
9
10
Screen
Charging Indicator
Working Indicator
Up Button / Wifi Button
Down Button
Speaker
Battery Cover
8
9
11
12
13
14
10
EN

5
Getting Started
Welcome to your new Vision 3 action camera. To capture videos and photos, you will
need a memory card (sold separately).
Memory Card Use
Use brand name memory cards that meet these requirements:
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32)
Note:
1. Before using this camera, please format the memory card first. To keep your
memory card in good condition, reformat it on a regular basis. Reformatting
deletes all of your data, so be sure to transfer your photos and videos first.
2. The FAT32 format memory card will stop recording when the storage of each file
exceeds 4GB and start to record again in a new file.
3. Using a memory card with a capacity larger than what is required can lead to
complications such as failure to recognize the card. In addition, it may cause
camera malfunctions, including unresponsiveness or firmware failure.
Powering On or Off
To Power On:
Press and hold the Power button for 3 seconds. You will hear a beep and see the
working indicator turn on. Once information appears on the display screen, you'll
know that your camera is turned on.
To Power Off:
Press and hold the Power button for 3 seconds. The camera will power off with the
working indicator turned off.
Turning Wifi on or Off
To turn on Wifi, first turn on the camera, then press and hold the Wifi button. You
can also enter the camera's system settings screen to turn on Wifi.To turn off Wifi,
simply short-press the Wifi button.
EN

6
Switching Modes
To switch modes, first make sure the camera is turned on, then short-press the
Mode button.To exit the mode, simply short-press the Mode button again.
Start Recording
When the camera is set up, press the Shutter button to start recording. The working
indicator will be flashing slowly. To stop recording, simply press the Shutter button
again.
Charging
To charge your camera, please plug it in with the included USB cable. The charging
indicator will turn red and remain on. It will black out when fully charged. Tip: The
battery can last up to 70 minutes of 4K video recording when fully charged.
Overviews of Modes
There are 8 modes of this camera: Video, Photo, Slow Motion, Playback, Video
Settings, Photo Settings, General Settings, and System Settings.
4K30FPS
01/10/2023 10:09:23
TF
Video Mode
The camera is in Video mode by default
when it's turned on. In Video Mode, press
the Shutter button to start recording. To
stop recording, simply press the Shutter
button again.
EN

7
Photo Mode
To enter Photo mode, first turn on the
camera, then press the Mode button
once. In Photo Mode, press the Shutter
button to take a photo.
Slow Motion Mode
To enter Slow Motion mode, first turn on
the camera, then press the Mode button
twice.
In Slow Motion mode, you can press the
Shutter button to record a slow motion
video at the set resolution.
Playback Mode
To enter Playback mode, first turn on the
camera, then press the Mode button 3
times. In Playback mode, you can press
the Up/ Down button to select a video or
photo file for playback.
16M 4373
01/10/2023 10:11:23
TF
720P120FPS 14.4G
01/10/2023 10:13:23
TF
00001 /04372
01/10/2023 10:11:23
EN

8
Video Settings Mode
To enter Video Settings mode, first press
the Mode button several times till you see
a gear icon show on the screen, then
press the OK button. You will be able to
access the video settings screen. On this
screen, you're free to change the video
settings.
Photo Settings Mode
After accessing the video screen screen,
you can press the Mode button to enter
Photo Settings mode. On the photo
settings screen, you're free to change the
photo settings.
General Settings Mode
After accessing the photo settings
screen, you can press the Mode button
to enter General Settings mode. On the
general settings screen, you're free to
change the general settings.
Video Resolution
Recording Sound
Time-Lapse Video Close
Close
720P 120FPS
Loop Recording
Slow Motion
4K 30FPS
Photo Resolution
Timed
Auto Close
Close
CloseDrama Shot
16M
Exposure
White Balance
Wifi
Auto
Image Rotation
Driving Mode
0
EN

9
Customizing Your Vision 3
Video Settings
On the video settings screen, press the Down button to choose a setting from the
available options, then press the OK button to confirm your selection and change
the setting.
1. Video Resolution
4K 30FPS/2.7K 30FPS/1080P 60FPS/1080P 30FPS/720P 120FPS/720P 60FPS/720P
30FPS (Default setting: 4K 30FPS)
This camera is capable of recording video up to 4K30fps. The higher resolution, the
greater clarity and detail, thus the larger the file.
2. Recording Sound
On / Off (Default: On)
When "Recording Sound" is disabled, the camera will record video without audio.
3. Time-lapse
Close/0.5s/1s/2s/5s /10s/30s/60s (Default setting: Close)
This option lets you specify the frequency at which the video frames are captured
and compiled in Time-Lapse mode.
Note: Time-lapse video is captured without audio.
4. Loop Recording
Close/1min /3 min /5 min (Default setting: Close)
Loop Recording allows your camera to overwrite old files with new ones. Once the
System Settings Mode
After accessing the general settings
screen, you can press the Mode button to
enter System Settings mode. On the
system settings screen, you're free to
change the system settings.
Language
Date-Time
Format
Reset To Factory Settings
Firmware Version
English
EN

