dun-bri GROUP DBG 708.605 User manual

AHD Mobile DVR User Manual
~ 1 ~
AHD MOBILE DVR
User Manual

AHD Mobile DVR User Manual
~ I ~
Catalogue
Chapter 1 Overview .................................................................................................................. 1
Chapter 2 Quick setup ............................................................................................................. 1
1
．
Device Installation .......................................................................................................... 1
2. User Login .......................................................................................................................... 1
3
．
Set up the Syste ti e .................................................................................................. 2
4
．
Set up ca eras ................................................................................................................ 2
5
．
Wizard ................................................................................................................................ 3
5.1 Vehicle Infor ation setup ...................................................................................... 3
5.2 DiskManage ent ..................................................................................................... 4
5.3 3G/4G Setup .............................................................................................................. 4
5.4 WIFI Setting ............................................................................................................... 4
5.5 Server setting ............................................................................................................ 5
5.6 NetState ...................................................................................................................... 5
Chapter 3 Syste Menu .......................................................................................................... 6
1.1 Video Playback ......................................................................................................... 6
1.2 Video Backup ............................................................................................................ 7
2
．
Basic Setting .................................................................................................................... 8
2.1 Date Ti e setting ..................................................................................................... 8
2.2 Vehicle Infor ation .................................................................................................. 8
2.3 Preview setting ......................................................................................................... 9
2.4 Video Output ............................................................................................................. 9
2.5 On/Off setting .......................................................................................................... 10
2.6 Syste setup .......................................................................................................... 11
2.7 Syste Infor ation ............................................................................................... 11
3
．
Network setup ................................................................................................................ 11
3.1 Server setup ............................................................................................................ 12
3.2 3G/4G Setup ............................................................................................................ 12
3.3 WIFI setting .............................................................................................................. 13
3.4 Network State .......................................................................................................... 14
4
．
Recording Setup ............................................................................................................ 14
4.1 Recording Mode setting ....................................................................................... 14
4.2 Main Strea ............................................................................................................. 15
4.3 Sub Strea .............................................................................................................. 15
4.4 Recording storage ................................................................................................. 16
4.5 Recording OSD (On Screen Display) ................................................................ 16
4.6 I age setting........................................................................................................... 17
4.7 Mirror setting........................................................................................................... 17
5
．
Advanced setting .......................................................................................................... 17
5.1 User Manage ent .................................................................................................. 18
5.2 Driving Habits onitoring ................................................................................... 18
5.3 UART setting ........................................................................................................... 18

AHD Mobile DVR User Manual
~ II ~
5.3.1 UART-TTS ............................................................................................................. 19
5.3.2 UART-Serial Net (Pass Through) .................................................................... 19
5.4 Reverse Ca era ..................................................................................................... 19
5.5 NetTextShow ........................................................................................................... 20
6
．
Device Maintenance ..................................................................................................... 21
6.1 Log Inquiry............................................................................................................... 21
6.2 Disk Manage ent .................................................................................................. 22
6.3 Related with the Para eter ................................................................................. 22
6.4 Syste upgrading ................................................................................................. 22
7
．
Alar setting .................................................................................................................. 23
7.1 Input Alar .............................................................................................................. 23
7.2 Alar Out setting .................................................................................................... 24
7.3 Video Loss ............................................................................................................... 25
7.4 Fatigue Driving Alar ........................................................................................... 25
7.5 OverSpeedAlar .................................................................................................... 26
7.6 DiskError .................................................................................................................. 26
Chapter 4 Installation Warnings .......................................................................................... 27

