E-matic eGlide Reader 2 User manual

Notes, Cautions, and Warnings
Note: A NOTE indicates important information that helps you make better use of
your device.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if
instructions are not followed
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
Information in this document is subject to change without notice.
© 2011 Ematic Inc. All rights reserved.
Trademarks used in this text:
Adobe Acrobat is a trademark of Adobe Systems Incorporated which may be registered
in certain jurisdictions; Microsoft, Windows, Microsoft Office Word, Microsoft Office
Excel, and Microsoft Office PowerPoint, are either trademarks or registered trademarks
of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the
entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that may
cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
For body worn operation, this phone has been tested and meets FCC RF exposure
guidelines when used with an accessory that contains no metal and that positions the
handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
IMPORTANT: Must use included Transfer Box to transfer documents, music and videos
onto the device.

Contents
1Important Safety Precautions ............................................4
2Cleaning Your Device.........................................................4
3Package Contents...............................................................4
4eGlide 2 Features................................................................5
5Setting Up Your eGlide 2 Tablet ........................................7
Charge the device:...................................................7
Battery Management................................................7
Turn the device ON:.................................................7
Settings.....................................................................8
Setup the Wi-Fi Enabled Network:..........................9
Transfer Box...........................................................10
ADSL Settings ........................................................10
3G Settings .............................................................11
MicroSD Card .........................................................12
6Understanding Your eGlide 2 ..........................................13
Touch Screen .........................................................13
Screen Orientation.................................................13
Screen Lock............................................................14
Applications, Widgets, and Shortcuts..................14
Desktop Screen......................................................15
Table of Contents | 2

3 | Table of Contents
Desktop Function Menu ........................................16
7Applications ......................................................................18
Pre-loaded Applications ........................................18
WmtWeather ...........................................................19
Clock .......................................................................19
App Market .............................................................20
Browser...................................................................22
Calendar..................................................................23
Camera....................................................................23
Calculator ...............................................................24
Email .......................................................................24
File Browser ...........................................................26
My Music.................................................................27
My Video .................................................................29
My Photo.................................................................29
30
Contacts..................................................................
31
Picture Capture......................................................
31
Task Manager.........................................................
32
YouTube.................................................................
33
8Frequently Asked Questions..........................................
34
Limitations of Liability Statement...................................

Safety, Cleaning, and Package Contents | 4
1 Important Safety Precautions
Always follow these basic safety precautions when using your device. This reduces the
risk of fire, electric shock, and injury.
• Do not expose this product to rain or moisture.
• Keep the device out of direct sunlight and heat sources.
• Protect the power cord. Route power cords so they are not likely to be walked on
or pinched by items placed on or against them. Pay particular attention to the
point where the cord attaches to the device.
• Only use the AC adapter included with the device. Using any other power
adapter voids your warranty.
• Do not remove the cover. There are no user-serviceable parts inside.
2 Cleaning Your Device
CAUTION: Treat the screen gently to avoid damage.
To clean fingerprints or dust from the screen, it is recommended that a soft, non-
abrasive cloth, such as a camera lens cloth, be used.
3 Package Contents
Check the contents of your package to verify that you have the following:
eGlide 2 Tablet device
Quick Start Guide
Warranty Service Information
Power Adapter
Transfer Box
Earphone

5 | Features
4 eGlide 2 Features
Buttons/Connectors/Parts Functionality
Power • If the device is OFF, press and hold the power
button for 3 seconds to power ON the device.
• If the device is ON, press and hold the power button
for 3 seconds and then tap OK on the screen to
power OFF the device.
• If the device is in SLEEP MODE, press and release
the power button quickly to turn sleep mode ON and
OFF.
• If the device becomes unresponsive, press and
hold the power button for 8 seconds to FORCE OFF
the device.
NOTE: It is not recommended to use the FORCE
OFF feature. Instead, follow the steps to perform a
RESET.

Features | 6
Buttons/Connectors/Parts Functionality
Menu • Press to open or close the menu displaying
available options for the current application or actions
for the current screen.
• Press and hold to display the on-screen keyboard
for text input.
Volume • While playing media:
- Press and release to increase or decrease the
volume one level at a time.
- Press and hold to increase or decrease the volume
by larger incremental levels.
MicroSD Card Slot • Insert a microSD card into the microSD Card Slot.
NOTE: The device supports a maximum 32GB
microSD card.
24-Pin Connector • Insert the transfer box into the 24-Pin connector to
use a USB storage device (U-disk) for
accessing/storing photos, music, or video files.
Headphone • Connects to headphones and automatically
switches audio output from the audio speakers to the
headset.
Power Interface • Connect the power adapter to an electrical outlet
and then connect to the device to charge the battery.
Reset • Press the reset button to RESET the device.
NOTE: The reset button does not restart the
device. Press the power button after the RESET
button to reboot and to power ON the device.
CAUTION: RESET may erase all data on the
Back • Press to return to the previous screen, to close a
dialog box, a menu, or a message, and to dismiss
the on-screen keyboard.
Front-Facing Camera Lens • Use for taking front view pictures (i.e., self
portraits).
Audio Speaker Audio output for video and music playback.

