DTLITE DT7R BEAM User manual

1
BEAM MOVING HEAD
WEIGHT：17.5KG
COLOR TEMPERATURE:（8400K）
POWER: （200/230W）
DT7R BEAM
WEIGHT: 17.5KG
COLOR TEMPERATURE: (8400K)
POWER: (200/230W)
USER MANUAL

2
Item
Item ............................................................................................................................ 2
1. Product introduce ..................................................................................4
1.1 Fixture Size...................................................................................................... 4
2. Safety information............................................................................................. 4
2.1 Anti-high temperature ........................................................................................ 5
2.2 Burst Prevention ................................................................................................. 5
2.3 To prevent falling wounding ........................................................................... 5
2.4 UV protection and the bulb explosion ................................................................ 5
2.5 Prevention of electric shock ............................................................................... 6
2.6 to prevent burning or fire ................................................................................... 6
3. Packing and shipping .................................................................................... 6
3.1 packaging randomized accessories project ...................................................... 6
3.2 transport the protection locks...............................................................................7
3.3 device packaging ............................................................................................. 7
3.4 Unpacking........................................................................................................... 7
4. Installation standards ....................................................................................... 7
4.1 device fixed to the bracket ...................................................................................7
4.2 rigging installation ........................................................................................... 7
4.3 connected devices................................................................................................ 8
5. AC power................................................................................................................ 8
5.1 Fuse......................................................................................................................8
2
DT7R BEAM USER MANUAL

3
5.2 Power connection............................................................................................... 8
6. Lamp........................................................................................................................9
6.1 Bulb Description ............................................................................................. 9
6.2 changing a light bulb........................................................................................... 9
7. Control Panel.........................................................................................................9
7.1 Introduction...................................... ................................................................. .9
8. B200W reference ................................................................................................ 9
8.1 address code, XY axis control mode............................................................ 10
8.2 MODE control mode......................................................................................10
8.3 DISP Mode.....................................................................................................11
8.4 LAMP Mode .................................................................................................11
8.5 RESET mode.................................................................................................11
8.6 OPTO Mode .................................................................................................11
8.7 Channels introduction...................................................................................12
3
DT7R BEAM USER MANUAL

