EAST COAST DILHAM User manual

DILHAM COT BED

A x 2
B x 1
C x 2
D x 12 E x 12
IMPORTANT
PLEAsE READ THEsE INsTRuCTIONs CAREfuLLy &
RETAIN fOR fuTuRE REfERENCE
COT ASSEMBLY
4 x E
each end
4 x D
each end
Do not fully tighten screws at this stage.
2 x C
A
D
D
D
D
E
E
E
The dowel nuts (parts E) t into the holes in the sides and base.
The slot on one end of the nut indicates the direction of the
threaded hole and should be visible when the nut is inserted.
It is advisable to push each nut into its hole and check for
correct alignment before inserting any screws
The help of an
assistant will aid
assembly
PLEASE DISPOSE OF PACKAGING MATERIAL.
PLASTIC BAGS CAN BE DANGEROUS TO YOUNG CHILDREN
x1

4 x E
4 x D
BED ASSEMBLY
2 x A
B
2 x D
each end
Choose 1 of 3 positions
4 x E
B
When assembly has been completed, fully tighten all screws.

In cot mode there are three possible height positions for the base.
The lowest position is the safest and should always be used once the child can sit unaided.
The cot-bed is suitable for a mattress of 1360mm - 1400mm in length and
660mm - 700mm in width.
The thickness of the mattress should be such that the distance between the top of the
mattress and the top of the sides should be no less than 500mm with base in its lowest
position and no less than 200mm with the base in its highest position (indicated by
indentation on cot side).
IN USE
This cot has been designed and manufactured to BS EN 716:1996
Do not leave anything (large toys etc) in the cot which could provide a foothold or present a
danger of suffocation or strangulation.
Regularly check for security of fittings and ensure there are no loose screws which could trap
parts of the body or clothing (e.g strings, necklaces or ribbons for dummies) which would
pose a risk of strangulation.
Do not position too close to a strong source of heat e.g. open fires, electric fires or gas fires.
WARNING
YOUR CHILDREN’S SAFETY
IS YOUR RESPONSIBILITY
Regularly check for firmness of screws or damage which could render your cot bed unsafe or
cause splinters.
To clean use a damp cloth, avoiding the use of strong detergents or abrasives.
An occasional light application of a wax polish will help maintain a good appearance.
CARE AND MAINTENANCE
In the case of assembly difficulties, missing parts or other queries, please contact the
Customer Care Hotline for this product on;
01692 408802
East Coast Nursery Ltd.
Robertson House, North Walsham, Norfolk, NR28 0BX
EDC001