E-line ELI-SIP2- NVR32 User manual

ELI-SIP2- NVR32

800.683.6835 

2.2.10 SIP2 Series
2.3 Alarm Connection
2.3.1 Alarm Port
2.3.2 Alarm input port
2.3.3 Alarm input and output port
2.3.4 Alarm relay specifications
2.4 Bidirectional talk
2.4.1 Device-end to PC-end
2.4.2 PC-end to the device-end
2.5 Mouse Operation
3Device Installation
3.1 Check Unpacked NVR
3.2 About Front Panel and Rear Panel
3.3 HDD Installation
3.3.6 ELI-SIP2-NVR32 Series
3.4 CD-ROM Installation
3.5 Connection Sample
3.5.8 ELI-SIP2-NVR32 Series
Table of Contents
1Features and Specifications
1.1 Overview
1.2 Features
1.3 Specifications
1.3.11 ELI-SIP2-NVR32 Series
2Front Panel and Rear Panel
2.1 Front Panel
2.1.8
2.2
ELI-SIP2-NVR32
Series Rear Panel
OUR UNITS DO NOT SUPPORT PAL

4Local Basic Operation
4.1 Boot up and Shutdown
4.1.1 Boot up
4.1.2 Shutdown
4.2 Startup Wizard
4.3 Navigation Bar
4.3.1 Main Menu
4.3.2 Dual-screen operation
4.3.3 Output Screen
4.3.4 Tour
4.3.5 PTZ
4.3.6 Color
4.3.7 Search
4.3.8 Alarm Status
4.3.9 Channel Info
4.3.10 Remote Device
4.3.11 Network
4.3.12 HDD Manager
4.3.13 USB Manager
4.4 Smart Add
4.5 Remote Device
4.5.1 Remote Device Connection
4.5.2 Short-Cut Menu
4.5.3 Image
4.5.4 Channel Name
4.5.5 Upgrade
4.5.6 UPNP
4.5.7 Built-in Switch Setup
4.6 Preview
4.6.1 Preview
4.6.2 Preview control interface
4.6.3 Right Click Menu
4.6.4 Preview Display Effect Setup
4.6.4.1 Video Color
4.6.4.2 Display

iv
4.6.4.3 TV adjust
4.6.5 Preview Tour Parameters
4.7 PTZ
4.7.1 PTZ Settings
4.7.2 PTZ Control
4.7.2.1 PTZ Function Setup
4.7.2.2 Call PTZ Function
4.8 Record and Snapshot
4.8.1 Encode
4.8.1.1 Encode
4.8.1.2 Overlay
4.8.1.3 Snapshot
4.8.2 Schedule
4.8.2.1 Schedule Record
4.8.2.2 Schedule Snapshot
4.8.3 Motion detect record/snapshot
4.8.3.1 Motion detect record
4.8.3.2 Motion Detect Snapshot
4.8.4 Alarm Record/Snapshot
4.8.4.1 Alarm Record
4.8.4.2 Alarm Snapshot
4.8.5 Manual Record/Snapshot
4.8.5.1 Manual Record
4.8.5.2 Manual Snapshot
4.8.6 Holiday Record/Snapshot
4.8.6.1 Holiday Record
4.8.6.2 Holiday Snapshot
4.8.7 Other Record/Snapshot
4.9 Playback and Search
4.9.1 Real-time Playback
4.9.2 Search Interface
4.9.2.1 Smart Search
4.9.2.2 Accurate playback by time
4.9.2.3 Mark Playback
4.9.3 Picture Playback
4.10 Backup
4.10.1 File Backup
4.10.2 Import/Export
4.10.3 Backup Log
4.10.4 USB Device Auto Pop-up
4.11 Alarm
4.11.1 Detect Alarm
4.11.1.1 Motion Detect
4.11.1.2 Tampering
4.11.1.3 Video Loss
4.11.2 Alarm output