10
memory card is full, the camera will delete the first video file to make room for the
latest one. For instance, if you select the "1min" option, the camera will create
1-minute video clips, and the oldest video clip will be deleted when the camera
requires more space.
5. Slow Motion
720P 120FPS/1080P 60FPS (Default setting: 720P 120FPS)
The camera will record slow motion video at the set resolution. The video footage
will appear to be in slow motion when played back. Note: Slow Motion video is
captured without audio.
6. Image Stabilization
On/Off (Default setting: Off)
This feature can efficiently smooth out the lens shakes, resulting in smooth and
clear videos.
Photo Settings
On the photo settings screen, press the Down button to choose a setting from the
available options, then press the OK button to confirm your selection and change
the setting.
1. Photo Resolution
20M /16M / 12M / 8M / 5M / 2M (Default setting: 20M)
This camera is capable of capturing 20MP photos. The higher resolution, the greater
clarity and detail, thus the larger the file.
2. Timed
Close / 3s / 5s / 10s / 20s (Default setting: Close)
This option lets you set the countdown time. The camera will take a photo after the
set time. This feature is ideal for you to take a selfie.
3. Auto
Close / 3s / 10s / 15s / 20s / 30s (Default setting: Close)
This option lets you specify the frequency at which the photo is taken. For instance,
if you select the "3s" option, a photo will be taken automatically every 3 seconds.
4. Drama Shot
Close, 3P/s, 5P/s, 10P/s (Default setting: Close)
Drama Shot (Burst Photo) lets you specify the number of consecutive shots per
EN

11
second, making it ideal for capturing fast-moving activities.
General Settings
On the general settings screen, press the Down button to choose a setting from the
available options, then press the OK button to confirm your selection and change
the setting.
1. Exposure
-3 / -2 / -1 / 0 / 1 / 2 / 3 (Default setting: 0)
By default, your camera utilizes the entire image to ascertain the optimal exposure
level. This feature proves particularly beneficial when capturing shots where a
crucial region may otherwise be excessively over- or underexposed. Upon adjusting
this setting, the display promptly reflects the impact on your image. It's important to
note that if you change the mode, the camera will return to employing the entire
image for determining the correct exposure level.
2. White Balance
Auto / Sunny /cloudy / Incandescent / Fluorescent (Default setting: Auto)
White Balance can adjust the color temperature of videos and photos, make it
perfect for use cool or warm lighting conditions. Upon adjusting this setting, the
display promptly reflects the impact on your image.
3. Wifi
Off / On (Default setting: Off)
You can choose to enabled Wifi in this setting.
Tip: You can also press and hold the Wifi button to turn on Wifi in Video or Photo
Mode. The camera will then enter Wifi mode and display the Wifi information.
4. Image Rotation
Off / On (Default setting: Off)
This setting determines the orientation of your video and photos, helping to prevent
upside down footage.
Note: The user interface will be upside down when this feature is enabled.
5. Driving Mode
Off / On (Default setting: Off)
In this mode, the camera will automatically record video and save the video file
when you connect it to the cigarette lighter and start your car engine.
EN

12
6. Light Source Frequency
Auto / 50Hz / 60Hz (Default setting: Auto)
You can set the light source frequency to avoid the “water ripples” phenomenon
(light waves) while capturing indoors.
7. LED Indicator Light
Off / On (Default setting: Off)
If you choose to turn this setting off, the indicator light will not turn on when the
camera is working or is charging.
8. Auto Screensaver
Close / 10s / 20s / 30s (Default setting: 30s)
Auto Screensaver turns off the LCD display after a period of inactivity to save battery
life. To turn the display back on, simply press any button of the camera.
9. Auto Shutdown
Closed/1 min/3 min/ 5 min (Default setting: 3 min)
Auto Shutdown will power off your Vision 3 after a period of inactivity to save battery
life.
10. Time Watermark
Off / On (Default setting: On)
With this setting enabled, a watermark will be added to the video or photo.
System Settings
On the system settings screen, press the Down button to choose a setting from the
available options, then press the OK button to confirm your selection and change
the setting.
1. Language
简体中文, 繁體中文, English, 日本語, Deutsch, Français, Italiano, Español, Português,
Русский, 한국어 (Default setting: English)
You can choose the system language for your Vision 3 action camera.
2. Date-Time
YYYY-MM-DD, HH-MM-SS
In this setting, you can manually set the camera's date and time.
EN