7 | Setup
5 Setting Up Your eGlide 2 Tablet
Charge the device:
1 Plug the power adapter into an electrical wall outlet.
2 Connect the power adapter to the device’s power interface port to fully charge
the battery before use (approximately 4 hours).
a. While charging, the battery
green and have a picture of
b. When fully charged, the
battery indicator light
is green.
NOTE: The device cannot be charged via the 24-Pin Connector Port using the
transfer box and a USB cable.
NOTE: The device can be used while the battery is charging, although the charging
time is longer when operating and charging at the same time.
Battery Management
The battery is not fully charged out of the box, so it is recommended you charge the
battery for at least 4 hours before you start to use the device.
The rechargeable battery is designed and manufactured to be used and recharged
frequently. As with all batteries, the capacity of the battery reduces each time it is
charged/depleted. However, you can still try to prolong the battery’s lifetime by following
the suggestions below:
• Use your Tablet at least once a week.
• Charge the battery regularly and fully.
• Never leave the battery fully discharged for a long period of time.
• Always keep the device and the battery away from heat.
Turn the device ON:
1 Press and hold the power button for 3 seconds to power ON the device.
indicator will fill/drain
a lightning bolt.

Setup | 8
Settings
Tap the Settings icon to access the menu(s) for the following preferences:
Menu Category Setting Name Function
Wi-Fi Enable Wi-Fi.
Wi-Fi Settings Setup and manage wireless access points.
Airplane Mode Disable all wireless connections.
Wireless & Networks
3G Network
Settings
Setup 3G network.
Ethernet Configure Ethernet network.
ADSL Settings Perform ADSL settings. Input username
and password to connect.
Mass Storage Configure USB to mass storage. USB
ADB Configure USB to ADB.
Silent Mode Silence all sounds except media & alarms.
Volume To adjust the media, alarm, and notification
volume.
Finger slide the volume track control
and then tap OK.
Notification
Ringtone
Select desired ringtone sound.
Audible Selection Select to enable a sound when making a
screen selection.
Sound
Screen Lock
Sounds
Play sounds when locking and unlocking
the screen.
Brightness To adjust the screen brightness as desired.
Finger slide the brightness track control
and then tap OK.
Auto-Rotate Screen When enabled, the orientation of the
screen automatically changes between
Portrait and Landscape when the device is
rotated.
Screen Timeout Adjust the delay before the screen
automatically turns off.
Display
Suspend Timeout Adjust the delay before the device
automatically suspends after the screen
turns off.

9 | Setup
Menu Category Setting Name Function
Setup Screen Lock Lock screen with a pattern, PIN, or
password.
Visible Passwords Show password as you type.
Select
Administrators
Add or remove device administrators.
Use Secure
Credential
Allow applications to access secure
certificates and other credentials.
Install from micro-
SD Card
Install encrypted certificates from microSD
Set Password Set or change the credential storage
password.
Security
Clear Storage Clear credential storage of all contents and
rest its password.
Unknown Sources Allow application of non-market
applications.
Manage
Applications
Manage and remove installed applications
Running Services View and control currently running
services.
Applications
Development Set options for application development.
Setup the Wi-Fi Network:
NOTE: Since many features require a Wi-Fi Enabled connection, it is recommended
that the Wi-Fi Enabled network be set up with the first use of the device.
1 Tap the icon on the desktop.
2 Select Settings.
3 Select Wireless & network.
4 Select Wi-Fi to enable the Wi-Fi connection.
5 Allow the device to automatically scan and to list all the local Wi-Fi Networks
found.
NOTE: A indicates secure networks that require a login name/password
to connect.
6 Tap the desired network to which you want to connect.
7 Enter the Network Password, if applicable.
8 Tap Connect.
NOTE: The wireless connection icon will appear in the status bar on the
Desktop screen when the device is successfully connected to the Internet.
Card.

Setup | 10
Transfer Box
NOTE: You must use the transfer box to connect to a USB storage device (U-disk)
for accessing/storing your photos, music, video, or eBook files, to connect to an Ethernet
network, or to connect to a 3G wireless network card.
To connect to a USB device:
1 Insert a USB device (U-disk) into the transfer box.
2 Insert the transfer box into the 24-Pin interface on the tablet.
CAUTION: Don’t insert and remove the U-disk repeatedly in a short time, as this
may cause damage to the U-disk.
To connect to an Ethernet cable:
1 Insert the transfer box into the 24-Pin interface on the tablet.
2 Insert the Ethernet cable into the Ethernet interface on the transfer box.
3 Observe the device has automatically accessed the network IP address as
indicated by the appearance of ETH in the status bar on the Desktop screen.
4 Tap the Ethernet icon to manually connect to an IP address.
ADSL Settings
1 Tap the ADSL Settings application icon .
2 Input a username and password.
3 Select Connect to access the broadband network.

