Kettle panels
Instruction manual
1 2 3
Unplug and empty the kettle.
Ensure it has cooled down to
room temperature. Risk of
scalding and electric shock.
CAUTION! Edges may be sharp. Use and clean with care.
Using a Phillips screw driver (PH2),
unscrew and remove the lid and
body panels.
NB. Do not operate the kettle
with the panels removed.
Align the new panel with the
screw holes on the lid of the
kettle. Loosely screw both
screws into position. Tighten
to secure.
UNPLUG UNSCREW
4 5 6
Align the new panel with the
screw holes on the body of the
kettle and tighten the rst screw.
Ensure panel is fully located
into recess.
Align and tighten the second
screw.
LID PANEL
BODY PANELS TIGHTEN
LOCATE PANEL
Dualit Limited County Oak Way Crawley West Sussex RH11 7ST
GB-C