13
Connecting to the XDV App
You can control your camera to capture photos and videos using the phone app. To
do this, please download and install the XDV App on the App Store or Google Play
first. When your camera is connected to the APP, you can control it to capture, or
change the camera's settings using your phone. You can also live preview, playback,
download, and edit videos via this APP. Please follow the instructions below to
connect your camera to the APP.
1. Turn on the camera, then press and hold the Wifi button to turn on Wifi. The
camera will enter Wifi mode and display the Wifi information.
2. Turn on your phone’s Wifi to enter the Wifi settings page, find the Wifi SSID named
"Vision3_****" in the list and tap on it, then enter the password 1234567890 for
connection.
Warm tip: Once the camera Wifi is connected, it will give you a "No Internet
Connection" or “Weak Security” notice since your phone's 4G signal is blocked.
You can ignore it and continue the APP connection.
3. Open the XDV App on your phone or tablet, and tap on the Wifi SSID again.
4. Your camera will be connected the APP in seconds.
Note: This camera does not support MacBook or iPad.
3. Format
Format memory card? Confirm / Cancel
To keep your memory card in good condition, reformat it on a regular basis.
Reformatting erases all of your content, so be sure to offload your photos and
videos first.
4. Reset to Factory
SettingsReset to Factory Settings? Confirm / Cancel
This option resets all settings to their default values.
5. Firmware Version
This option allows you to check the brand, model, and firmware version of your
camera.
EN

14
Playing Back Your Content
Deleting Videos and Photos on Your Vision 3
1. Enter Playback Mode.
2. Press the Up or Down button to scroll through the video or photo files.
3. Press and hold the OK button for 3 seconds. The screen will display "Delete this
file / Confirm / Cancel".
4. Press the Up button followed by the OK button, and the selected file will be
deleted.
5. To exit Playback Mode, press the Mode button.
Transferring Your Data
Transferring Your Data to A Computer
To play back your videos and photos on a computer, you must first transfer these
files to the computer. Transferring also frees up space on your memory card for new
content. To download files to a computer using a card reader (sold separately),
please insert a memory card into your card reader, then connect the card reader to
the computer via a USB port. You can then transfer files to your computer or delete
selected files by using the file explorer.
You can play back your content on the camera, your computer, TV, smartphone or
tablet. You can also play back content by inserting the memory card directly into a
device, such as a computer or a compatible TV. With this method, playback resolution
depends on the resolution of the device and its ability to play back that resolution.
Note: To play back your videos and photos on a computer, you must first transfer
these files it. Transferring also frees up space on your memory card for new content.
Viewing Videos and Photos on Your Vision 3
1. Turn on your camera, then press the Mode button 3 times to enter Playback mode.
2. Press the Up or Down button to scroll through the video or photo files.
3. After selecting the file you want to view, press the OK button. And the file will play.
EN

15



󾙙󾙔󾙒󾙛󾙒󾙓󾙔󾙒
󾙙󾙔󾙒󾙛󾙒󾙓󾙔󾙒󾙓󾙒󾙚󾙒󾙘󾙒

󾙔󾙒󾙓󾙚󾙓󾙒󾙓󾙓󾙓󾙔󾙔󾙕󾙖󾙘



Available:29.67G Total:28.74G
Phone Device
󾙔󾙒󾙓󾙚󾙓󾙒󾙓󾙓󾙓󾙛󾙓󾙒󾙗󾙛󾙖
󾙔󾙙󾙘󾙗
󾙔󾙒󾙓󾙚󾙓󾙒󾙓󾙓󾙓󾙛󾙖󾙕󾙔󾙒
󾙗󾙗󾙙󾙖󾙘
󾙔󾙒󾙓󾙚󾙓󾙒󾙓󾙓󾙓󾙛󾙓󾙒󾙖󾙘󾙖
󾙖󾙔󾙕󾙔
Transferring Your Data to A Smartphone or Tablet
1. Open the XDV App, and connect it to your camera.
2. Tap the Media icon at the bottom of the screen.
3. Tap "Device" at the top of the screen to view all the video and photo files.
EN

16



Available:29.67G Total:28.74G
Phone Device
󾙔󾙒󾙓󾙚󾙓󾙒󾙓󾙓󾙓󾙛󾙓󾙒󾙗󾙛󾙖
󾙔󾙙󾙘󾙗
󾙔󾙒󾙓󾙚󾙓󾙒󾙓󾙓󾙓󾙛󾙖󾙕󾙔󾙒
󾙗󾙗󾙙󾙖󾙘
󾙔󾙒󾙓󾙚󾙓󾙒󾙓󾙓󾙓󾙛󾙓󾙒󾙖󾙘󾙖
󾙖󾙔󾙕󾙔