11 | Setup
3G Settings
NOTE: A 3G wireless network card (purchased separately) is required to connect
to a 3G network.
The following is a list of 3G network specifications compatible with your device:
Channel Access Method Network Device
TD-CDMA TD368
HUA WEI E220
HUA WEI E230
HUA WEI E160X
HUA WEI E169G
WCDMA
HUA WEI E1750
Bora 9380 CDMA2000
AWIT-U8
To connect to a 3G wireless network:
1 Insert the USB connector of the 3G wireless network card into the transfer box.
2 Insert the transfer box into the 24-Pin interface on the tablet.
3 Observe the bright lights on the 3G wireless network card, which indicate the
card is receiving power and is ready to begin connection to the 3G network.
4 Tap the 3G Settings application icon .
5 Tap Add 3G network.
6 Enter a Name for the 3G network in the name field of the pop-up dialog box.
7 Observe that the network device field is selected for you by the tablet.
8 Enter the Device number and APN, which are available from your 3G wireless
network provider.
9 Optional: Enter a username and password.
10 Follow the on-screen directions to complete the setup of the 3G wireless network
card.
NOTE: When the 3G network card is successfully connected, the 3G icon will
appear in the status bar on the Desktop screen.

Setup | 12
MicroSD Card
NOTE: The device supports a maximum 32GB microSD card.
To insert a microSD card:
Insert a card into the microSD slot until it clicks into place.
To remove a microSD card:
CAUTION: Don’t insert and remove the microSD card repeatedly in a short time,
as this may cause damage to the card.
1 Close all applications and documents which have been opened from the card.
2 Tap the INDEX icon .
3 Select Settings.
4 Select SD card & device storage.
5 Select Unmount SD card.
6 Press the card lightly to partially eject it.
7 Remove the microSD card from the slot completely.

13 | Understanding Your eGlide 2
6 Understanding Your eGlide 2
Touch Screen
Your device has a multi-touch sensitive screen that allows quick, easy and convenient
navigation for all applications.
Throughout this User Guide, you are instructed to use the following navigation methods:
Action Response
Tap
Quickly tap and release one time
on the screen.
Selects the items on the screen including options,
entries, images, and icons.
Starts applications.
Presses the buttons on the screen.
Inputs text using the on-screen keyboard or number
keypad.
Finger Slide
Touch and slide your finger
across the screen and then
release.
Moves items such as images and icons on the
screen.
Moves the adjustment icon along a track to change a
setting (i.e., volume, brightness, screen unlock, etc.)
Moves the desktop screen horizontally to expose
additional display space.
Touch and Hold
Touch and hold in place
approximately 2 seconds and
then release.
Displays an options window.
Moves applications from the All Application screen
to the desktop or a folder.
Downloads Android applications direct from a
website.
Deletes email accounts and contacts.
Screen Orientation
With the Auto-Rotate function enabled, the orientation of the screen automatically
changes between Portrait and Landscape when the device is rotated.

Understanding Your eGlide 2 | 14
Screen Lock
The screen lock feature can be set to lock automatically through the settings menu or
manually locked by quickly pressing and releasing the power button.
Icon Description
Tap the PLAY button in the corner of the MY PHOTO
icon to display a slide show of your photographs
while the screen is locked.
Finger slide the ARROW icon along the track to the
UNLOCK position to unlock the screen and
restore navigation properties.
Applications, Widgets, and Shortcuts
Application - Software which allows you to perform a specific task. Your device is
preloaded with a variety of applications, and additional ones can be downloaded from
the App Market or Appoke Market, as well as on the internet.
Widget - A small application which resides on the Desktop screen and provides quick
and easy access to information.
Shortcut - A link you can put on your Desktop Screen to provide quicker access to an
application or a folder containing contacts or bookmarks.

15 | Understanding Your eGlide 2
Desktop Screen
The Desktop screen displays widgets, folders, and shortcuts that provide easy access to
your favorite or frequently-used applications.
NOTE: Touch the HOME button to return to the desktop screen at any time.
Icon Description
① Return to Desktop from other apps
② Battery charge status
③ Current Time
④ Picture capture icon
⑤ Volume reduction icon
⑥ Volume increase icon
⑦ FunctionMenu icon
⑧ Back icon
Tap to view the All Application screen
• Tap on any application icon to launch it.
• Finger slide icons to reposition them on the screen.