4
STATEMENT
The product is good packing when ship out the factory. All users should strictly abide by the
warnings and instructions stated in this manual, any damage and results due to misuse and the
neglect of this operating manual will be excluded from the deal responsibility this manual will not
informed in additionally if have technical changes.
DISPLAY PRODUCTION DESCRIPTION
Thank you for choose this B200 products, this model is the moving head light which is the latest
development of the smart, efficient products, beautiful shape, smooth R & D, combined with the
advanced technology of today's stage lighting products with international advanced electronic
control technology and excellent user-friendly industrial design , fully comply with CE standard,
accepted international standard DMX512 signal mode.
This moving head lights, use ceramic luminescent film reflector as a condenser system, coupled
with the high-quality optical lens components, broadband voltage, a clear pattern, sharp and
uniform output light efficiency. Intelligent LED display module, the English language selection
mode, intuitive operating menu, shortcut.
B200, have 16/20 international standard DMX512 channels optional Horizontal scan: 540 °
vertical scanning 270 °(16bit precision scanning) electronic correction, dot-matrix display, four
touch switch LCD + single-Key flying shuttle can spin. The can be inverted 180 °, the color wheel
is combined with white and 14 colors. Gobo wheel: 7 patterns + white effect round by eight prism
and atomization function. 0-100% mechanical dimmer, support mechanical strobe and variable
strobe effect, strobe macro function. The optical system of the lens group electric focusing, the
beam angle of 0 to 4 °with overheating protection function
Moving head lights are widely used in television, disco, dance halls, nightclubs, large-scale
performances and other professional venues
1. PRODUCT INTRODUCTION
1.1BEAM SIZE
Size：395（L）×287（W）×495（H）mm
Net Weight：17.5KG
2. SAFETY INFORMATION
Safety warning message
This product is only suitable for professional use, and does not apply to security for other purposes.
After you got the lights, please check the package whether have any damage caused by
transportation. If there is any damage, do not use this fixture, and please contact the dealer or
Thank you for choosing DT7R BEAM, this model is the moving head light which is the latest
development of the smart, efcient products, beautiful shape, smooth R & D, combined with the
advanced technology of today’s stage lighting products with international advanced electronic
control technology and excellent user-friendly industrial design , fully comply with CE standard,
accepted international standard DMX512 signal mode.
This moving head lights, use ceramic luminescent lm reector as a condenser system, coupled
with the high-quality optical lens components, broadband voltage, a clear pattern, sharp and
uniform output light efciency. Intelligent LED display module, the English language selection
mode, intuitive operating menu, shortcut.
DT7R BEAM has 16/20 international standard DMX512 channels optional Horizontal scan: 540°
vertical scanning 270° (16bit precision scanning) electronic correction, dot-matrix display, four
touch switch LCD + single-Key ying shuttle can spin. It can be inverted 180°, the color wheel
is combined with white and 14 colors. Gobo wheel: 7 patterns + white effect round by eight prism
and atomization function. 0-100% mechanical dimmer, support mechanical strobe and variable
strobe effect, strobe macro function. The optical system of the lens group has electric focus. The
beam angle is from 0 to 4°. Also, the system has overheating protection function.
Safety warning message
This product is only suitable for professional use.
After you got the xture, please check the package whether have any damage caused by
transportation. If there is any damage, do not use this xture, and please contact the ofcial dealer.
The package of the product is sealed based to all the appropriate regulations when shipped out of the
factory. All users should strictly abide by the warnings and instructions stated in this manual, any dam-
age and results due to misuse and the neglect of this operating manual will be excluded from the deal
responsibility this manual will not informed in additionally if have technical changes.
4
1.1 BEAM SIZE
DT7R BEAM USER MANUAL

5
manufacturer as soon as possible.
This product is only suitable for indoor, IP20 protection class. Lamps should be kept dry to avoid
Moisture, overheating or dusty environment. Prevent lamps come into contact with water or any
other liquid.
The use of this product should pay attention to: fire, heat, electric shock, ultraviolet radiation, the
lamp to explode or
Shedding caused serious or fatal injury.
Need to read the instructions before use energized or installing.
Follow through the operation of security methods and pay attention to the warning signs on the
specification and equipment. If you have any problem for how to safely operate the equipment.
Please contact your dealer.
2.1 ANTI-HIGH TEMPERATURE
Ta =40
Please don’t use the equipment if the temperature above 40℃
2.2 BURST PREVENTION
The lens should be changed if had damaged or any problems. Don’t change the
non-original manufacturer lens.
Len size：￠1136×60 mm
2.3 TO PREVENT FALLING WOUNDING
Please don’t move the package by one person only.
When Hang the fixture, please must verify that the facilities to be able to
withstand the weight of the lamps at least 10 times more.
Please make sure the Mounting hardware is strong enough no any damage, and
insurance for the safety rope as auxiliary security fixed in other facilities will
need to verify before installation. Installing or removing the equipment, to make
the pulley below the work location
2.4 UA PROTECTION AND THE BULB EXPLOSION
Prohibit straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any damage to rupture
5
2.1 ANTI-HIGH TEMPERATURE
2.2 BURST PREVENTION
2.3 TO PREVENT FALLING WOUNDING
2.4 UV PROTECTION AND THE BULB EXPLOSION
DT7R BEAM USER MANUAL
This product is only suitable for indoor use, IP20 protection class. Lamp should be kept dry to avoid
Moisture, overheating or dusty environment. Prevent lamps come into contact with water or any
other liquid.
The use of this product should pay attention to: re, heat, electric shock, ultraviolet radiation, the
lamp to explode or shedding caused serious or fatal injury.
Need to read the instructions before use or installation.
Follow through the operation of security methods and pay attention to the warning signs on the
specication and equipment. If you have any problem for how to safely operate the equipment.
Please contact your dealer.
The lens should be changed if had damaged or any problems. Don’t replace the original manufacturer
lens with other type. Lens size: Ø1136×60 mm
Please, use only authorized persons for unpacking.
When hang the xture, please verify that the facilities have loading ability at least 10 times more the
weight of the xture.
Please, install safety rope as auxiliary security before operation.