Chapter 1 Overview
is a DVR designed for Analog HD vehicle monitoring. ith built
image processor and advanced H.264 video compression technology, it provides AHD
video recording, storage and playback solution. It has built
(optional) for remote monitoring, analysis and management. It comes with smart power
manageme
nt system which can recognize the power type automatically.
the battery’s voltage is lower than the gaven value, the device will shutdown automatically
and keep ultralow standby consumption.
Chapter 2 Quick setup
1．
Device Installation
Please refer to “AHD MOBILE DVR Hardware User Manual ” for the hard disk installation
and cables connection.
2. User Login
Right click the mouse, you will call out the login interface, please input your UserName,
Password, and select y
our language, click “OK” to login the menu. (The default UserName
is admin, without Password), see as following:
Right click the mouse, select “Menu” to start setup in the menu, see as following:
AHD Mobile DVR User Manual
~ 1 ~
Chapter 1 Overview
is a DVR designed for Analog HD vehicle monitoring. ith built
-
in high performance
image processor and advanced H.264 video compression technology, it provides AHD
video recording, storage and playback solution. It has built
-
in 3G/4G/ iFi module
(optional) for remote monitoring, analysis and management. It comes with smart power
nt system which can recognize the power type automatically.
the battery’s voltage is lower than the gaven value, the device will shutdown automatically
and keep ultralow standby consumption.
Chapter 2 Quick setup
Device Installation
Please refer to “AHD MOBILE DVR Hardware User Manual ” for the hard disk installation
Right click the mouse, you will call out the login interface, please input your UserName,
our language, click “OK” to login the menu. (The default UserName
is admin, without Password), see as following:
User Login Interface
Right click the mouse, select “Menu” to start setup in the menu, see as following:
AHD Mobile DVR User Manual
in high performance
image processor and advanced H.264 video compression technology, it provides AHD
in 3G/4G/ iFi module
(optional) for remote monitoring, analysis and management. It comes with smart power
nt system which can recognize the power type automatically.
hen detected
the battery’s voltage is lower than the gaven value, the device will shutdown automatically
Please refer to “AHD MOBILE DVR Hardware User Manual ” for the hard disk installation
Right click the mouse, you will call out the login interface, please input your UserName,
our language, click “OK” to login the menu. (The default UserName
Right click the mouse, select “Menu” to start setup in the menu, see as following:

“Menu” is the primary
menu of the system setup and control, see as following:
3．
Set up the Syste ti e
Path: Basic-
>DateTime, see as following:
TimeSYNC: Date and Time can be synchronized with GPS/BD
4．
Set up ca eras
Path: Menu->Record->
Mode. Please set up your cameras’ SignalType, Valid/Invalid. The
DVR works with both AHD and general cameras. If you use AHD cameras, please select
the first Type, if you use general cameras, please select the third Type, if you use both of
AHD Mobile DVR User Manual
~ 2 ~
Figure 1. System Menu
menu of the system setup and control, see as following:
Figure 2. Primary Menu
Set up the Syste ti e
>DateTime, see as following:
Figure 3. System date and time
TimeSYNC: Date and Time can be synchronized with GPS/BD
Set up ca eras
Mode. Please set up your cameras’ SignalType, Valid/Invalid. The
DVR works with both AHD and general cameras. If you use AHD cameras, please select
the first Type, if you use general cameras, please select the third Type, if you use both of
menu of the system setup and control, see as following:
Mode. Please set up your cameras’ SignalType, Valid/Invalid. The
DVR works with both AHD and general cameras. If you use AHD cameras, please select
the first Type, if you use general cameras, please select the third Type, if you use both of

general and AHD
cameras, please select the second Type. See as following:
PS: If your cameras don’t display image on the monitor, please check this setup.
5．Wizard
Path: Menu-
> izard. This izard will help you to quick set up the
server.
5.1
Vehicle Infor ation setup
Figure 6.
The DVR is using “Device ID” to connect with the server, so please input the correct
AHD Mobile DVR User Manual
~ 3 ~
cameras, please select the second Type. See as following:
Figure 4. Recording setting
Figure 5. SignalType setup
PS: If your cameras don’t display image on the monitor, please check this setup.
> izard. This izard will help you to quick set up the
device connect with the
Vehicle Infor ation setup
Figure 6.
Vehicle information setup
The DVR is using “Device ID” to connect with the server, so please input the correct
cameras, please select the second Type. See as following:
PS: If your cameras don’t display image on the monitor, please check this setup.
device connect with the
The DVR is using “Device ID” to connect with the server, so please input the correct