v
4.11.3 Alarm Setup
4.11.4 Abnormality
4.12 Network
4.12.1.1 TCP/IP
4.12.1.2 Connection
4.12.1.3 WIFI AP
4.12.1.4 WIFI
4.12.1.5 3G
4.12.1.6 PPPoE
4.12.1.7 DDNS Setup
4.12.1.8 UPnP
4.12.1.9 IP Filter
4.12.1.10 Email
4.12.1.11 FTP
4.12.1.12 SNMP
4.12.1.13 Multicast
4.12.1.14 Alarm Centre
4.12.1.15 Auto register
4.12.1.16 P2P
4.12.1.17 Easy Space
4.12.1.18 SWITCH
4.12.2 Network Test
4.12.2.1 Network Test
4.12.2.2 Network Load
4.13 HDD Setup
4.13.1 Format
4.13.2 HDD Information
4.13.3 Advanced
4.13.4 HDD Detect
4.13.4.1 Manual Detect
4.13.4.2 Detect Report
4.13.5 RAID Manager
4.13.5.1 RAID Config
4.13.5.2 Hotspare disks
4.14 Basic Setups
4.14.1 Device Setup
4.14.2 Data and Time
4.14.3 Holiday
4.15 Device Maintenance and Manager
4.15.1 System Info
4.15.1.1 Version
4.15.1.2 BPS
4.15.1.3 Online User
4.15.1.4 Remote Device Information
4.15.1.5 Remote
4.15.1.5.1 Device Status

vi
4.15.1.5.2 Firmware
4.15.2 Log
4.15.3 Voice
4.15.3.1.1 File Manage
4.15.3.1.2 Schedule
4.15.4 Account
4.15.4.1 Add/Modify Group
4.15.4.2 Add/Modify User
4.15.5 Update
4.15.6 Default
4.15.7 RS232
4.15.8 Auto Maintain
4.15.9 Logout /Shutdown/Restart
5Web Operation
5.1 General Introduction
5.1.1 Preparation
5.1.2 Log in
5.2 LAN Mode
5.3 Real-time Monitor
5.4 PTZ
5.5 Image/Alarm-out
5.5.1 Image
5.5.2 Alarm output1
5.6 Zero-channel Encode
5.7 WAN Login
5.8 Setup
5.8.1 Camera
5.8.1.1 Remote Device
5.8.1.2 Image
5.8.1.3 Encode
5.8.1.3.1 Encode
5.8.1.3.2 Snapshot
5.8.1.3.3 Video Overlay
5.8.1.3.4 Path
5.8.1.4 Channel Name
5.8.1.5 IPC Upgrade
5.8.2 Network
5.8.2.1 TCP/IP
5.8.2.2 P2P
5.8.2.3 Connection
5.8.2.4 WIFI AP
5.8.2.5 WIFI
5.8.2.6 3G
5.8.2.6.1 CDMA/GPRS
5.8.2.6.2 Mobile
5.8.2.7 PPPoE

vii
5.8.2.8 DDNS
5.8.2.9 IP filter
5.8.2.10 Email
5.8.2.11 UPnP
5.8.2.12 SNMP
5.8.2.13 Multicast
5.8.2.14 Auto Register
5.8.2.15 Alarm Centre
5.8.2.16 HTTPS
5.8.2.16.1 Create Server Certificate
5.8.2.16.2 Download root certificate
5.8.2.16.3 View and set HTTPS port
5.8.2.16.4 Login
5.8.3 Event
5.8.3.1 Video detect
5.8.3.1.1 Motion Detect
5.8.3.1.2 Video Loss
5.8.3.1.3 Tampering
5.8.3.2 Alarm
5.8.3.2.1 Local Alarm
5.8.3.2.2 Net Alarm
5.8.3.2.3 IPC external alarm
5.8.3.2.4 IPC Offline Alarm
5.8.3.3 Abnormality
5.8.4 Storage
5.8.4.1 Schedule
5.8.4.2 HDD Manager
5.8.4.2.1 Local Storage
5.8.4.2.2 HDD
5.8.4.2.3 FTP
5.8.4.3 Record Control
5.8.4.4 RAID Manager
5.8.4.4.1 RAID Config
5.8.4.4.2 Hotspare disks
5.8.4.5 Storage
5.8.4.5.1 Main Stream
5.8.4.5.2 Sub Stream
5.8.4.5.3 Snapshot
5.8.5 Setting
5.8.5.1 General
5.8.5.1.1 General
5.8.5.1.2 Date and time
5.8.5.1.3 Holiday Setup
5.8.5.2 Account
5.8.5.2.1 User name
5.8.5.2.2 Group