6
2.5 PREVENTION OF ELECTIC SHOCK
The electrical connection must only be carried out with corresponding qualifications;
Before installing, make sure you use the power voltage lamps must comply with the identified
power, voltage and have an overload or leakage protection;
Each lamp must be properly grounded, installed in accordance with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Prohibit the use of a lightning storm or wet environment.
2.6 TO PREVENT BURNING OR FIRE
1. Do not be mounted the light directly on the surface of ordinary combustible material.
2. Do not short-circuit temperature protection switch or fuse, use the specified type of fuse.
3. The equipment must be installed away from inflammable and explosive materials.
4. The equipment should be projected range of 3 meters away objects and projectiles
temperature less than 60 °C; ---- 3.0m.
5. Fan or ventilation, at least in the range of 0.5 meters can not be an obstacle.
6. Do not place any object on the lens.
7. Handling at least allow the device to cool for 20 minutes.
8. Do not replace the non-original parts.
3. PACKAGE
3.1 ATTACHMENT
Beam200 packed with fly-case of one in one ,two in one ,or carton box.
Attach follow accessory.
ACCESSORY
CONTENT QUANTITY
USER MANUL 1
SAFTY ROPE 1
HANG FIXTURE 2
SIGNAL CABLE 1
PACAKGE SIZE
CARTON BOX 410*490*600
FLY-CASE 1 IN 1 690*470*430
FLY-CASE 2 IN 1 985*450*735
DT7R BEAM packed with y-case of one in one, two in one, or carton box.
Attach follow accessory.
6
2.5 PREVENTION OF ELECTRIC SHOCK
2.6 TO PREVENT BURNING OR FIRE
3.1 ATTACHMENT
DT7R BEAM USER MANUAL
The electrical connection must only be carried out with corresponding qualications;
Before installing, make sure you use the right voltage (110-230V AC).
Cut off the power when install or replace the lamp and the fuse;
The use of this equipment during a lightning storm or in wet environment is prohibited.
1. Do not be mounted the light directly on the surface of ordinary combustible material.
2. Replace the main fuse only with the specied type.
3. The equipment must be installed away from inammable and explosive materials.
4. The moving head must be at least 3 meters away from the projected objects.
5. Fan or ventilation, at least in the range of 0.5 meters can not be an obstacle.
6. Do not place any object on the lens.
7. Handling at least allow the device to cool for 20 minutes.
8. Do not replace the non-original parts.