DeviceID which was registered on the server for your device. The user can modify
VehicleName and PlateNumber according to their requirement. The PlateNumber is the
vehicle’s plate number, and it will be displayed in the video.
5.2
DiskManage ent
Disk
need to be formated in the device when using
detected by
the device, please check the disk
Figure 7.
5.3 3G/4G Setup
The device will detect the 3G/4G ModuleType automatically. Please insert the right
SIM card which corresponding with the
SIM card carrier or search on internet to make sure you put the correct parameters
(DialNumber, APN, UserName, Password). If you use VPN, please consult your
telecom carrier to get the correct parameters
5.4 WIFI Setting
The device can save maximum 6 iFi ESSID (Access Points). It will search, match,
connect, and switch automatically. Click the corresponding blank to start iFi setup. Then
click “Search” you will see the available iFi around your
to connect and input the password and save it.
AHD Mobile DVR User Manual
~ 4 ~
DeviceID which was registered on the server for your device. The user can modify
VehicleName and PlateNumber according to their requirement. The PlateNumber is the
vehicle’s plate number, and it will be displayed in the video.
DiskManage ent
need to be formated in the device when using
it for the first time. If the disk
the device, please check the disk
lock and make sure it is well locked
Figure 7.
izard-DiskManagement
The device will detect the 3G/4G ModuleType automatically. Please insert the right
SIM card which corresponding with the
ModuleType detected. Please consult your
SIM card carrier or search on internet to make sure you put the correct parameters
(DialNumber, APN, UserName, Password). If you use VPN, please consult your
telecom carrier to get the correct parameters
.
Figure 8. 3G/4G setting
The device can save maximum 6 iFi ESSID (Access Points). It will search, match,
connect, and switch automatically. Click the corresponding blank to start iFi setup. Then
click “Search” you will see the available iFi around your
area, select the one your want
to connect and input the password and save it.
DeviceID which was registered on the server for your device. The user can modify
the
VehicleName and PlateNumber according to their requirement. The PlateNumber is the
it for the first time. If the disk
was not
lock and make sure it is well locked
The device will detect the 3G/4G ModuleType automatically. Please insert the right
ModuleType detected. Please consult your
SIM card carrier or search on internet to make sure you put the correct parameters
(DialNumber, APN, UserName, Password). If you use VPN, please consult your
The device can save maximum 6 iFi ESSID (Access Points). It will search, match,
connect, and switch automatically. Click the corresponding blank to start iFi setup. Then
area, select the one your want

5.5 Server setting
IP (or Domain) is your server’s IP (or Domain), the Port should be same with your server
setup.
5.6 NetState
Path: Menu->Network-
>NetState. You can check the state of the network connection of
your device here.
Server: Online, it means the device connected with the server
AHD Mobile DVR User Manual
~ 5 ~
Figure 9. IFI setting list
IP (or Domain) is your server’s IP (or Domain), the Port should be same with your server
Figure 10. izard-Server setting
>NetState. You can check the state of the network connection of
Server: Online, it means the device connected with the server
.
Figure 11. NetState
IP (or Domain) is your server’s IP (or Domain), the Port should be same with your server
>NetState. You can check the state of the network connection of

Chapter 3 Syste Menu
1.1
Video Playback
The
device supports one channel video playback, Select “Playback” in the System menu,
then you will get the video searching interface, please search the video according to your
requirement.
The days in yellow are with recorded video. The blu
recorded video. Please move the cursor of your mouse at the corresponding channel and
time, and then left click it to replay the video.
If you want to view the video of AV5
keys on the right side of the screen, it will show the AV5
AHD Mobile DVR User Manual
~ 6 ~
Chapter 3 Syste Menu
Figure 12. System menu
Video Playback
device supports one channel video playback, Select “Playback” in the System menu,
then you will get the video searching interface, please search the video according to your
Figure 13. Video searching
The days in yellow are with recorded video. The blu
e parts in the time line bar are with
recorded video. Please move the cursor of your mouse at the corresponding channel and
time, and then left click it to replay the video.
If you want to view the video of AV5
-
AV8 Road, please click on the right and left
keys on the right side of the screen, it will show the AV5
-
AV8 video channel
device supports one channel video playback, Select “Playback” in the System menu,
then you will get the video searching interface, please search the video according to your
e parts in the time line bar are with
recorded video. Please move the cursor of your mouse at the corresponding channel and
AV8 Road, please click on the right and left
arrow
AV8 video channel

