Dream On Me 398 User manual

Opening size:
Rectangle 1 – 48” x 62” x 28”
Opening size:
Rectangle 2 – 63.5” x 47” x 28”
Opening size:
Oval – 68” x 47” x 28”
Opening size:
Circle – 63” x 63” x 28”
Weight – 29.75 lbs
Dream On Me Inc.
1532 South Washington Ave ,Piscataway TWP, NJ 08854
Tel [phone] Fax [phone]
MADE IN CHINA
ITEM NO.: #398
Press the button to right to open the door.
INSTRUCTIONS
FEATURES
ASSEMBLE WAY
Baby playpen is assembled
with the special plug in connector.
You can assemble the playpen
shape as you like by adding or
removing the playpen panels.
Fun toys on the game panel. Care & Maintenance
1. Regular care and maintenance contribute to the safety and longevity
of your product. Environmental influences and outdoor storage could
cause corrosion.Therefore, always store your baby playpen indoors.
Do not keep the product in a damp, cold, or hot place.
2. We recommend regular maintenance of the frame. Use a damp cloth
and mild detergent to wipe away the dirt. Do not use abrasives or solvents.
3. Never force any folding or adjustable parts.
4. Ensure that all panels are correctly engaged before use.
5. Regularly check unit to ensure that no parts are loose or broken.
6. Use only spare parts which are supplied by the manufacturer.
The use of non original spare parts can compromise the product safety.
7. Do not use the product if components are not assembled and fitted
properly.
8. The product must always be positioned on flat surfaces.
Do not use it on sloping surfaces.
9. Keep away from fires.
10. Do not move the product while the baby is sitting in it.
Watch your fingers when
assembling the playpen
There are four angles of the
playpen connector: 180°,150°,
120°, 90°.
Thank you for choosing Dream On Me and congratulations on joining The DOM Family, a family that has been transforming
lives for 30 years! We appreciate your feedback and wish you the very best in the coming years with your new addition. If you
have any questions or concerns please don’t hesitate to reach out and a trusted DOM representative will assist you. Thank
you again for entrusting us to supply you with the safest, functional and affordable baby products and accessories. Feel free
to follow us on Facebook and Instagram for further opportunities and offers.
Peg
Hole
•ALWAYS install and use gate as directed, using all the required
parts.
•NEVER use the gate to keep child away from pool.
•Use only with locking mechanism securely engaged.
•STOP using when child can climb over or dislodge the gate.
•Install with the side with lock button of door panel AWAY from child.
•To prevent falls, NEVER use at top of stairs, or in middle of stairs.
ALWAYS use the product on flat floor.
Game panel X1 Door panel X1 Small panel X10
Dimensions of each panel: Game/Door - 31.5” x 1.25” x 28”, Small Panel - 15” x 1.5” x 28”
On one side of each panel, there are 2 pegs (1 upper and 1 lower) and on the
other side there are 2 holes (1 upper and 1 lower). Line up the upper peg with
the upper hole and the lower peg with the lower hole, and insert both pegs in
at the same time. Repeat with each panel as required.
Comes with toys on the Game panel to keep your child entertained.
Comes with a rubber base at the bottom for steadiness. P lease
ensure that the rubber stoppers are attached properly.
Please c heck to make sure that all of the
following parts listed are included in the
box when opened. If there are any missing
parts, please contact Dream On Me before
using the product.