Earthwase 60236 T2 User manual

60236 T2
CALL 1-800-377-5888 (USA), 1-800-561-0004 (CNA)
8458 5168002-031
2011 10/17
-
/
80g

30

and wait until the blade comes to amotor
complete stop before cleaning the lawn mower,removing
the grass catcher or unclogging the discharge openings.
lawn mower.
and wait until the blade comes to amotor
complete stop before cleaning the lawn mower,removing
the grass catcher or unclogging the discharge openings.
Never allow adults to operate the product without
proper instruction.
or other safety protective devices properly in place.
side discharge deflector,rear discharge door,
while operating the mower.
can slipping or falling .hazard
while operating the mower.
opening.

thrown
and wait until the blade comes to
complete stop before removing the grass catcher or
openings.
and/
to determine if the
charger is in good working order.
be
loan someone this mower,
of the plug on the charger.
Stop the lawn mower and release the switch control bail wire.
grass catcher or unclogging the discharge openings.The cutting blade
, remove the switch key and check immediately for the
cause. Vibration is generally a warning of trouble.
, which could result

SWITCH KEY

,
,do not return
allow
the blade to cut and recut the grass for finer clippings.
to store. Please call 1-800-377-5888 (USA),
1-800-561-0004 (CNA) for assistance.

LOWER
HANDLE
UPPER
HANDLE
HANDLE KNOBS

CHARGING WHEN BATTERY REMOVED
FROM MOWER
2
36
Store mower in a secure location out of the reach
of children.
15
15
Two
one
Excessive charging can affect the capacity and
discharge time of the battery.
show charge is .complete
lightsindicator
Insert the charger connector into the receptacle on the
battery case.

Insert the switch key into the slot on the motor/ blade
control assembly.
Push the button on switch box and hold to allow access
to the switch bail wire.
Pull the switch control bail wire toward the mower handle
and let go of the switch button. Continue to hold the switch
control bail wire against the mower handle as you mow.
To stop the mower, release the switch control bail wire.
to lock in place.

SWITCH KEY
PUSH

environment
Remove the battery pack from the mower.
REPLACING THE CUTTING BLADE
See Figure 12-13.

when
the mower is not in use for optimum performance.If the battery has
UPPER
HANDLE
LOWER
HANDLE
HANDLE KNOBS
Remove the switch key and store in a secure location
out of the reach of children.
REPLACING WHEELS
See Figure 16.
To replace a wheel:
Stop the motor and remove the switch key.
Remove battery from the battery compartment.

1-800-377-5888 (USA), 1-800-561-0004 (CNA)
1-800-377-5888 (USA)
1-800-561-0004 (CNA)

MODEL 60236 T2

earthwise
Call us first with questions about operating or maintaining your lawn mower at 1-800-377-5888 (USA),
1-800-561-0004 (CNA) between 7:30 a.m. - 4:30 p.m. Eastern Standard Time, or send emails to
[email protected].

60236 T2
earthwise
Phone [phone] (USA)
1-800-561-0004 (CNA)
www.americanlawnmower.com
www.americanlawnmower.com.
SERVICE
For parts or service, contact your nearest Earthwise authorized service dealer. Be sure to provide
all relevant information when you call or visit. For the location of the authorized service dealer
nearest you, please call 1-800-377-5888 (USA), 1-800-561-0004 (CNA) or visit us online at
REPAIR PARTS
MODEL NUMBER
SERIAL NUMBER
The model number of this tool is found on a plate or label attached to the housing. Please
record the serial number in the space provided below.
60236 T2