AHD Mobile DVR User Manual
~ 7 ~
Figure 14. Video searching
1.2 Video Backup
Figure 15. Video Backup
You can backup the video with an USB drive. There are two backup modes: “Normal
backup” and “Event backup”
Figure 16. Video file list
Select the video file which you want to backup and then click “Backup”, remove your
mouse and insert your USB drive, then the backup will start.

2．Basic Setting
The basic setup includes the very basic setup items such as DateTime, Ve
Information, and Preview e
tc., See as following
2.1
Date Ti e setting
Time synchronization: The system's date and time can be synchronized with GPS/BD
2.2
Vehicle Infor ation
Device ID: It is the ID
used to connect your device with the server. It should be the same
ID which you registered your device on the server.
AHD Mobile DVR User Manual
~ 8 ~
The basic setup includes the very basic setup items such as DateTime, Ve
tc., See as following
:
Figure 17. Basic setting
Date Ti e setting
Figure 18. Date Time setting
Time synchronization: The system's date and time can be synchronized with GPS/BD
Vehicle Infor ation
Figure 19. Vehicle Information
used to connect your device with the server. It should be the same
ID which you registered your device on the server.
The basic setup includes the very basic setup items such as DateTime, Ve
hicle
Time synchronization: The system's date and time can be synchronized with GPS/BD
.
used to connect your device with the server. It should be the same

2.3
Preview setting
The interface can be set up after the boot screen distribution, open screen polling and
delay
screen display, the device supports a variety of screen type display 1/2/3/4/8/9.
OSD: On Screen Display. You can select some information to display on the preview
screen (the displayed information is for preview, not for recording)
2.4 Video Output
AHD Mobile DVR User Manual
~ 9 ~
Preview setting
Figure 20. Preview setting
The interface can be set up after the boot screen distribution, open screen polling and
screen display, the device supports a variety of screen type display 1/2/3/4/8/9.
Figure 21. Preview OSD
OSD: On Screen Display. You can select some information to display on the preview
screen (the displayed information is for preview, not for recording)
Figure 22. Video Output
The interface can be set up after the boot screen distribution, open screen polling and
screen display, the device supports a variety of screen type display 1/2/3/4/8/9.
OSD: On Screen Display. You can select some information to display on the preview

2.5 On/Off setting
On/Off “Ctrl” setting is for starting on and shutting down the device automatically
HEN THE DEVICE IS ON STANDBY AFTER ACC IGNITION OFF. You can set up
three time segments.
ACC Delay: You can set up the device to keep working for a gaven time period after
the vehicle ACC ignition off.
The On/Off “Volt” setting is for setting the voltage to shut down and start on the device,
this feature can avoid
the device drained the vehicle’s battery.
The device will detect the current voltage automatically, when the vehicle’s battery voltage
is lower than the Shut.Volt, the device will shut down automatically to avoid drained the
battery. hen the voltage is hi
AHD Mobile DVR User Manual
~ 10 ~
On/Off “Ctrl” setting is for starting on and shutting down the device automatically
HEN THE DEVICE IS ON STANDBY AFTER ACC IGNITION OFF. You can set up
ACC Delay: You can set up the device to keep working for a gaven time period after
the vehicle ACC ignition off.
Figure 23. On/Off Control setting
The On/Off “Volt” setting is for setting the voltage to shut down and start on the device,
the device drained the vehicle’s battery.
The device will detect the current voltage automatically, when the vehicle’s battery voltage
is lower than the Shut.Volt, the device will shut down automatically to avoid drained the
battery. hen the voltage is hi
gher than the PowerVolt, the device can be startted on.
Figure 24. On/Off Voltage setting
On/Off “Ctrl” setting is for starting on and shutting down the device automatically
HEN THE DEVICE IS ON STANDBY AFTER ACC IGNITION OFF. You can set up
ACC Delay: You can set up the device to keep working for a gaven time period after
The On/Off “Volt” setting is for setting the voltage to shut down and start on the device,
The device will detect the current voltage automatically, when the vehicle’s battery voltage
is lower than the Shut.Volt, the device will shut down automatically to avoid drained the
gher than the PowerVolt, the device can be startted on.