viii
5.8.5.3 Display
5.8.5.3.1 Display
5.8.5.3.2 Tour
5.8.5.4 Alarm
5.8.5.5 Default
5.8.5.6 Import/Export
5.8.5.7 Auto maintain
5.8.5.8 Upgrade
5.8.5.9 RS232
5.8.5.10 PTZ
5.9 Information
5.9.1 Version
5.9.2 Log
5.9.3 Online User
5.10 Playback
5.10.1 Search Record
5.10.2 File List
5.10.3 Playback
5.10.4 Download
5.10.5 Load more
5.10.5.1 Download By File
5.10.5.2 Download by Time
5.10.5.3 Watermark
5.11 Alarm
5.12 Log out
5.13 Un-install Web Control
6Glossary
7FAQ
8Appendix A HDD Capacity Calculation
9Appendix B Compatible Network Camera List

Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for all the fires or electric shock caused by improper
handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Keep upwards. Handle with care.
Do not apply power to the NVR before completing installation.
Do not place objects on the NVR.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The NVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive
substances and etc.
This series product shall be transported, storage and used in the specified environments.
Environment which needs to comply with the following conditions:
The function of the ITE being investigated to IEC 60950-1 is considered not likely to require
connection to an Ethernet network with outside plant routing, including campus environment.
The installation instructions clearly state that the ITE is to be connected only to PoE networks
without routing to the outside plant.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
7. Lithium battery
Improper battery use may result in fire, explosion, or personal injury!
When replace the battery, please make sure you are using the same model!
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Before your operation please read the following instructions carefully.
Installation environment
Welcome
Thank you for purchasing our network video recorder!
This user’s manual is designed to be a reference tool for your system.
Please open the accessory bag to check the items one by one in accordance with the list below.
Contact your local retailer ASAP if something is missing or damaged in the bag.

Keep away from extreme hot places and sources；
Avoid direct sunlight；
Keep away from extreme humid places；
Avoid violent vibration；
Do not put other devices on the top of the NVR；
Be installed in well ventilated place; do not block the vent.
Accessories
Check the following accessories after opening the box：
Please refer to the packing list in the box *
1.3.11
Specifications
System
Main Processor Industrial embedded micro processor
Operation System Embedded LINUX system
System
Resources
Max 8-channel×1080P connection,
User Interface WEB, local GUI
Audio
Parameters
Audio Input 1-ch MIC bidirectional talk audio input
Audio Output 1-ch MIC bidirectional talk audio output
Audio
Compression
Standard
G.711a, G.711u, PCM, G726
Video
Parameters
Video Input 8/16/32-ch network compression video input
Video Output 1-channel VGA
2-channel HDMI.
Video
Compression
Standard
H.264

