DS18 ATS10K User manual

OWNER’S MANUAL

FEATURES
Power Capability for Jump Start 12 Volt Vehicle. Can Start Gasoline
Car under 3.0L
4 in 1 Mobile Phone Connector
1 x Battery Metal Clamps
USB Charging Port Up To 2A. Supply Power for Mobile, MP3 / MP4,
PSP, Camera and other Digital Devices
High Power S.O.S. LED FlashLight
SPECIFICATIONS
Capacity Bank: 10,000mAh
Input: 5V / 2A
Output: 5V / 2A for Mobile Devices
Output: 12V for Car Jump
Start Current: 200A
Peak Current: 400A
Lifetime: More than 3000 Cycles
Charging Time: 4 Hours
Operating Temp.: From -4 °F to 140 °F
Size: 135 x 78 x 20 mm
ACCESSORIES INCLUDED
1

GUIDED TOUR:
2
Jump Cable Connector
Power Input 5V-2A
High Power LED Flashlight
USB 5V - 2A
Bank Capacity Indicator
1
2
3
4
5
6
Power / Flashlight Button
Jump Cable Connector
1
Power Input 5V - 2AMP
2
High Power LED Flashlight
3
USB 5V - 2A4
Bank Capacity Indicator
5
Power / Flashlight Button
6
Use this Port ONLY to Connect the Jump Start Cable with the Clamps to Start a Car
Use this Port to Connect the Home or Car Adapter to Recharge the Device.
5 Watts LED Bulb with Strober Function and S.O.S Sequence.
Use this Port to Charge Your Mobile Device such as Cellphones, Cameras, MP3, MP4
Players and any other device with a USB port Charge Input up to 2Amp.
This LED Bar Indicates the Level of Battery Capacity of the Jump Start. 4 Bars
Indicate Full Capacity, 3 Bars Indicate Medium High Capacity; 2 Bars Indicate
Medium Low Capacity and 1 Bar Indicates Low Capacity; It’s time to
Recharge the Device.
Press once to Activate the Device in Order to use the USB Charger.
Press and Hold for 3 seconds to turn on Flashlight. Once the Flashlight is on, press
the button to change modes. To turn the flashlight Off Hold the button for 3 seconds.
FOR MORE INFORMATION PLEASE VISIT
WWW.DS18.COM