2.6 Syste setup
2.7 Syste
Infor ation
System information includes: Device Model, Serial Number, Hardware & Firmware
version etc.
3．
Network setup
Network setup: This interface is used to set up the necessary parameters to connect the
device with the server
AHD Mobile DVR User Manual
~ 11 ~
Figure 25. System Setup
Infor ation
System information includes: Device Model, Serial Number, Hardware & Firmware
Figure 26. System Information
Network setup
Network setup: This interface is used to set up the necessary parameters to connect the
System information includes: Device Model, Serial Number, Hardware & Firmware
Network setup: This interface is used to set up the necessary parameters to connect the

3.1 Server setup
IP/
Domain is the AN static ip or domain of your device’s server.
3.2 3G/4G Setup
The device will detect the 3G/4G ModuleType automatically. Please insert the right
SIM card which corresponding with the ModuleType detected. Please consult your
SIM card carrier or search on internet to make sure you put the correct parameters
(DialNumber
, APN, UserName, Password). If you use VPN, please consult your
telecom carrier to get the correct parameters.
AHD Mobile DVR User Manual
~ 12 ~
Figure 27. Network Setup
Domain is the AN static ip or domain of your device’s server.
Figure 28. Server setup
The device will detect the 3G/4G ModuleType automatically. Please insert the right
SIM card which corresponding with the ModuleType detected. Please consult your
SIM card carrier or search on internet to make sure you put the correct parameters
, APN, UserName, Password). If you use VPN, please consult your
telecom carrier to get the correct parameters.
Figure 29. 3G/4G setup
The device will detect the 3G/4G ModuleType automatically. Please insert the right
SIM card which corresponding with the ModuleType detected. Please consult your
SIM card carrier or search on internet to make sure you put the correct parameters
, APN, UserName, Password). If you use VPN, please consult your

3.3 WIFI setting
The device can save maximum 6 iFi ESSID (Access Points). It will search, match,
connect, and switch
automatically. Click the corresponding blank to start iFi setup. Then
click “Search” you will see the available iFi around your area, select the one your want
to connect and input the password and save it.
You can input the ESSID of t
available iFi ESSIDs around your area
Input the password and select the IP type and then click “OK”
AHD Mobile DVR User Manual
~ 13 ~
The device can save maximum 6 iFi ESSID (Access Points). It will search, match,
automatically. Click the corresponding blank to start iFi setup. Then
click “Search” you will see the available iFi around your area, select the one your want
to connect and input the password and save it.
Figure 30. IFI Setting List
You can input the ESSID of t
he iFi AP but you can also click “Search” to search the
available iFi ESSIDs around your area
.
Figure 31. IFI Searching result
Figure 32. IFI setting
Input the password and select the IP type and then click “OK”
The device can save maximum 6 iFi ESSID (Access Points). It will search, match,
automatically. Click the corresponding blank to start iFi setup. Then
click “Search” you will see the available iFi around your area, select the one your want
he iFi AP but you can also click “Search” to search the

3.4 Network State
You can check the state of the
means the device connected with the server succesfully.
4．
Recording Setup
Recording setup includes Mode, Main Stream, Sub Stream, Recording OSD, Image
Mirror recording setting.
4.1
Recording Mode setting
AHD Mobile DVR User Manual
~ 14 ~
You can check the state of the
network connection of your device here. Server “Online”
means the device connected with the server succesfully.
Figure 33. Network State
Recording Setup
Recording setup includes Mode, Main Stream, Sub Stream, Recording OSD, Image
Figure 34. Recording setting
Recording Mode setting
network connection of your device here. Server “Online”
Recording setup includes Mode, Main Stream, Sub Stream, Recording OSD, Image
,