Understanding Your eGlide 2 | 16
• Finger slide icons onto the recycle bin icon to remove them from the Desktop
screen.
Desktop Function Menu
On the Desktop screen, tap the INDEX icon to display the Function Menu:
Function Description
Add
The viewable portion of the Desktop screen allows
only 16 icons.
To add more items to a full desktop screen:
1 Finger slide the screen horizontally to expose
available space.
2 Tap the ADD button.
Shortcuts Add quick-launch shortcuts on the Desktop to
applications, bookmarks, or settings.
NOTE: If you select items that are shortcuts
already on the Desktop screen, they will be
duplicated, resulting in multiple icons for the same
item.

17 | Understanding Your eGlide 2
Function Description
Widgets Analog clock: Add a round analog clock.
Calendar: Add a calendar widget to display current
day and events.
Music player: Add a music widget to quickly begin
playing music without launching the music
applicaton.
Folders New folder: Add a folder into which you can add
applications as desired.
To move applications on the Desktop into the folder:
1 Finger slide the icons directly on top of the
folder icon.
To add application from the All Application screen:
1 Tap the folder to open it.
2 Tap the applications icon to open the All
Application screen.
3 Touch and hold on a desired application icon
to copy it into the folder.
Wallpaper
Select wallpaper from Picture and Wallpapers.
Search
Perform a quick Google search:
1 Tap in the entry field.
2 Enter the desired search field.
3 Tap the search icon.
Notifications
List any pending notifications (i.e., new email,
calendar events, etc.)
Settings
See “Settings” in this User Manual.

Applications | 18
7 Applications
Pre-loaded Applications
Application Description
WmtWeather Displays the weather.
Clock Use as alarm clock with scheduled alarms.
App Market Download applications quickly and easily.
Browser Access the Internet and “surf the web” whenever desired.
Calendar Calendar with ability to set events.
Camera Take photos and save to internal memory or memory device.
Calculator Perform mathematical calculations.
Email Send/Receive email using your existing email addresses.
File Browser File manager for viewing and managing files and apps.
My Music Play and manage audio files.
My Video Play and manage video files.
My Photo View and manage photo files.
eBuddy Chat online anywhere anytime.
Contacts Create and store a list of personal contacts.
Picture Capture Capture images of the screen.
Task Manager Application manager for managing processes.
YouTube Quick-launch to YouTube.com videos.
Appoke Market Download applications quickly and easily.
Daily Paper Browse the latest news all over the world.
Settings Multiple settings for personalizing and enhancing your device.
Wi-Fi Settings Set Wi-Fi network.
BOX.net Store large files online.

19 | Applications
WmtWeather
Tap the WmtWeather icon to launch the application.
Display the weather on the Desktop by making the application a widget:
1 Tap the INDEX icon .
2 Tap ADD .
3 Select Widgets.
4 Select WmtWeather.
5 Tap the HOME icon to return to the Desktop screen.
Option Description
General Setting Set the desired unit of measure for the temperature
(°C or °F).
Set the frequency for updates.
Adjust the Auto Wallpaper settings.
My Cities Set the desired location for updates.
1. Add the desired city.
2. Set the desired city to be My City.
Clock
Tap the Clock icon to launch the application to see the time and date and to set the
alarm.
NOTE: The clock icon displayed at the top of a screen indicates one or more
alarms have been set and are active.
To add an alarm:
1 Tap the Clock icon .
2 Tap the INDEX icon .
3 Select Add alarm.
4 Set the desired alarm.
NOTE: If you don’t select a repeat frequency, the alarm is automatically
deleted after it is activated.
5 Tap Turn alarm ON.
6 Tap Done.
To silence an alarm alert:

Applications | 20
When a scheduled alarm is activated, a pop-up window with the alarm title appears.
1 Tap snooze to be reminded again in 10 minutes.
2 Tap dismiss to cancel the alert.
To activate/deactivate an alarm:
On alarms set to repeat, you may want to temporarily suspend an alarm rather than
delete it.
1 Tap the Clock icon .
2 In the Alarm screen, tap the check icon by the desired alarm(s) to activate
the alarm.
3 Tap the check icon to deactivate and suspend an alarm.
4 Tap the HOME icon to return to the Desktop screen.
To edit an alarm:
1 Tap the Clock icon .
2 Tap on the alarm you want to edit.
3 Make the desired changes to the selected alarm.
4 Tap the HOME icon to return to the Desktop screen.
To delete an alarm:
1 Tap the Clock icon .
2 Tap on the alarm you want to delete
3 Tap the INDEX icon .
4 Select Delete alarm.
5 Tap the HOME icon to return to the Desktop screen.
App Market
The App Market has many applications you can quickly and easily download to your
device.
To download applications:
1 Tap the App Market icon .
2 Search for the desired application in the default Featured group, by Categories,
Top (latest, hottest, random), or by name.
3 Tap on the desired application.