Window Split
Mode
The 1st screen: 1/4/8/9/16-screen.
The 2nd screen: 1/4-screen.
Alarm
Parameters
Alarm Input 16-channel
Alarm Output 6-channel relay output
Decode
Parameters
Decode Type MPEG4，H.264，H.265
Decode Capability 16-channel×D1;8-channel×720P, 4-channel 1080P;1-channel
4K
Functions
Record Mode Manual recording, motion detection recording, schedule
recording and alarm recording.
Priority: Manual recording>card number recording-> alarm
recording>motion detection recording>schedule recording.
Multi-Channel
Playback
Max support 64M（H265&H264 1:1） playback at the same
time.
Motion Detect Each screen supports 396/330((PAL 22×1 8, NTSC 22×1 5)
detection zones. Various sensitivity levels.
Privacy Mask Each channel supports 4 privacy mask zones.
Record Mode Overwrite
Backup Mode Flash disk, eSATA, DVD burner.
Network
Function
Network Protocol IPv4/IPv6/HTTP/UPnP/NTP/SADP/SNMP/PPPoE/DNS/FTP/
ONVIF/PSIA
SATA Port 8 SATA Ports
eSATA Port 1 eSATA port
RS232 Port 1 RS232 port. To debug and transmit COM data.
RS485 Port 1 RS485 port. To control peripheral PTZ and etc. Support
various protocols.
USB Port 2 USB 2.0 ports at the front panel and 2 USB3.0 ports at the
rear panel.
HDMI Port 2 HDMI ports
Network Port 2 RJ45 10/100/1000Mbps self-adaptive Ethernetet ports+2
1000Mbps self-adaptive fiber ports
Power On-off
Button One at the rear panel.
Indicator Light
4 indicator lights.
1 system running status indicator light
1 HDD indicator light
1 network status indicator light
1 power status indicator light
General
Parameters
Power AC100~240V
Power
Consumption
General series: ＜18.8W（No HDD）,
PoE series: <27.9W （No HDD）,
Working
Temperature 0℃～50℃
Working Humidity 10%～90%（No condensation）
Dimensions (W×
H×D) 440×95×445mm
Weight General series:6.6 kg（No HDD）,
PoE series: 6.75kg （No HDD）,
Installation Mode Rack/desktop

Playback
Port and
Indicator
RS232
Port
One RS232 port to debug transparent COM data.
RS485
port
One RS485 port to control PTZ. Support various protocols.
USB2.0
Port
3 peripheral USB2.0 ports. Two at the front panel and one at the rear panel.
Network
Connecti
on
One RJ45 10/100/1000Mbps
self-adaptive Ethernet port.
One RJ45 10/100/1000Mbps
self-adaptive Ethernet port.
Power
Port
One power port. Input 100-240V，50~60Hz.
Power
Button
One button. At the rear panel.
Power
On-off
Button
One button. At the front-panel.
IR
Receiver
Window
Support IR remote control
Clock Built-in clock.
General Indicator
Light
One power status indicator light.
One network status indicator light.
One HDD status indicator light.
Power
Consump
tion
＜30W(Exclude HDD)
Working
Temperat
ure
-10℃～+55℃
Working
Humidity
10℅－90℅
Air
pressure
86kpa－106kpa
Dimensio
n
440mm × 460mm × 89mm
Weight 5.5kg～6.5kg（Exclude HDD）
Installatio
n
Desk installation
System System
Resource
s
8/16/32/64-channel series product support 8/16/32/64-channel HD
connection respectively. The main stream bandwidth supports
48/96/192/192Mbps.
Operation
System
Embedded Linux real-time operation system
Operation
Interface
WEB/Local GUI

Decode Video
Compres
sion
H.264/MJPEG
Decode
Capacity
Max supports 32-channel D1, or 16-channel 720P, or 8-channel 1080P
decode.
Video Video
Input
8/16/32/64-ch network compression video input
Video
Output
1-channel VGA analog video output.
HDMI 1-ch HDMI output. Version number is 1.4
Window
Split
1/4/8/9/16/25/36-window
Audio Audio
Input
1-ch bidirectional talk input
Audio
Output
1-ch bidirectional talk output
Audio
Compres
sion
G.711a
Alarm Alarm
Input
8-ch alarm output
Alarm
Output
3-ch alarm output
Relay output. Relay （DC 30V/1A，AC 125V/0.5A（Activation output））
Including one controllable DC +12V output.
Function Storage 2 built-in SATA ports.
Multiple-c
hannel
Playback
Max 16-channel 720P/8-channel 1080P playback at the same time.
Port and
Indicator
RS232
Port
One RS232 port to debug transparent COM data.
RS485
port
One RS485 port to control PTZ. Support various protocols.
USB2.0
Port
2 peripheral USB2.0 ports. One at the front panel and one at the rear panel.
Network
Connecti
on
1 RJ45 10/100Mbps self-adaptive Ethernet port.
Power
Port
One power port, power adapter.
Input DC 12V.
One power port. Input 100-240V，
47~63Hz.
Power
Button
One button. At the rear panel.
Power
On-off
Button
One button. At the front-panel.
IR
Receiver
Window
Support IR remote control
Clock Built-in clock.