Figure 35.
Please set up your cameras’ SignalType, Valid/Invalid. The DVR works with both AHD
and general cameras. If you use AHD cameras, please select the first Type, if you use
general cameras,
please select the third Type, if you use both of general and AHD
cameras, please select the second Type.
4.2 Main Strea
Main Stream will be
stored in local disk. This interface shows the current Main Stream
setting and the corresponding storage size, you
corresponding parameters
.
Figure 37.
Bit is adjustable between
1024Kbps
4.3 Sub Strea
SubStream is used for network transmission and backup in local disk
AHD Mobile DVR User Manual
~ 15 ~
Figure 35.
Recording Mode setting
Please set up your cameras’ SignalType, Valid/Invalid. The DVR works with both AHD
and general cameras. If you use AHD cameras, please select the first Type, if you use
please select the third Type, if you use both of general and AHD
cameras, please select the second Type.
stored in local disk. This interface shows the current Main Stream
setting and the corresponding storage size, you
can click any line to set up the
.
Figure 36. Main Stream List
Figure 37.
Main Stream AV setting
1024Kbps
-4096Kbps (6 classes image quality).
SubStream is used for network transmission and backup in local disk
Please set up your cameras’ SignalType, Valid/Invalid. The DVR works with both AHD
and general cameras. If you use AHD cameras, please select the first Type, if you use
please select the third Type, if you use both of general and AHD
stored in local disk. This interface shows the current Main Stream
can click any line to set up the

If you use 4G network, you can set up the resolution to be D1, so you can get better effect
when you viewing the live video remotely on PC or cell phone.
4.4
Recording storage
The device
supports dual storage
store the same recording in both HDD and SD at same time.
store the main stream in HDD and sub stream in SD card, when the HDD has error
and doesn’t work, you can st
4.5
Recording OSD (On Screen Display)
You can set up the information you want
AHD Mobile DVR User Manual
~ 16 ~
Figure 38. Sub Stream setting
Figure 39. SubStream AV setting
If you use 4G network, you can set up the resolution to be D1, so you can get better effect
when you viewing the live video remotely on PC or cell phone.
Recording storage
Figure 40. Recording storage
supports dual storage
(or you can say “Mirror storage)
, means you can
store the same recording in both HDD and SD at same time.
For example, you can
store the main stream in HDD and sub stream in SD card, when the HDD has error
and doesn’t work, you can st
ill get backup video from the SD card (sub stream).
Recording OSD (On Screen Display)
You can set up the information you want
to be recorded in the video.
If you use 4G network, you can set up the resolution to be D1, so you can get better effect
, means you can
For example, you can
store the main stream in HDD and sub stream in SD card, when the HDD has error
ill get backup video from the SD card (sub stream).

4.6 I age setting
Image setup is used to adjust to camera’s image effect, please
4.7 Mirror setting
T
his feature can turn over the camera’s image horizontally or verticaly (for both
preview and recording)
5．
Advanced setting
This interface is used for UserManagement, Driving Ha
setting, Temperature Sensor, Reverse Lines setting, displaying the text received from
the server.
AHD Mobile DVR User Manual
~ 17 ~
Figure 41. Recording OSD
Image setup is used to adjust to camera’s image effect, please
set up it carefully.
Figure 42. Image setup
his feature can turn over the camera’s image horizontally or verticaly (for both
Figure 43. Mirror setting
Advanced setting
This interface is used for UserManagement, Driving Ha
bits
monitoring, UART port
setting, Temperature Sensor, Reverse Lines setting, displaying the text received from
set up it carefully.
his feature can turn over the camera’s image horizontally or verticaly (for both
monitoring, UART port
setting, Temperature Sensor, Reverse Lines setting, displaying the text received from