󾙕󽘀
Available:29.67G Total:28.74G
Download Cancel
󾙔󾙒󾙓󾙚󾙓󾙒󾙓󾙓󾙓󾙛󾙓󾙒󾙗󾙛󾙖
󾙔󾙙󾙘󾙗
󾙔󾙒󾙓󾙚󾙓󾙒󾙓󾙓󾙓󾙛󾙖󾙕󾙔󾙒
󾙗󾙗󾙙󾙖󾙘
󾙔󾙒󾙓󾙚󾙓󾙒󾙓󾙓󾙓󾙛󾙓󾙒󾙖󾙘󾙖
󾙖󾙔󾙕󾙔
Notes:
1. If you cannot download videos or photos to your iPhone via the app, please enter
your phone’s Settings page → Privacy→ Photos, find "XDV", and select "All photos".
2. You cannot download 4K or 2.7K videos to an iPhone or iPad via the XDV App.
Please transfer these videos via a card reader.
4. Tap followed by to select the file you want to download.
5. Tap "Confirm" in the bottom right corner, and wait for the download process to
finish. The file will be saved to the album of your phone or tablet.
EN

17
Maintaining Your Camera
Follow these guidelines to get the best performance from your camera:
1. For best audio performance, shake the camera or blow on the mic to remove dust
or ash before use.
2. To clean the lens, wipe it with a soft lint-free cloth. Do not clean the lens with
anything else.
3. Do not touch the front lens directly with your fingers.
4. Keep the camera away from drops and bumps which may cause damage to the
parts inside.
5. Keep the camera away from high temperatures and strong sunlight to avoid
damage.
Adjusting the Zoom Level
The Zoom function can be used to adjust how close or far away the subject appears
in your photo. The default setting is no zoom. The Zoom function is available in Video
and Photo Mode. This camera supports up to 4X zoom. Please follow the steps below
to zoom in or out.
1. Turn on the Vision 3 action camera.
2. Enter Video or Photo mode.
3. Press the Up or Down button to adjust the zoom level.
Reformatting Your Memory Card
To keep your memory card in good condition, please reformat it on a regular basis.
Reformatting deletes all of your content, so be sure to transfer your photos and
videos first. Please follow the steps below to format the card.
1. Turn on the Vision 3 action camera.
2. Enter the system settings screen.
3. Press the Down button to find the "Format" option.
4. Press the OK button. The screen will show "Format memory card? Confirm / Cancel".
5. Press the Up button followed by the OK button. Your memory card will be
formatted successfully.
EN

18
Maximizing Battery Life
If battery power reaches 0% while recording, the camera will save the file and power
off. To maximize battery life, please follow the guidelines where possible:
• Turn off wireless connections
• Capture video at lower frame rates and resolutions
• Use the Screen Saver setting.
Battery Handling and Storage
The camera contains sensitive components, including the battery. Avoid exposing
your camera to very cold or hot temperatures. Low or high temperature conditions
may temporarily shorten the battery life or cause the camera to temporarily stop
working properly. Avoid dramatic changes in temperature or humidity when using
the camera, as condensation may form on or within the camera.
Do not dry the camera or battery with an external heat source such as a microwave
oven or hair dryer. Damage to the camera or battery caused by contact with liquid
inside the camera is not covered under the warranty.
Do not store your battery with metal objects, such as coins, keys or necklaces. If the
battery terminals come in contact with metal objects, this may cause a fire.
Do not make any unauthorized alterations to the camera. Doing so may compromise
safety, regulatory compliance, performance, and may void the warranty.
WARNING: Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate or paint the camera or battery. Do not insert foreign objects
into the battery opening of the camera. Do not use the camera or battery if it has
been damaged; for example, if it is cracked, punctured or damaged by water.
Disassembling or puncturing the battery can cause an explosion or fire.
EN

19
Remote
Photo Button
Video Button
Splashproof only, not waterproof.
CR2032 Battery Replacement for Vision 3 Remote
1. Use a 1.8 mm Phillips head screwdriver to remove the four screws on the back
cover of the remote, allowing you to open it.
When the camera is turned on, it will be automatically connected to the remote. You
can control the camera to take photos or record videos using the remote.
Video
To record video, first make sure the camera is in Video mode.
To start recording, simply press the gray video button. The camera will emit one
beep with the working indicator light flashing.
To stop recording, simply press the gray video button again. The camera will emit
one beep with the working indicator light turned off.
Photo
To capture a photo, first make sure the camera is in Photo mode, then press the
video button. The camera will emit a camera shutter sound.
EN