General Indicator
Light
One power status indicator light.
One network status indicator light.
One HDD status indicator light.
Power
Consump
tion
＜30W(Exclude HDD)
Working
Temperat
ure
-10℃～+55℃
Working
Humidity
10℅－90℅
Air
pressure
86kpa－106kpa
Dimensio
n
1U case. 295mm×275mm×47mm
Weight 1.5kg～2.5kg (Exclude HDD）
Installatio
n
Desk installation
2.1.8
The Front panel is shown as follows. See Figure 2-9.
Figure 2-9
Please refer to the following sheet for front panel button information.
Name Icon Function
Power button Power button, press this button for three seconds to boot up or
shut down NVR.
Number button 0-9 Input Arabic number
Switch channel
number Input
more than 10 -/-- If you want to input a number more than 10, please click this button and then input.
Shift 
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
Enable or disable tour.
Up/
Down 、Activate current control, modify setup, and then move up and
down.

41
Increase/decrease numeral.
Assistant function such as PTZ menu.
Left/
Right  
Shift current activated control, and then move left and right.
When playback, click these buttons to control playback bar.
ESC ESC
Go to previous menu, or cancel current operation.
When playback, click it to restore real-time monitor mode.
Enter ENTER
Confirm current operation
Go to default button
Go to menu
Record REC Manually stop/start recording, working with direction keys
or numeral keys to select the recording channel.
Slow play Multiple slow play speeds or normal playback.
Assistant Fn
One-window monitor mode, click this button to display assistant
function: PTZ control and image color.
Backspace function: in numeral control or text control, press it for
1.5seconds to delete the previous character before the cursor.
In motion detection setup, working with Fn and direction keys to
realize setup.
In text mode, click it to switch between numeral, English
character(small/capitalized) and etc.
In HDD management interface, you can click it to switch HDD
record information and other information (Menu prompt)
Realize other special functions.
Fast play  Various fast speeds and normal playback.
Play previous | In playback mode, playback the previous video
Reverse/Pause 
In normal playback or pause mode, click this button to reverse
playback
In reverse playback, click this button to pause playback.
Play Next |In playback mode, playback the next video
In menu setup, go to down ward of the dropdown list.
Play/Pause In normal playback click this button to pause playback
In pause mode, click this button to resume playback.

Window switch Mult Click it to switch one-window/multiple-window.
Shuttle(outer
ring)
In real-time monitor mode it works as left/right direction key.
Playback mode, counter clockwise to forward and clock wise to
backward.
Jog(inner dial)
Up/down direction key.
Playback mode, turn the inner dial to realized frame by frame
playback. (Only applies to some special versions.)
USB port To connect USB storage device, USB mouse.
Remote control
indicator light ACT Remote control indicator light
Status indicator
light Status If there is Fn indicator light , current status indicator light is null.
Power indicator
light PWR Power indicator light
Channel indictor
light 1-32
For 4/8/16-channel series product.
The corresponding channel light becomes on when system is
recording.
For 32/64-channel series product:
When the light flashes slowly, it means the corresponding
channel of 1-16 channel is recording now (Such as channel 1).
When the light flashes fast, it means the corresponding channel
of 17-32 channel is recording now (Such as channel 17)
When the light becomes on, It means the corresponding 2
channels are recoding now (Such as channel 1 and channel 17.).
the 33-64-channel.
IR Receiver IR It is to receive the signal from the remote control.
2.2.10
These series rear panel is shown as below. See Figure 2-34.
Figure 2-34
Please refer to the following sheet for detailed information.
Name Function
Power switch Power on-off button
Power input port Input AC 100~240V.