7
3.2 TRANSPORT PROTECT LOCK
In order to protect the light, there is a protect lock; During the transport , the lock will closed
keeping the item in safety state.
3.3 ABOUT PACK STAGE
1. Before packed, make sure power is off, and wait for at least 20mins for cooling down.
2. Before clean the fixture, make sure X, Y axis protect lock closed.
3. After packed by plastic bag, high-lift the fixture with two handles besides the product. put
the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock the
fly-case.
5. Fly-case only up stacked two layers. Prohibited upside down
6. When packed with carton box, equipment should be put into the foam first, then set into a
carton, pay attention to the vertical position.
3.4 UNPACKING
Note: Beforeunpacking check the damage is whether due to the transportation or not, if you find any
such damage, please do not use this item, and contact with the dealer or manufacturer as soon as
possible.
1. Open the fly-case, and discover the inside plastic bag.
2. High-lift the product by two handles beside the bottom base and move it out.
3. Before power on, make sure you have opened the X, Y axis lock!
4. INSTALL STRANDARD
4.1 INSTALL LOCK
B200 can be placed on the stage, or mounted in an arbitrary direction of the truss. Two fast locks
system could fix the item easily
4.2 EQUIPMENT FIXED
1. Before installation must verify the fast lock is keep in good state, and can withstand at
least 10 times the weight of product. Verify that the building can withstand at least 10
times of the total weight of the product and accessory equipments.
2. Fix the hang fixture into the hole, which located on the base of the price.
Seize handle of fasteners, clockwise rotate 1/4 turn and lock. Installed other one fastener
in the same method.
3. Using the safety cable which can withstand 10 times the weight of the equipment.
4. Make sure the X,Y protect locks are opened, Verify that within 3 meters there is no
combustibles .
DT7R BEAM can be placed on the stage, or mounted in an arbitrary direction of the truss.
Two fast locks system could x the item easily.
7
3.2 TRANSPORT PROTECT LOCK
3.3 ABOUT PACK STAGE
3.4 UNPACKING
4.1 INSTALL LOCK
4. INSTALL STANDARD
4.2 EQUIPMENT FIXED
DT7R BEAM USER MANUAL
In order to protect the light, there is a protect lock; During the transport, the lock will closed
keeping the item in safety state.
1. Open the ight case, and nd the plastic bag inside.
2. High-lift the product by two handles beside the bottom base and move it out.
3. Before power on, make sure you have opened the X, Y axis lock!
1. Before installation must verify the fast lock is keep in good state, and can withstand at
least 10 times the weight of product. Verify that the building can withstand at least 10
times of the total weight of the product and accessory equipments.
2. Fix the hang xture into the hole, which located on the base of the moving head.
Seize handle of fasteners, clockwise rotate 1/4 turn and lock. Installed other one fastener
in the same method.
3. Using the safety cable which can withstand 10 times the weight of the equipment.
4. Make sure the X,Y protect locks are opened, Verify that within 3 meters there is no
combustibles.
1. Before packed, make sure power is off, and wait at least 20mins for cooling down.
2. Before clean the xture, make sure X, Y axis protect lock closed.
3. After packed by plastic bag, high-lift the xture with two handles besides the product and put
the product into the ight-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock the
Flight-case.
5. Flight-case only up stacked two layers. Prohibited upside down.
6. When packed with carton box, equipment should be put into the foam rst, then set into a
carton, pay attention to the vertical position.

DT7R BEAM USER MANUAL
8
WARNING
Fixture must use twofixing devices, and make sure the fixing device have locked! And only
fully clockwise rotate 90 °can lock the hang fixture! Do remember plus a safety rope, and
do not connect the safety rope to plastic handle. It should be connect to the hole on the base!
4.3 FIXTURE CONNECT
Attention! One product only can accept one input one output.
B200 DMX cable include 3 contact pins:
Pin 1, FOR GROUND; Pin 2 connected to the negative polarity signal; The pin
3connected to the positive polarity signal.
DMX512 cable must use the professional shielded twisted pair cable; standard
loudspeaker cable is not reliable to control the long-range data. 24AWG cable is
suitable for more than 300 meters long-distance signal transmission and must add\
DMX 512 signal amplifier.
Do not use two outputs to separate the connection, if separate a continuous connection
to branch, DMX512 splitter is necessary.
Attention! Do not overload the connection. One continuous connection can only
connect up to 32 devices.
If use the DMX512 splitter. At first connect DMX512 Splitter input terminal to
controller .And then connected from the splitter output terminal to next device.
Do as above guide to connect other device, and finally coupled with terminal insertion
5. ALTERNATING CURRENTPOWER SUPPLY
5.1 VOLTAGE, POWER, FUSE SPECIFICATION
Input Voltage Total Power Frequency
110~240V 230W 50/60HZ
Fuse voltage Electronic current Specification
250V 6A 5×20
5.2 POWER PROTECT
The equipment must be operated by professionals; Make sure that the voltage of
power supply must be comply with the voltage identified on the lamp, and must have
an overload or leakage electrical protection.
ATTENTION!
Factory has equipped the standard 3 pin plug socket. Connect the power supply as
DT7R BEAM’s DMX cable include 3 contact pins:
Attention! Do not overload the connection. One continuous connection can only
connect up to 32 devices.
If use the DMX512 splitter. At rst connect DMX512 Splitter input terminal to
controller. Then connect from the splitter output terminal to next device.
Do as above guide to connect other device, and nally coupled with terminal resistor
110 Ohm.
8
4.3 FIXTURE CONNECT
5.1 VOLTAGE, POWER, FUSE SPECIFICATION
5.2 POWER PROTECT