Name
Function
Network port
10M/100M/1000Mbps self-adaptive Ethernet port.
Connect to the network cable.
eSATA
eSATA port
External SATA port. It can connect to the device of
the SATA port. Please jump the HDD when there is
peripheral connected HDD.
USB3.0 port
USB3.0 port. Connect to mouse, USB storage
device, USB burner and etc.
HDMI
High Definition
Media Interface
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the display
device. HDMI version is 1.4b.
MIC IN
Audio input port
Bidirectional talk input port. It is to receive the analog
audio signal output from the devices such as
microphone, pickup.
MIC OUT
Audio output port
Audio output port. It is to output the analog audio
signal to the devices such as the sound box.
Bidirectional talk output.
Audio output on 1-window video monitor.
Audio output on 1-window video playback.
1～16
Alarm input port
1～16
There are four groups. The first group is from
port 1 to port 4, the second group is from port 5
to port 8, the third group is from 9 to 12, and the
fourth group is from 13 to 16. They are to receive
the signal from the external alarm source. There
are two types; NO (normal open)/NC (normal
close).
When your alarm input device is using external
power, please make sure the device and the
NVR have the same ground.
Ground
Alarm input ground end.
NO1～NO5
Alarm output port
1～5
5 groups of alarm output ports. (Group 1：port
NO1～C1,Group 2:port NO2～C2,Group 3:port
NO3～C3, Group 4：port NO4～C4, Group 5:
port NO5, C5, NC5).Output alarm signal to the
alarm device. Please make sure there is power
to the external alarm device.
NO: Normal open alarm output port.
C: Alarm output public end.
NC: Normal close alarm output port.
C1～C5
NC5
A
RS-485
communication
port
RS485_A port. It is the cable A. You can connect to
the control devices such as speed dome PTZ.
B
RS485_B.It is the cable B. You can connect to the
control devices such as speed dome PTZ.

Name
Function
CTRL 12V
/
Controller 12V power output. It is to control the on-off
alarm relay output. It can be used to control the
device alarm output. At the same time, it can also be
used as the power input source of some devices such
as the alarm detector.
+12V
/
+12V power output port. It can provide the power to
some peripheral devices such as the camera or the
alarm device. Please note the supplying power shall
be below 1A.
RS-232
RS232 debug
COM.
It is for general COM debug to configure IP address
or transfer transparent COM data.
VGA
VGA video output
port
VGA video output port. Output analog video signal. It
can connect to the monitor to view analog video.

Figure 2-48
Icon Function
1～16 ALARM1～ALARM16. The alarm becomes activated in the
low level.
NO1 C1，NO2 C2，NO3 C3，NO4
C4
Four NO activation output groups. (On-off button).
NO5 C5 NC5 One NO/NC activation output group. (On-off button).
CTRL 12V Control power output. Disable power output when alarm is
canceled. Current is 500mA.
＋12V Rated current output. Current is 500mA.
GND
A/B 485 communication port. They are used to control devices
such as PTZ. Please parallel connect 120TΩ between A/B
cables if there are too many PTZ decoders.
Note
Different models support different alarm input ports. Please refer to the specifications sheet for
detailed information.
Slight difference may be found on the alarm port layout.
2.3.2 Alarm input port
Connect the positive end (+) of the alarm input device to the alarm input port (ALARM IN 1～16) of the
NVR. Connect the negative end (-) of the alarm input device to the ground end ( ) of the NVR.
2.3 Alarm Connection
2.3.1 Alarm Port
The alarm port is shown as below. See Figure 2-48. The following figure is based on the 78 series.

83
Figure 2-49
Note
There are two alarm input types: NO/NC.
When connect the ground port of the alarm device to the NVR, you can use any of the GND ports
().
Connect the NC port of the alarm device to the alarm input port (ALARM) of the NVR.
When there is peripheral power supplying for the alarm device, please make sure it is earthed with
the NVR.
2.3.3 Alarm input and output port
There is peripheral power supplying for the external alarm device.
In case overload may result in NVR damage, please refer to the following relay specifications for
detailed information.
A/B cable of the RS485 is for the A/B cable connection of the speed PTZ.
2.3.4 Alarm relay specifications
Model:
JRC-27F
Material of the
touch
Silver
Rating
（Resistance
Load）
Rated switch capacity
30VDC 2A, 125VAC 1A
Maximum switch power
125VA 160W
Maximum switch voltage
250VAC, 220VDC
Maximum switch currency
1A
Insulation
Between touches with same
polarity
1000VAC 1minute