DT7R BEAM USER MANUAL
9
below table.
If lamp cable is damaged, replacement should be operate by factory or qualified
staff. Any question, please contact professionals or talk to a qualified electrician.
Live wire(L) Null(N) Ground wire
RED BLUE Yellow +Green
6. LAMP
6.1 LAMP DESCRIPTION
LAMP MODEL POWER OF LAMP LIFE/HOUR COLOR TEMPERATURE
Philips UHP 189 W2000 HOUR 8000K
YODN 5R 200 W/230W 2000 HOUR 8000K
WARNING! There is a safety hazard or damage if install similar bulb
To reduce the risk of damage to light ,do change the lamp before using
time over 125% of lamp life .
6.2 LAMP REPLACE
Attention! When replace the lamp is forbidden to touch lamp with bare hand, to
avoid the greasy dirt stains filament. filament must be kept clean
1. Disconnect the power. Before replace lamp, fixture need 20 minutes for lamp
cooling. Fasten the head with Y axis protect lock in 60 °position.
2. Use cross screwdriver to open the light body cover, remove the fan bracket,
pull out the bulb cable
3. Open stainless steel tablet holder with one hand and the use other hand to pull
out the bulb at oblique 15 °
4. Install the lamp
7. CONTROL PANEL
7.1 CONTROL PANEL INTORUCTION
POWER SIGNAL
LIGHT
DMX SIGNAL
LIGHT
DISPLAY SCREEN
BUTTON
WARNING! Please use ONLY the recommended type of lamps.
To reduce the risk of damage to light, please change the lamp before the using
time is over 125% of lamp life.
YODN 7R 230W
9
6.1 LAMP DESCRIPTION
6.2 LAMP REPLACE
7.1 CONTROL PANEL INTORUCTION

10
8. BEAM2OOW CONTROL
8.1 DMX ADDRESS AND X,Y AXIS CONTROL
A001 DMX address：001
Rpan: X axis reverse
ON X axis reverse on
OFF X axis reverse off
Rtil: Y axis reverse Click “up”button to enter this model, “E”button
confirm. Click “up”and “down”button to
adjust state. Press “E”for confirm
ON Y axis reverse on
OFF Y axis reverse off
8.2 MODE CONTROL
MODE CONTROL Click “up”button to enter this model, “E”button
confirm, click “up”and “down”button to adjust state.
Press “E”for confirm
DMX DMX MODE
DIS1:16CH
DIS2:20CH
DIS3: Advanced
AUTO AUTO
SOUD SOUND
Press E button enter the DMX address set. Click “up”and
“down”button to adjust 0-255 address. Press “E”saved
Click “up”button to enter this model, “E”button
confirm. Click “up”and “down”button to adjust
state. press “E”for confirm
DT7R BEAM CONTROL
10
8.1 DMX ADDRESS AND X,Y AXIS CONTROL
8.2 MODE CONTROL
DT7R BEAM USER MANUAL